FlintyLemming/PLFM_RADAR
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Compare commits

merge into: FlintyLemming/PLFM_RADAR:fix/invariant-p0-signal-processing
Branches Tags
FlintyLemming/PLFM_RADAR:main FlintyLemming/PLFM_RADAR:develop FlintyLemming/PLFM_RADAR:fix/mcu-fault-ack-emergency-clear FlintyLemming/PLFM_RADAR:fix/mcu-volatile-emergency-state-agc-holdoff FlintyLemming/PLFM_RADAR:fix/agc-gain-arithmetic-overflow FlintyLemming/PLFM_RADAR:fix/pre-bringup-audit-p0 FlintyLemming/PLFM_RADAR:fix/xdc-hardening-and-adc-pin-anchors FlintyLemming/PLFM_RADAR:fix/adar1000-channel-rotation FlintyLemming/PLFM_RADAR:fix/adar1000-vm-tables FlintyLemming/PLFM_RADAR:fix/invariant-p0-signal-processing FlintyLemming/PLFM_RADAR:fix/agc-cross-layer-enable FlintyLemming/PLFM_RADAR:feat/fft-2048-upgrade FlintyLemming/PLFM_RADAR:feat/ft2232h-default-ft601-option FlintyLemming/PLFM_RADAR:feat/um982-gps-driver FlintyLemming/PLFM_RADAR:revert-68-feature/add-um982-gps-driver FlintyLemming/PLFM_RADAR:feat/agc-fpga-gui FlintyLemming/PLFM_RADAR:fix/ruff-lint-full-repo
..
pull from: FlintyLemming/PLFM_RADAR:main
Branches Tags
FlintyLemming/PLFM_RADAR:main FlintyLemming/PLFM_RADAR:develop FlintyLemming/PLFM_RADAR:fix/mcu-fault-ack-emergency-clear FlintyLemming/PLFM_RADAR:fix/mcu-volatile-emergency-state-agc-holdoff FlintyLemming/PLFM_RADAR:fix/agc-gain-arithmetic-overflow FlintyLemming/PLFM_RADAR:fix/pre-bringup-audit-p0 FlintyLemming/PLFM_RADAR:fix/xdc-hardening-and-adc-pin-anchors FlintyLemming/PLFM_RADAR:fix/adar1000-channel-rotation FlintyLemming/PLFM_RADAR:fix/adar1000-vm-tables FlintyLemming/PLFM_RADAR:fix/invariant-p0-signal-processing FlintyLemming/PLFM_RADAR:fix/agc-cross-layer-enable FlintyLemming/PLFM_RADAR:feat/fft-2048-upgrade FlintyLemming/PLFM_RADAR:feat/ft2232h-default-ft601-option FlintyLemming/PLFM_RADAR:feat/um982-gps-driver FlintyLemming/PLFM_RADAR:revert-68-feature/add-um982-gps-driver FlintyLemming/PLFM_RADAR:feat/agc-fpga-gui FlintyLemming/PLFM_RADAR:fix/ruff-lint-full-repo

32 Commits
fix/invariant-p0-signal-processing .. main

Author SHA1 Message Date
NawfalMotii79 8bd880ce4c Added BOM and Gerbers
AERIS-10 CI / MCU Firmware Tests (push) Successful in 55s
Details
AERIS-10 CI / Cross-Layer Contract Tests (push) Has been cancelled
Details
AERIS-10 CI / FPGA Regression (push) Has been cancelled
Details
AERIS-10 CI / Python Lint + Tests (push) Has been cancelled
Details 
BOM and Gerbers, ready to be sent to PCB manufacturer
 2026-04-22 01:04:28 +01:00
NawfalMotii79 33d21da7f2 Remove radar system image from README 
Removed the AERIS-10 Radar System image from the README.
 2026-04-20 19:04:08 +01:00
NawfalMotii79 18901be04a Fix image link and update mixer model in README 
Updated image link and corrected mixer model in specifications.
 2026-04-19 19:06:44 +01:00
NawfalMotii79 9f899b96e9 Add files via upload 2026-04-19 19:04:48 +01:00
NawfalMotii79 88ca1910ec Merge pull request #109 from NawfalMotii79/develop 
Release: merge develop into main
 2026-04-19 01:27:15 +01:00
Jason 2f5ddbd8a3 Merge pull request #110 from joyshmitz/docs/contributing-ai-usage-policy 
docs(contributing): add AI usage policy section (from #106)
 2026-04-18 16:46:30 +03:00
Serhii aa5d712aea docs(contributing): add AI usage policy section (closes #106 discussion) 
Surfaces the three-point AI usage policy Jason articulated in #106 by
placing it in CONTRIBUTING.md between "Code Standards & Tooling" and
"Running the Test Suites", so first-time AI-assisted contributors see
the expectation in the onboarding doc rather than having to discover
it via issue archaeology. Text is the #106 comment verbatim with two
small typo fixes only (use if AI -> use of AI; doesnt -> doesn't); no
structural or stylistic rewriting.

Per Jason's green light to open this PR in
NawfalMotii79/PLFM_RADAR#106 (comment-4273144522).
 2026-04-18 10:51:36 +03:00
Jason 475f390a13 docs: rewrite CONTRIBUTING.md with updated workflow and standards 2026-04-18 09:45:34 +05:45
Jason 0731aae2bc docs(readme): update features to list Hybrid AGC 2026-04-18 09:30:17 +05:45
Jason e62abc9170 fix(readme): point dashboard image to existing GUI_V6.gif 2026-04-18 09:28:26 +05:45
NawfalMotii79 d3476139e3 Merge pull request #89 from NawfalMotii79/feat/ft2232h-default-ft601-option 
feat: make FT2232H default USB interface, add FT601 premium option, deprecate GUI V6
 2026-04-17 22:21:58 +01:00
NawfalMotii79 8fac1cc1a0 Merge pull request #107 from NawfalMotii79/fix/adar1000-vm-tables 
fix(adar1000): populate VM_I/VM_Q phase tables; remove dead VM_GAIN
 2026-04-17 21:58:59 +01:00
Jason 7c91a3e0b9 fix(adar1000): populate VM_I/VM_Q phase tables; remove dead VM_GAIN 
The ADAR1000 vector-modulator I/Q lookup tables VM_I[128] and VM_Q[128]
were declared but defined as empty initialiser lists since the first
commit (5fbe97f). Every call to adarSetRxPhase / adarSetTxPhase therefore
wrote (I=0x00, Q=0x00) to registers 0x21/0x23 (Rx) and 0x32/0x34 (Tx)
regardless of the requested phase state, leaving beam steering completely
non-functional in firmware.

This commit:

* Populates VM_I[128] and VM_Q[128] from ADAR1000 datasheet Rev. B
  Tables 13-16 (p.34) on a uniform 2.8125 deg grid (360 / 128 states).
  Byte format: bits[7:6] reserved 0, bit[5] polarity (1 = positive
  lobe), bits[4:0] 5-bit unsigned magnitude - exactly as specified.
* Removes VM_GAIN[128] declaration and (empty) definition. The
  ADAR1000 has no separate VM gain register; per-channel VGA gain is
  set via CHx_RX_GAIN (0x10-0x13) / CHx_TX_GAIN (0x1C-0x1F) by
  adarSetRxVgaGain / adarSetTxVgaGain. VM_GAIN was never populated,
  never read anywhere in the firmware, and its presence falsely
  suggested a missing scaling step in the signal path.
* Adds 9_Firmware/tests/cross_layer/adar1000_vm_reference.py: an
  independently-derived ground-truth module containing the full
  datasheet table plus byte-format / uniform-grid / quadrant-symmetry
  / cardinal-point invariant checkers and a tolerant C array parser.
* Adds TestTier2Adar1000VmTableGroundTruth (9 tests) to
  test_cross_layer_contract.py, including a tokenising C/C++
  comment+string stripper used by the VM_GAIN reintroduction guard,
  and an adversarial self-test that corrupts one byte and asserts
  the comparison detects it (defends against silent bypass via
  future fixture/parser refactors).

