- radar_system_top.v: DC notch now masks to dop_bin[3:0] per sub-frame so both sub-frames get their DC zeroed correctly; rename DOPPLER_FFT_SIZE → DOPPLER_FRAME_CHIRPS to avoid confusion with the per-FFT size (now 16)
- radar_dashboard.py: remove fftshift (crosses sub-frame boundary), display raw Doppler bins, remove dead velocity constants
- golden_reference.py: model dual 16-pt FFT with per-sub-frame Hamming window, update DC notch and CFAR to match RTL
- fv_doppler_processor.sby: reference xfft_16.v / fft_twiddle_16.mem, raise BMC depth to 512 and cover to 1024
- fv_radar_mode_controller.sby: raise cover depth to 600
- fv_radar_mode_controller.v: pin cfg_* to reduced constants (documented as single-config proof), fix Property 5 mode guard, strengthen Cover 1
- STALE_NOTICE.md: document that real-data hex files are stale and need regeneration with external dataset
Closes#39
Initial commit of the AERIS-10 project website, including HTML structure, styling, and content for radar system overview, specifications, architecture, and documentation.
- usb_data_interface.v: Add 3 self-test status inputs, expand status packet
from 7 words (header + 5 data + footer) to 8 words (header + 6 data + footer).
New status_words[5] carries {busy, detail[7:0], flags[4:0]}.
- radar_system_top.v: Wire self_test_flags_latched, self_test_detail_latched,
self_test_busy to usb_data_interface ports. Add opcode 0x31 as status
readback alias so host can read self-test results.
- tb_usb_data_interface.v: Add self-test port connections, verify word 5 in
Group 16, add Group 18 (busy flag + partial failure variant). 81 checks pass.
- run_regression.sh: Add fpga_self_test.v to PROD_RTL lint list and system-
level compile lists. Add tb_fpga_self_test as Phase 1 unit test.
- 24/24 regression tests pass, lint clean (0 errors, 4 advisory warnings).
MTI canceller (2-pulse, H(z)=1-z^{-1}) between range decimator and
Doppler processor. Subtracts previous chirp from current, nulling DC
Doppler (stationary clutter). Pass-through when host_mti_enable=0.
DC notch filter (post-Doppler, pre-CFAR) zeros bins within
+/-host_dc_notch_width of DC. Complements MTI for residual clutter.
New host registers: 0x26 (mti_enable), 0x27 (dc_notch_width).
Both default to 0 (disabled) - fully backward-compatible.
Verification: 23/23 regression, 29/29 MTI standalone, 3/3 real-data
co-sim (5137/5137 exact match) all PASS.
Split ST_CFAR_THR into two pipeline stages (THR + MUL) to fix Build 23
timing violation (WNS = -0.309 ns). The combinational path from
leading_sum through GO/SO cross-multiply into alpha*noise DSP was too
long for 10 ns.
New pipeline:
ST_CFAR_THR: register noise_sum_comb (mode select + cross-multiply)
ST_CFAR_MUL: compute alpha * noise_sum_reg in DSP
ST_CFAR_CMP: compare + update window (unchanged)
3 cycles per CUT instead of 2 (~85 us vs 70 us per frame, negligible).
All detection results identical: 23/23 CFAR standalone, 22/22 full
regression, 3/3 real-data co-sim (5137/5137 exact match) PASS.
Serhii
NawfalMotii79
Jason