Adversarially validated: removing the firmware definitions, flipping
a single byte, or reintroducing VM_GAIN as code each cause the suite
to fail; restoring causes it to pass. VM_GAIN appearing inside string
literals or comments correctly does NOT trip the guard.

Closes the empty-table half of the ADAR1000 phase-control bug class.
The separate channel-rotation issue (#90) will be addressed in a
follow-up PR.

Refs: 7_Components Datasheets and Application notes/ADAR1000.pdf
      Rev. B Tables 13-16 p.34
 2026-04-18 02:02:07 +05:45
Jason fd6cff5b2b Merge pull request #102 from JJassonn69/chore/sync-main-into-develop 
chore: sync main → develop (schematic updates + README + project doc)
 2026-04-17 19:31:31 +03:00
Jason 964f1903f3 chore: sync main → develop (schematic updates, README, project doc) 
Brings in main-only commits that never reached develop:
  754d919 Added silk screen and headers description (MainBoard .brd)
  0443516 Added thermal vias (RF_PA .brd)
  5fbe051 Added ABAC INDUSTRY web site (Project_Description.docx)
  12b549d / 5d5e9ff Merge PR #101: README BOM sensor counts fix

No conflicts expected: develop has not touched any of these paths.
 2026-04-17 22:12:26 +05:45
Jason 12b549dafb Merge pull request #101 from JJassonn69/fix/readme-bom-sensor-counts 
docs(readme): correct STM32 peripheral counts and locations to match production BOM
 2026-04-17 17:21:59 +03:00
Jason 5d5e9ff297 docs(readme): correct BOM sensor counts and locations 
The STM32 peripheral list in the README disagreed with the production
BOM (4_7_Production Files/Gerber_Main_Board/RADAR_Main_Board_BOM_csv)
and with the firmware (9_1_Microcontroller/.../main.cpp). Corrections
based on origin/main commit 754d919:

- ADS7830 Idq ADCs: placed on the Main Board (U88 @ 0x48, U89 @ 0x4A),
  not on the Power Amplifier Boards. Added the INA241A3 (x50) and 5 mOhm
  shunt detail that completes the current-sense chain.
- DAC5578 Vg DACs: placed on the Main Board (U7 @ 0x48, U69 @ 0x49),
  not on the Power Amplifier Boards. Noted closed-loop Idq calibration
  at boot (main.cpp powerUpSequence).
- Temperature sensors: 1x ADS7830 (U10) with 8 single-ended channels
  reading 8 thermistors -- not 8 separate ADS7830 chips. Cooling is a
  single GPIO (EN_DIS_COOLING), bang-bang, not PWM.
- GPS: reflect the UM982 driver merged in #79 and its role in
  per-detection position tagging beyond map centering.

Counts now match the 3x ADS7830 / 2x DAC5578 / 16x INA241A3 population
in the production BOM.
 2026-04-17 20:04:01 +05:45
NawfalMotii79 754d919e44 Added silk screen and headers description 2026-04-16 23:48:23 +01:00
NawfalMotii79 0443516cc9 Added thermal vias 2026-04-16 23:47:24 +01:00
NawfalMotii79 5fbe0513b5 Added ABAC INDUSTRY web site 2026-04-16 23:46:08 +01:00
Jason c3db8a9122 Merge pull request #96 from joyshmitz/chore/remove-dead-adar1000-c-api 
chore(mcu): remove dead C-style adar1000 driver
 2026-04-16 23:51:22 +03:00
Jason ec8256e25a Merge pull request #95 from joyshmitz/test/agc-debounce-enforce 
test(cross-layer): enforce 2-frame DIG_6 debounce guard on outerAgc.enabled (follow-up to #93)
 2026-04-16 23:42:12 +03:00
Serhii 8e1b3f22d2 chore(mcu): remove dead C-style adar1000 driver 
The firmware uses the C++ ADAR1000_Manager class exclusively. The C-style
driver pair (adar1000.c, 693 LoC; adar1000.h, 294 LoC) has no external
call sites:

  grep -rn "Adar_Set|Adar_Read|Adar_Write|Adar_Soft" 9_Firmware
  grep -rn "AdarDevice|AdarBiasCurrents|AdarDeviceInfo" 9_Firmware

Both return hits only inside adar1000.c/h themselves. ADAR1000_Manager.h
has its own copies of REG_CH1_*, REG_INTERFACE_CONFIG_A, etc. and does
not include adar1000.h. main.cpp had a lone #include "adar1000.h" but
referenced no symbols from it; the REG_* macros it uses resolve through
ADAR1000_Manager.h on the next line.

No behaviour change: the deleted code was unreachable.

Side note on #90: adar1000.c contained a second copy of the
REG_CH1_* + (channel & 0x03) channel-rotation pattern tracked in #90
(lines 349, 397-398, 472, 520-521). This commit does not fix #90 --
the live path in ADAR1000_Manager.cpp still needs the channel-index
fix -- but it removes the dormant copy so the bug has one less place
to hide.

Verification:
- 9_Firmware/9_1_Microcontroller/tests: make clean && make -> all passing
  (51/51 UM982 GPS, 24/24 driver, 13/13 ADAR1000_AGC, bugs #1-15, Gap-3
  fixes 1-5, safety fixes)
- 9_Firmware/tests/cross_layer: 29 passed
- grep -rn "adar1000\.h|adar1000\.c|Adar_|AdarDevice" 9_Firmware: 0 hits
 2026-04-16 22:12:23 +03:00
Serhii 15ae940be5 test(cross-layer): enforce 2-frame DIG_6 debounce guard on outerAgc.enabled 
PR #93 added a 2-frame confirmation debounce so a single-sample GPIO
glitch cannot flip MCU outer-loop AGC state. The debounce is load-bearing
for the "prevents a single-sample glitch" guarantee in the PR body, but
no existing test enforces its structure — test_mcu_reads_dig6_before_agc_gate
only checks that HAL_GPIO_ReadPin(FPGA_DIG6, ...) and `outerAgc.enabled =`
appear somewhere in main.cpp, which a naive direct assignment would still
pass.

Add test_mcu_dig6_debounce_guards_enable_assignment to
TestTier1AgcCrossLayerInvariant, verifying four structural invariants of
the debounce:

  1. Current DIG_6 sample captured in a local variable
  2. Static previous-frame variable defaulting to false (matches FPGA
     boot: host_agc_enable resets 0)
  3. outerAgc.enabled assignment gated by `now == prev`
  4. Previous-frame variable advanced each frame

Verified test fails on a naive patch that removes the guard and passes
on the current PR #93 implementation. Full cross-layer suite stays at
0 failures (36/36 pass locally).
 2026-04-16 21:29:37 +03:00
Jason 658752abb7 fix: propagate FPGA AGC enable to MCU outer loop via DIG_6 GPIO 
Resolve cross-layer AGC control mismatch where opcode 0x28 only
controlled the FPGA inner-loop AGC but the STM32 outer-loop AGC
(ADAR1000_AGC) ran independently with its own enable state.

FPGA: Drive gpio_dig6 from host_agc_enable instead of tied low,
making the FPGA register the single source of truth for AGC state.

MCU: Change ADAR1000_AGC constructor default from enabled(true) to
enabled(false) so boot state matches FPGA reset default (AGC off).
Read DIG_6 GPIO every frame with 2-frame confirmation debounce to
sync outerAgc.enabled — prevents single-sample glitch from causing
spurious AGC state transitions.

Tests: Update MCU unit tests for new default, add 6 cross-layer
contract tests verifying the FPGA-MCU-GUI AGC invariant chain.
 2026-04-17 00:04:37 +05:45
Jason 76cfc71b19 fix(gui): align radar parameters to FPGA truth (radar_scene.py) 
- Bandwidth 500 MHz -> 20 MHz, sample rate 4 MHz -> 100 MHz (DDC output)
- Range formula: deramped FMCW -> matched-filter c/(2*Fs)*decimation
- Velocity formula: use PRI (167 us) and chirps_per_subframe (16)
- Carrier frequency: 10.525 GHz -> 10.5 GHz per radar_scene.py
- Range per bin: 4.8 m -> 24 m, max range: 307 m -> 1536 m
- Fix simulator target spawn range to match new coverage (50-1400 m)
- Remove dead BANDWIDTH constant, add SAMPLE_RATE to V65 Tk
- All 174 tests pass, ruff clean
 2026-04-16 21:35:01 +05:45
Jason 161e9a66e4 fix: clarify comments — AGC width, dual-USB docstring, BE datasheet ref 2026-04-16 17:51:09 +05:45
Jason 7a35f42e61 refactor(fpga): deduplicate RTL file lists in run_regression.sh 
Extract RECEIVER_RTL and SYSTEM_RTL shared arrays to replace 6
near-identical file lists. New modules now only need adding once.
 2026-04-16 17:07:01 +05:45
Jason a03dd1329a fix(tests): update cross-layer tests for frame_start bit and stream-gated mux 
- TB byte 9 check: expect 0x81 (frame_start=1 after reset + cfar=1)
- contract_parser: handle ternary expressions in data_pkt_byte mux
  (stream_doppler_en ? doppler_real_cap : 8'd0 pattern)
- contract_parser: handle intermediate variable pattern for detection
  field (det_byte = raw[9]; detection = det_byte & 0x01)
 2026-04-16 16:48:43 +05:45
Jason 6a11d33ef7 docs: deprecate GUI V6, update docs for FT2232H production default 
- Add deprecation headers to GUI_V6.py and GUI_V6_Demo.py
- Mark V6 as deprecated in GUI_versions.txt
- Update README.md: replace V6 GIF reference with V65 PNG
- Add FT2232H production notice banner to docs/index.html
 2026-04-16 16:19:30 +05:45
Jason b22cadb429 feat(gui): add FT601Connection class, USB interface selection in V65/V7 
- Add FT601Connection in radar_protocol.py using ftd3xx library with
  proper setChipConfiguration re-enumeration handling (close, wait 2s,
  re-open) and 4-byte write alignment
- Add USB Interface dropdown to V65 Tk GUI (FT2232H default, FT601 option)
- Add USB Interface combo to V7 PyQt dashboard with Live/File mode toggle
- Fix mock frame_start bit 7 in both FT2232H and FT601 connections
- Use FPGA range data from USB packets instead of recomputing in Python
- Export FT601Connection from v7/hardware.py and v7/__init__.py
- Add 7 FT601Connection tests (91 total in test_GUI_V65_Tk.py)
 2026-04-16 16:19:13 +05:45
Jason f393e96d69 feat(fpga): make FT2232H default USB interface, rewrite FT601 write FSM, add clock-loss watchdog 
- Set USB_MODE default to 1 (FT2232H) in radar_system_top.v; 200T build
  overrides to USB_MODE=0 via build_200t.tcl generic property
- Rewrite FT601 write FSM: 4-state architecture with 3-word packed data,
  pending-flag gating, and frame sync counter
- Add FT2232H read FSM rd_cmd_complete flag, stream field zeroing, and
  range_data_ready 1-cycle pipeline delay in both USB modules
- Implement clock-loss watchdog: ft_heartbeat toggle + 16-bit timeout
  counter drives ft_clk_lost, feeding ft_effective_reset_n via 2-stage
  ASYNC_REG synchronizer chain
- Fix sample_counter reset literal width (11'd0 -> 12'd0)
- Add FT2232H I/O timing constraints to 50T XDC; fix dac_clk comments
- Document vestigial ft601_txe_n/rxf_n ports (needed for 200T XDC)
- Tie off AGC ports on TE0713 dev wrapper
- Rewrite tb_usb_data_interface.v for new 4-state FSM (89 checks)
- Add USB_MODE=1 regression runs; remove dead CHECK 5/6 loop
- Update diag_log.h USB interface comment
 2026-04-16 16:18:52 +05:45
104 changed files with 969086 additions and 855240 deletions
Expand all files Collapse all files
1_Project_Description/Project_Description.docx
BIN
View File
Binary file not shown.
4_Schematics and Boards Layout/4_6_Schematics/MainBoard/RADAR_Main_Board.brd
+72 -23
View File
@@ -550,7 +550,7 @@
<text x="3.085225" y="81.68279375" size="1.778" layer="51">GND</text>
<text x="2.3" y="53.85" size="1.778" layer="51">GND</text>
<text x="3.336225" y="42.247028125" size="1.778" layer="51">GND</text>
<text x="2.25" y="11.75" size="1.778" layer="51">GND</text>
<text x="2.99881875" y="12.58869375" size="1.778" layer="51">GND</text>
<text x="21.75" y="12.15" size="1.778" layer="51" rot="R90">GND</text>
<text x="37.45" y="10.05" size="1.778" layer="51" rot="R90">GND</text>
<text x="60.5" y="9.4" size="1.778" layer="51" rot="R90">GND</text>
@@ -589,11 +589,11 @@
<text x="248.95" y="49.2" size="1.778" layer="51" rot="R180">GND</text>
<text x="248.85" y="66.55" size="1.778" layer="51" rot="R180">GND</text>
<text x="248.8" y="82.9" size="1.778" layer="51" rot="R180">GND</text>
<text x="256.35" y="101.95" size="1.778" layer="51" rot="R180">GND</text>
<text x="249.4" y="112.5" size="1.778" layer="51" rot="R180">GND</text>
<text x="253.964015625" y="102.099125" size="1.778" layer="51" rot="R180">GND</text>
<text x="249.054865625" y="112.111771875" size="1.778" layer="51" rot="R180">GND</text>
<text x="237.75" y="280.1" size="1.778" layer="51" rot="R270">GND</text>
<text x="199.75" y="273.55" size="1.778" layer="51" rot="R270">GND</text>
<text x="188.45" y="272.75" size="1.778" layer="51" rot="R270">GND</text>
<text x="188.539503125" y="273.018421875" size="1.778" layer="51" rot="R270">GND</text>
<text x="177.95" y="272.75" size="1.778" layer="51" rot="R270">GND</text>
<text x="113.4" y="281.65" size="1.778" layer="51" rot="R270">GND</text>
<text x="2.992190625" y="248.58331875" size="1.778" layer="51">GND</text>
@@ -635,13 +635,13 @@
<wire x1="161.6" y1="158.7" x2="156.95" y2="163.4" width="2.54" layer="29"/>
<wire x1="170.1" y1="150.2" x2="165.45" y2="154.9" width="2.54" layer="29"/>
<text x="125.137784375" y="269.740521875" size="1.778" layer="51" rot="R90">+5V0_PA_1</text>
<text x="185.45" y="267.2" size="1.778" layer="51" rot="R90">-3V4</text>
<text x="196.5" y="267.4" size="1.778" layer="51" rot="R90">+3V4</text>
<text x="182.675396875" y="267.73684375" size="1.778" layer="51" rot="R90">-3V4</text>
<text x="193.277878125" y="266.86315625" size="1.778" layer="51" rot="R90">+3V4</text>
<text x="207.4" y="267.85" size="1.778" layer="51" rot="R90">-5V0_ADAR12</text>
<text x="188.75" y="289.05" size="1.3" layer="51" rot="R45">+3V3_ADAR12</text>
<text x="248.25" y="270.6" size="1.778" layer="51" rot="R90">+5V0_PA_2</text>
<text x="242.8" y="98.7" size="1.778" layer="51" rot="R180">+3V4</text>
<text x="242.9" y="106.65" size="1.778" layer="51" rot="R180">-3V4</text>
<text x="249.695853125" y="96.471690625" size="1.778" layer="51" rot="R180">+3V4</text>
<text x="249.232640625" y="104.692303125" size="1.778" layer="51" rot="R180">-3V4</text>
<text x="181.4" y="99.15" size="1.778" layer="51" rot="R270">-5V0_ADAR34</text>
<text x="185.3" y="75.15" size="1.778" layer="51" rot="R270">+3V3_ADAR34</text>
<text x="238.95" y="72.8" size="1.778" layer="51">+3V3_VDD_SW</text>
@@ -714,8 +714,8 @@
<text x="147.05" y="25.3" size="1.778" layer="51" rot="R180">CHAN14</text>
<text x="157.1" y="25.25" size="1.778" layer="51" rot="R180">CHAN15</text>
<text x="167.15" y="25.35" size="1.778" layer="51" rot="R180">CHAN16</text>
<text x="50.15" y="131.25" size="1.778" layer="51" rot="R180">SV1</text>
<text x="43.25" y="128.5" size="1.778" layer="51" rot="R270">VOLTAGE SEQUENCING</text>
<text x="51.802165625" y="131.052934375" size="1.778" layer="51" rot="R180">SV1</text>
<text x="35.60243125" y="132.092775" size="1.778" layer="51" rot="R270">VOLTAGE SEQUENCING</text>
<text x="105.55" y="106.9" size="1.2" layer="51" rot="R90">AD9523_EEPROM_SEL</text>
<text x="107.2" y="101.85" size="1.2" layer="51" rot="R45">AD9523_STATUS0</text>
<text x="107.25" y="99.35" size="1.2" layer="51" rot="R45">STM32_MOSI4</text>
@@ -728,20 +728,19 @@
<text x="99.8" y="100.75" size="1.2" layer="51" rot="R225">STM32_MISO4</text>
<text x="99.8" y="103.4" size="1.2" layer="51" rot="R225">AD9523_STATUS1</text>
<text x="99.7" y="105.85" size="1.2" layer="51" rot="R225">GND</text>
<text x="68.7" y="82.55" size="1.778" layer="51">JP4</text>
<text x="64.25" y="73.85" size="1.778" layer="51" rot="R270">GND</text>
<text x="68.73355625" y="72.201796875" size="1.778" layer="51">JP4</text>
<text x="62.77508125" y="75.956934375" size="1" layer="51" rot="R225">GND</text>
<text x="56.95" y="82.75" size="1.778" layer="51">JP9</text>
<text x="37.85" y="78.6" size="1.778" layer="51" rot="R90">JP2</text>
<text x="43.95" y="88.9" size="1.778" layer="51">JP8</text>
<text x="29.1" y="93.2" size="1.778" layer="51">JP7</text>
<text x="21.75" y="85.35" size="1.778" layer="51">JP18</text>
<text x="45.798875" y="84.61879375" size="1.778" layer="51" rot="R180">JP2</text>
<text x="43.09716875" y="85.33433125" size="1.778" layer="51" rot="R90">JP8</text>
<text x="29.1" y="93.2" size="1.778" layer="51">IMU</text>
<text x="27.568784375" y="88.61074375" size="1.778" layer="51">JP18</text>
<text x="89.3" y="75.5" size="1.778" layer="51" rot="R180">JP13</text>
<text x="75.2" y="77" size="1.778" layer="51" rot="R270">GND</text>
<text x="69.6" y="74.1" size="1.778" layer="51" rot="R270">GND</text>
<text x="62.9" y="82.75" size="1.778" layer="51">JP10</text>
<text x="53.75" y="64.4" size="1.2" layer="51" rot="R45">STEPPER_CLK+</text>
<text x="43.9" y="78.65" size="1.778" layer="51" rot="R270">GND</text>
<text x="53.95" y="86.4" size="1.778" layer="51">GND</text>
<text x="62.1909375" y="71.621040625" size="1.778" layer="51">JP10</text>
<text x="54.996875" y="70.359128125" size="1.2" layer="51">STEPPER</text>
<text x="43.9" y="78.65" size="1.27" layer="51" rot="R270">GND</text>
<text x="52.61158125" y="88.897171875" size="1.016" layer="51" rot="R90">GND</text>
<text x="31.3" y="84.75" size="1.778" layer="51" rot="R270">GND</text>
<text x="40.45" y="95.9" size="1.778" layer="51" rot="R90">GND</text>
<rectangle x1="12.8295" y1="256.5735" x2="15.6235" y2="256.7005" layer="51"/>
@@ -5387,6 +5386,56 @@
<text x="122.221528125" y="146.5440625" size="1.27" layer="51" rot="R315">RX 3_4</text>
<text x="145.05015" y="114.518025" size="1.27" layer="51" rot="R45">RX 4_4</text>
<text x="150.25345625" y="4.79933125" size="5.4864" layer="51" font="vector">www.abac-industry.com</text>
<text x="47.269546875" y="127.64274375" size="1.27" layer="51" rot="R135">+1V0_FPGA</text>
<text x="47.220515625" y="125.152134375" size="1.27" layer="51" rot="R135">+1V8_FPGA</text>
<text x="47.270815625" y="122.549565625" size="1.27" layer="51" rot="R135">+3V3_FPGA</text>
<text x="47.317503125" y="119.8292125" size="1.27" layer="51" rot="R135">+5V0_ADAR</text>
<text x="47.30423125" y="117.319196875" size="1.27" layer="51" rot="R135">+3V3_ADAR12</text>
<text x="47.2552" y="114.8285875" size="1.27" layer="51" rot="R135">+3V3_ADAR34</text>
<text x="47.3055" y="112.22601875" size="1.27" layer="51" rot="R135">+3V3_ADTR</text>
<text x="47.3521875" y="109.505665625" size="1.27" layer="51" rot="R135">+3V3_SW</text>
<text x="47.262328125" y="107.0494875" size="1.27" layer="51" rot="R135">+3V3_VDD_SW</text>
<text x="47.262328125" y="104.6232625" size="1.27" layer="51" rot="R135">+5V0_PA1</text>
<text x="52.848896875" y="114.716634375" size="1.27" layer="51" rot="R315">GND</text>
<text x="52.897928125" y="117.20724375" size="1.27" layer="51" rot="R315">+3V3_CLOCK</text>
<text x="52.847628125" y="119.8098125" size="1.27" layer="51" rot="R315">+1V8_CLOCK</text>
<text x="52.800940625" y="122.530165625" size="1.27" layer="51" rot="R315">+5V5_PA</text>
<text x="52.8908" y="124.98634375" size="1.27" layer="51" rot="R315">+5V0_PA3</text>
<text x="52.8908" y="127.41256875" size="1.27" layer="51" rot="R315">+5V0_PA2</text>
<text x="52.866228125" y="112.238071875" size="1.27" layer="51" rot="R315">GND</text>
<text x="52.79689375" y="109.7075125" size="1.27" layer="51" rot="R315">GND</text>
<text x="52.7795625" y="107.038290625" size="1.27" layer="51" rot="R315">GND</text>
<text x="52.762228125" y="104.50773125" size="1.27" layer="51" rot="R315">GND</text>
<text x="37.741834375" y="95.9444" size="1.778" layer="51" rot="R90">+3V3</text>
<text x="43.11376875" y="95.9444" size="1.778" layer="51" rot="R90">SCL3</text>
<text x="45.64435" y="95.9888" size="1.778" layer="51" rot="R90">SDA3</text>
<text x="48.232090625" y="95.98181875" size="1.016" layer="51" rot="R90">MAG_DRDY</text>
<text x="50.801084375" y="95.879059375" size="1.016" layer="51" rot="R90">ACC_INT</text>
<text x="52.907659375" y="95.95613125" size="1.016" layer="51" rot="R90">GYR_INT</text>
<text x="54.502678125" y="92.739546875" size="1.778" layer="51">JP7</text>
<text x="30.45236875" y="78.6816375" size="1.778" layer="51" rot="R90">+3V3</text>
<text x="35.56853125" y="79.257065625" size="1.778" layer="51" rot="R90">SCL3</text>
<text x="38.227" y="78.789975" size="1.778" layer="51" rot="R90">SDA3</text>
<text x="39.282209375" y="78.488071875" size="1.27" layer="51" rot="R270">+3V3</text>
<text x="41.4419875" y="78.63334375" size="1.27" layer="51" rot="R270">STM32_SWCLK</text>
<text x="46.663971875" y="78.473509375" size="1.27" layer="51" rot="R270">STM32_SWDIO</text>
<text x="49.16839375" y="78.5267875" size="1.27" layer="51" rot="R270">STM32_NRST</text>
<text x="51.7793875" y="78.473509375" size="1.27" layer="51" rot="R270">STM32_SWO</text>
<text x="53.6100625" y="82.81805625" size="1.27" layer="51" rot="R315">GND</text>
<text x="53.75804375" y="77.6019375" size="1.27" layer="51" rot="R315">GND</text>
<text x="53.809425" y="80.29940625" size="1.27" layer="51" rot="R315">CW+</text>
<text x="53.520859375" y="75.467190625" size="1.27" layer="51" rot="R315">CLK+</text>
<text x="50.081" y="88.941571875" size="1.016" layer="51" rot="R90">RX5</text>
<text x="47.417228125" y="88.985971875" size="1.016" layer="51" rot="R90">TX5</text>
<text x="45.019834375" y="88.675175" size="1.016" layer="51" rot="R90">+3V3</text>
<text x="53.525646875" y="86.07393125" size="1.778" layer="51">GPS</text>
<text x="62.34479375" y="80.785540625" size="0.9" layer="51" rot="R45">EN/DIS_RFPA_VDD</text>
<text x="68.0472625" y="76.328084375" size="1" layer="51" rot="R225">GND</text>
<text x="67.5982" y="80.711553125" size="0.9" layer="51" rot="R45">EN/DIS_COOLING</text>
<text x="78.325053125" y="83.140434375" size="1.778" layer="51">ADF4382</text>
<text x="92.67903125" y="80.894575" size="1.016" layer="51">1</text>
<text x="92.77235625" y="78.2390125" size="1.016" layer="51">2</text>
<text x="73.362715625" y="77.945809375" size="1.016" layer="51">14</text>
</plain>
<libraries>
<library name="eagle-ltspice">
@@ -24576,8 +24625,8 @@ Your PCBWay Team
<vertex x="114" y="112" curve="-180"/>
</polygon>
<polygon width="0.254" layer="1" spacing="5.08">
<vertex x="258.75" y="116" curve="-180"/>
<vertex x="254.75" y="112" curve="-180"/>
<vertex x="258.9164" y="116.0208" curve="-180"/>
<vertex x="254.9164" y="112.0208" curve="-180"/>
</polygon>
<polygon width="0.254" layer="1" spacing="5.08">
<vertex x="260" y="300"/>
4_Schematics and Boards Layout/4_6_Schematics/PowerAmplifierBoard/RF_PA.brd
+2380 -127
View File
File diff suppressed because it is too large Load Diff
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/BOM_Main_Board.xlsx
BIN
View File
Binary file not shown.
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/CPL.xlsx
BIN
View File
Binary file not shown.
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/RADAR_Main_Board.L1
+2239 -1960
View File
File diff suppressed because it is too large Load Diff
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/RADAR_Main_Board.L10
+1549 -960
View File
File diff suppressed because it is too large Load Diff
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/RADAR_Main_Board.L2
+208673 -188312
View File
File diff suppressed because it is too large Load Diff
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/RADAR_Main_Board.L3
+30395 -25554
View File
File diff suppressed because it is too large Load Diff
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/RADAR_Main_Board.L4
+35397 -30274
View File
File diff suppressed because it is too large Load Diff
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/RADAR_Main_Board.L5
+208673 -188312
View File
File diff suppressed because it is too large Load Diff
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/RADAR_Main_Board.L6
+29185 -24314
View File
File diff suppressed because it is too large Load Diff
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/RADAR_Main_Board.L7
+208673 -188312
View File
File diff suppressed because it is too large Load Diff
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/RADAR_Main_Board.L8
+36406 -31819
View File
File diff suppressed because it is too large Load Diff
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/RADAR_Main_Board.L9
+172256 -151874
View File
File diff suppressed because it is too large Load Diff
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/RADAR_Main_Board.csv
+105
View File
@@ -0,0 +1,105 @@
"Qty";"Value";"Device";"Package";"Parts";"Description";"AVAILABILITY";"CHECK_PRICES";"COPYRIGHT";"DATASHEET";"DESCRIPTION";"HEIGHT";"MANUFACTURER_NAME";"MANUFACTURER_PART_NUMBER";"MF";"MFR_NAME";"MOUSER_PART_NUMBER";"MOUSER_PRICE-STOCK";"MP";"MPN";"OC_FARNELL";"OC_NEWARK";"PACKAGE";"POPULARITY";"PRICE";"PROD_ID";"REFDES";"SNAPEDA_LINK";"SPICEMODEL";"SPICEPREFIX";"TYPE";"VALUE";
"11";"";"L-EUL5650M";"L5650M";"L1, L11, L12, L13, L14, L15, L16, L17, L18, L21, L23";"INDUCTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"";"";"";"";"L";"";"";
"1";"";"MA10-2";"MA10-2";"SV1";"PIN HEADER";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"unknown";"unknown";"";"3";"";"";"";"";"";"";"";"";
"1";"";"PINHD-1X2";"1X02";"JP20";"PIN HEADER";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"98";"";"";"";"";"";"";"";"";
"11";"";"PINHD-1X3";"1X03";"JP4, JP5, JP6, JP10, JP11, JP12, JP14, JP15, JP16, JP17, JP19";"PIN HEADER";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"92";"";"";"";"";"";"";"";"";
"3";"";"PINHD-1X4";"1X04";"JP8, JP9, JP18";"PIN HEADER";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"91";"";"";"";"";"";"";"";"";
"1";"";"PINHD-1X6";"1X06";"JP2";"PIN HEADER";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"79";"";"";"";"";"";"";"";"";
"1";"";"PINHD-1X8";"1X08";"JP7";"PIN HEADER";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"67";"";"";"";"";"";"";"";"";
"1";"";"PINHD-2X4";"2X04";"JP3";"PIN HEADER";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"47";"";"";"";"";"";"";"";"";
"1";"";"PINHD-2X6";"2X06";"JP1";"PIN HEADER";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"8";"";"";"";"";"";"";"";"";
"1";"";"PINHD-2X7";"2X07";"JP13";"PIN HEADER";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"8";"";"";"";"";"";"";"";"";
"1";"";"SJ2W";"SJ_2";"SJ1";"SMD solder JUMPER";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"7";"";"";"";"";"";"";"";"";
"71";"0.1uF";"CC0201";"C0201";"C1, C2, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C36, C38, C39, C41, C42, C44, C45, C46, C47, C51, C52, C53, C56, C67, C69, C74, C80, C82, C125, C131, C133, C138, C140, C146, C148, C159, C160, C162, C168, C170, C175, C188, C189, C190, C192, C193, C194, C195, C196, C201, C203, C208, C210, C215, C217, C222, C224, C229, C231, C236, C238, C243, C245, C250, C252, C293";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"4";"0.1µF";"C-EUC0402";"C0402";"C48, C49, C57, C58";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"18";"";"";"";"";"";"C";"";"";
"6";"0.1µF";"CC0201";"C0201";"C277, C278, C295, C297, C299, C301";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"1";"0.2pF";"C-EUC0201";"C0201";"C43";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"";"";"";"";"C";"";"";
"13";"0.47uF";"CC0201";"C0201";"C110, C111, C112, C113, C155, C156, C157, C158, C179, C180, C181, C182, C291";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"1";"0.6pF";"C-EUC0201";"C0201";"C54";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"";"";"";"";"C";"";"";
"4";"0R";"RR0201";"R0201";"R18, R19, R34, R35";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"R";"";"";
"12";"100R";"RR0201";"R0201";"R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R173";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"R";"";"";
"28";"100nF";"C-EUC0402";"C0402";"C76, C78, C258, C259, C260, C262, C264, C266, C313, C317, C320, C324, C327, C331, C334, C337, C339, C341, C342, C343, C344, C345, C346, C347, C348, C349, C350, C351";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"18";"";"";"";"";"";"C";"";"";
"24";"100nF";"CC0201";"C0201";"C24, C25, C26, C27, C28, C29, C30, C32, C33, C34, C35, C50, C256, C257, C279, C281, C298, C302, C303, C304, C305, C306, C307, C310";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"34";"100pF";"CC0201";"C0201";"C66, C68, C73, C79, C81, C124, C130, C132, C137, C139, C145, C147, C152, C161, C167, C169, C174, C183, C200, C202, C207, C209, C214, C216, C221, C223, C228, C230, C235, C237, C242, C244, C249, C251";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"2";"103pF";"CC0201";"C0201";"C60, C63";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"1";"106pF";"CC0201";"C0201";"C141";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"4";"107.3nH";"LL0201";"L0201";"L22, L25, L26, L27";"INDUCTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"L";"";"";
"9";"10k";"RR0201";"R0201";"R39, R40, R83, R84, R111, R123, R145, R151, R153";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"R";"";"";
"16";"10nF";"CC0201";"C0201";"C102, C103, C104, C105, C106, C107, C114, C115, C116, C117, C118, C119, C120, C121, C122, C123";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"2";"10uF";"CC0201";"C0201";"C37, C40";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"12";"10µF";"C-EUC0805";"C0805";"C75, C77, C312, C316, C319, C323, C326, C330, C333, C336, C338, C340";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"88";"";"";"";"";"";"C";"";"";
"1";"115R";"R-EU_R0201";"R0201";"R14";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"";"";"";"";"R";"";"";
"2";"12nH";"LL0201";"L0201";"L2, L8";"INDUCTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"L";"";"";
"2";"12pF";"CC0201";"C0201";"C184, C185";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"37";"142-0731-211";"142-0731-211";"1420731211";"J1, J18, J20, J22, J23, J24, J25, J26, J27, J28, J29, J30, J31, J32, J33, J34, J35, J36, J37, J38, J39, J40, J41, J42, J43, J44, J45, J46, J47, J48, J49, J50, J51, J52, J53, J54, J55";"SMA Connector Jack, Female Socket 50 Ohms Through Hole Solder";"";"";"";"";"SMA Connector Jack, Female Socket 50 Ohms Through Hole Solder";"9.8852mm";"Cinch Connectivity Solutions";"142-0731-211";"";"";"530-142-0731-211";"https://www.mouser.co.uk/ProductDetail/Johnson-Cinch-Connectivity-Solutions/142-0731-211?qs=HFfMDpzxxd0OVzI3hm9tuA%3D%3D";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"2";"159nH";"LL0201";"L0201";"L3, L4";"INDUCTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"L";"";"";
"2";"18pF";"CC0201";"C0201";"C272, C274";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"1";"1k";"R-EU_R0402";"R0402";"R37";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"";"";"";"";"R";"";"";
"49";"1k";"RR0201";"R0201";"R41, R43, R55, R56, R57, R58, R59, R61, R82, R85, R86, R87, R88, R93, R94, R99, R100, R101, R102, R107, R108, R109, R118, R124, R125, R126, R127, R128, R129, R130, R131, R133, R134, R135, R136, R137, R138, R139, R140, R144, R147, R148, R149, R167, R168, R169, R170, R171, R172";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"R";"";"";
"1";"1k2_1%";"RR0201";"R0201";"R60";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"R";"";"";
"7";"1nF";"C-EUC0402";"C0402";"C314, C318, C321, C325, C328, C332, C335";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"18";"";"";"";"";"";"C";"";"";
"51";"1pF";"CC0201";"C0201";"C70, C71, C72, C83, C84, C85, C126, C128, C129, C134, C135, C136, C142, C143, C144, C149, C150, C151, C163, C165, C166, C171, C172, C173, C197, C198, C199, C204, C205, C206, C211, C212, C213, C218, C219, C220, C225, C226, C227, C232, C233, C234, C239, C240, C241, C246, C247, C248, C253, C254, C255";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"16";"1uF";"CC0201";"C0201";"C86, C87, C88, C89, C90, C91, C92, C93, C94, C95, C96, C97, C98, C99, C100, C101";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"3";"1µF";"CC0201";"C0201";"C276, C296, C300";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"1";"2.2k";"RR0201";"R0201";"R146";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"R";"";"";
"3";"2.2uF";"CC0201";"C0201";"C22, C23, C164";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"16";"2.443k";"RR0201";"R0201";"R89, R90, R91, R92, R95, R96, R97, R98, R103, R104, R105, R106, R119, R120, R121, R122";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"R";"";"";
"1";"2.7pF";"C-EUC0402";"C0402";"C3";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"18";"";"";"";"";"";"C";"";"";
"2";"2.7pF";"CC0201";"C0201";"C18, C19";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"4";"200R";"RR0201";"R0201";"R16, R17, R20, R21";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"R";"";"";
"1";"20k";"R-EU_R0402";"R0402";"R38";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"";"";"";"";"R";"";"";
"40";"22-23-2021";"22-23-2021";"22-23-2021";"X1, X4, X5, X6, X7, X8, X9, X10, X11, X12, X13, X14, X15, X16, X17, X18, X19, X20, X21, X22, X24, X54, X55, X56, X_1, X_2, X_3, X_4, X_5, X_6, X_7, X_8, X_9, X_10, X_11, X_12, X_13, X_14, X_15, X_16";".100" (2.54mm) Center Header - 2 Pin";"";"";"";"";"";"";"";"";"MOLEX";"";"";"";"";"22-23-2021";"1462926";"25C3832";"";"40";"";"";"";"";"";"";"";"";
"16";"22-23-2031";"22-23-2031";"22-23-2031";"X3, X38, X39, X40, X41, X42, X43, X44, X45, X46, X47, X48, X49, X50, X51, X52";".100" (2.54mm) Center Header - 3 Pin";"";"";"";"";"";"";"";"";"MOLEX";"";"";"";"";"22-23-2031";"1462950";"30C0862";"";"35";"";"";"";"";"";"";"";"";
"11";"22.1k";"RR0201";"R0201";"R154, R155, R156, R157, R158, R159, R160, R161, R162, R163, R164";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"R";"";"";
"13";"22R";"RR0201";"R0201";"R23, R24, R25, R26, R27, R28, R29, R30, R49, R51, R62, R63, R64";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"R";"";"";
"2";"22pF";"CC0201";"C0201";"C308, C309";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"5";"22µF";"C-EUC1206";"C1206";"C283, C311, C315, C322, C329";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"54";"";"";"";"";"";"C";"";"";
"2";"24R";"R-EU_R0402";"R0402";"R1, R13";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"";"";"";"";"R";"";"";
"2";"25R";"RR0201";"R0201";"R165, R166";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"R";"";"";
"4";"25pF";"CC0201";"C0201";"C64, C65, C268, C270";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"1";"3.3uF";"CC0201";"C0201";"C191";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"2";"32.8pF";"CC0201";"C0201";"C59, C127";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"1";"3k2";"RR0201";"R0201";"R33";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"R";"";"";
"2";"4.3k";"R-EU_R0201";"R0201";"R15, R32";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"";"";"";"";"R";"";"";
"2";"4.3pF";"CC0201";"C0201";"C20, C21";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"27";"4.7k";"RR0201";"R0201";"R42, R44, R45, R46, R47, R48, R50, R52, R53, R54, R65, R66, R67, R68, R69, R70, R71, R72, R73, R74, R75, R76, R77, R117, R141, R142, R143";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"R";"";"";
"16";"4.7nF";"CC0201";"C0201";"C261, C263, C265, C267, C269, C271, C273, C275, C280, C282, C284, C286, C288, C290, C292, C294";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"8";"4.7uF";"CC0201";"C0201";"C108, C109, C153, C154, C177, C178, C287, C289";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"2";"4.7uF 35V";"4.7UF-POLAR-EIA3528-35V-10%(TANT)";"EIA3528";"C186, C187";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"CAP-13916";"";"";"";"";"";"4.7uF 35V";
"1";"47nF";"CC0201";"C0201";"C31";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"4";"47uF";"CC0201";"C0201";"C17, C55, C176, C285";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"4";"500R";"RR0201";"R0201";"R110, R112, R113, R114";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"R";"";"";
"3";"50R";"RR0201";"R0201";"R31, R115, R116";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"R";"";"";
"4";"50nH";"LL0201";"L0201";"L9, L10, L24, L28";"INDUCTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"L";"";"";
"1";"56R";"R-EU_R0201";"R0201";"R22";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"";"";"";"";"R";"";"";
"3";"5R";"RR0201";"R0201";"R132, R150, R152";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"R";"";"";
"2";"7.8pF";"CC0201";"C0201";"C61, C62";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"C";"";"";
"1";"830R";"R-EU_R0402";"R0402";"R36";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"";"";"";"";"R";"";"";
"4";"840R";"RR0201";"R0201";"R78, R79, R80, R81";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"NONE";"R";"";"";
"2";"AD8352ACPZ-R7";"AD8352ACPZ-R7";"CP_16_3_ADI";"U4, U8";"";"";"";"Copyright (C) 2025 Ultra Librarian. All rights reserved.";"https://www.analog.com/media/en/technical-documentation/data-sheets/ad8352.pdf";"2 GHz Ultralow Distortion Differential RF/IF Amplifier";"";"Analog Devices Inc";"AD8352ACPZ-R7";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"1";"AD9484BCPZ-500";"AD9484BCPZ-500";"CP_56_5_ADI";"U1";"";"";"";"Copyright (C) 2025 Ultra Librarian. All rights reserved.";"https://www.analog.com/media/en/technical-documentation/data-sheets/AD9484.pdf";"8-Bit, 500 MSPS, 1.8 V Analog-to-Digital Converter";"";"Analog Devices Inc";"AD9484BCPZ-500";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"1";"AD9708AR";"AD9708AR";"RW_28_ADI";"U3";"";"";"";"Copyright (C) 2024 Ultra Librarian. All rights reserved.";"";"";"";"";"AD9708AR";"";"Analog Devices Inc";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"4";"ADAR1000ACCZN";"ADAR1000ACCZN";"CC-88-1_ADI";"ADAR1_, ADAR2_, ADAR3_, ADAR4_";"";"";"";"Copyright (C) 2024 Ultra Librarian. All rights reserved.";"";"";"";"";"ADAR1000ACCZN";"";"Analog Devices Inc";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"RF";"";
"3";"ADS7830IPWR";"ADS7830IPWR";"PW16";"U10, U88, U89";"";"";"";"Copyright (C) 2025 Ultra Librarian. All rights reserved.";"https://www.ti.com/lit/gpn/ads7830";"8-Bit, 8-Channel Sampling A/D Converter with I2C Interface 16-TSSOP -40 to 85";"";"Texas Instruments";"ADS7830IPWR";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"16";"ADTR1107ACCZ";"ADTR1107ACCZ";"CC-24-8_ADI";"ADTR1107_1, ADTR1107_2, ADTR1107_3, ADTR1107_4, ADTR1107_5, ADTR1107_6, ADTR1107_7, ADTR1107_8, ADTR1107_9, ADTR1107_10, ADTR1107_11, ADTR1107_12, ADTR1107_13, ADTR1107_14, ADTR1107_15, ADTR1107_16";"";"";"";"Copyright (C) 2024 Ultra Librarian. All rights reserved.";"";"";"";"";"ADTR1107ACCZ";"";"Analog Devices Inc";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"RF";"";
"1";"AT93C46A-10SQ-2.7";"AT93C46A-10SQ-2.7";"SOIC8";"IC1";"Three-wire Automotive Temperature Serial EEPROM 1K (64 x 16)";"";"";"";"";"";"";"";"";"";"";"";"";"";"AT93C46DN-SH-B";"1455086";"58M3879";"";"0";"";"";"";"";"";"";"";"";
"5";"BLM15HB121SN1";"BLM15HB121SN1";"0402";"L5, L6, L7, L19, L20";"EMIFIL (R) Chip Ferrite Bead for GHz Noise";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"";"";"";"";"";"";"";
"2";"BPF2";"BPF2";"BPF2";"U$2, U$3";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"4";"Blue";"LED-BLUE0603";"LED-0603";"D2, D3, D4, D5";"Blue SMD LED";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"DIO-08575";"";"";"";"";"";"Blue";
"2";"CJT-T-P-HH-ST-TH1";"CJT-T-P-HH-ST-TH1";"CJTTPHHSTTH1";"J19, J21";"Conn Twinax F 0Hz to 4GHz 100Ohm Solder ST Thru-Hole Gold";"";"";"";"";"Conn Twinax F 0Hz to 4GHz 100Ohm Solder ST Thru-Hole Gold";"7.31mm";"SAMTEC";"CJT-T-P-HH-ST-TH1";"";"";"200-CJTTPHHSTTH1";"https://www.mouser.co.uk/ProductDetail/Samtec/CJT-T-P-HH-ST-TH1?qs=PB6%2FjmICvI3dfW8RDpxn0g%3D%3D";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"2";"DAC5578SRGET";"DAC5578SRGET";"RGE24_2P7X2P7";"U7, U69";"";"";"";"Copyright (C) 2025 Ultra Librarian. All rights reserved.";"https://www.ti.com/lit/gpn/dac5578";"8-bit, Octal Channel, Ultra-Low Glitch, Voltage Output, 2-Wire Interface DAC 24-VQFN -40 to 125";"";"Texas Instruments";"DAC5578SRGET";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"1";"ECS-120-10-36B2-JTN-TR";"CRYSTAL-12MHZ";"CRYSTAL-SMD-2X2.5MM";"Y1";"12.0MHz Crystal";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"XTAL-15540";"";"";"";"";"";"";
"1";"EP4RKU+";"EP4RKU+";"DG1677-2_MNC";"U16";"";"";"";"Copyright (C) 2024 Ultra Librarian. All rights reserved.";"";"";"";"";"EP4RKU+";"";"Mini Circuits";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"1";"FT2232HQ";"FT2232HQ";"64QFN_FT2232HQ_FTD";"U6";"";"";"";"Copyright (C) 2025 Ultra Librarian. All rights reserved.";"";"";"";"";"FT2232HQ";"";"FTDI, Future Technology Devices International Ltd";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"16";"INA241A3IDGKRDGK0008A-MFG";"INA241A3IDGKRDGK0008A-MFG";"DGK0008A-MFG";"U11, U73, U74, U75, U76, U77, U78, U79, U80, U81, U82, U83, U84, U85, U86, U87";"";"";"";"Copyright (C) 2025 Ultra Librarian. All rights reserved.";"";"-5-V to 110-V bidirectional ultraprecise current sense amplifier with enhanced PWM rejection 8-VSSOP -40 to 125";"";"Texas Instruments";"INA241A3IDGKR";"";"";"";"";"";"";"";"";"";"";"";"";"RefDes";"";"";"";"TYPE";"";
"2";"LTC5552IUDBTRMPBF";"LTC5552IUDBTRMPBF";"UDB_12_ADI";"U5, U13";"";"";"";"Copyright (C) 2024 Ultra Librarian. All rights reserved.";"";"";"";"";"LTC5552IUDB#TRMPBF";"";"Analog Devices Inc";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"17";"M3SWA2-34DR+";"M3SWA2-34DR+";"16_QFN";"RF_SW_1, RF_SW_2, RF_SW_3, RF_SW_4, RF_SW_5, RF_SW_6, RF_SW_7, RF_SW_8, RF_SW_9, RF_SW_10, RF_SW_11, RF_SW_12, RF_SW_13, RF_SW_14, RF_SW_15, RF_SW_16, U$1";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"2";"MINI-USB-32005-201";"MINI-USB-32005-201";"32005-201";"X2, X53";"MINI USB-B Conector";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"unknown";"unknown";"";"5";"";"";"";"";"";"";"";"";
"1";"MOMENTARY-SWITCH-SPST-SMD-4.6X2.8MM";"MOMENTARY-SWITCH-SPST-SMD-4.6X2.8MM";"TACTILE_SWITCH_SMD_4.6X2.8MM";"S1";"Momentary Switch (Pushbutton) - SPST";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"SWCH-15606";"";"";"";"";"";"";
"1";"MT25QL01GBBB8E12-0AUT";"MT25QL01GBBB8E12-0AUT";"BGA24_MT25QL_MRN";"U9";"";"";"";"Copyright (C) 2024 Ultra Librarian. All rights reserved.";"";"";"";"";"MT25QL01GBBB8E12-0AUT";"";"Micron";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"1";"NX3215SA-32.768KHz";"NX3225GD-8MHZ-STD-CRA-3";"XTAL_NX3225GD-8MHZ-STD-CRA-3_N";"XTAL3";"";"";"";"Copyright (C) 2024 Ultra Librarian. All rights reserved.";"";"";"";"";"NX3225GD-8MHZ-STD-CRA-3";"";"NDK";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"1";"NX3225GD-8MHZ-STD-CRA-3";"NX3225GD-8MHZ-STD-CRA-3";"XTAL_NX3225GD-8MHZ-STD-CRA-3_N";"XTAL1";"";"";"";"Copyright (C) 2024 Ultra Librarian. All rights reserved.";"";"";"";"";"NX3225GD-8MHZ-STD-CRA-3";"";"NDK";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"4";"OPA4703EA/250";"OPA4703EA/250";"PW14";"OPA_1, OPA_2, OPA_3, OPA_4";"";"";"";"Copyright (C) 2025 Ultra Librarian. All rights reserved.";"https://www.ti.com/lit/gpn/opa4703";"Quad, 12-V, 1-MHz, low-offset operational amplifier 14-TSSOP -40 to 85";"";"Texas Instruments";"OPA4703EA/250";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"1";"STM32F746ZGT7";"STM32F746ZGT7";"LQFP-144_STM";"U2";"";"";"";"Copyright (C) 2024 Ultra Librarian. All rights reserved.";"";"";"";"";"STM32F746ZGT7";"";"STMicroelectronics";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"34";"SZMMSZ5232BT1G";"SZMMSZ5232BT1G";"SOD-123_ONS";"U14, U15, U17, U37, U38, U39, U40, U41, U43, U44, U45, U46, U47, U48, U49, U50, U51, U52, U53, U54, U55, U56, U57, U58, U59, U60, U61, U62, U63, U64, U65, U66, U67, U68";"";"";"";"Copyright (C) 2024 Ultra Librarian. All rights reserved.";"";"";"";"";"SZMMSZ5232BT1G";"";"onsemi";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"1";"XC7A50T-2FTG256I";"XC7A50T-2FTG256I";"BGA256C100P16X16_1700X1700X155";"U42";"Artix-7 Field Programmable Gate Array (FPGA) IC 170 2764800 52160 256-LBGA Check availability";"In Stock";"https://www.snapeda.com/parts/XC7A50T-2FTG256I/Xilinx/view-part/?ref=eda";"";"";" Artix-7 Field Programmable Gate Array (FPGA) IC 170 2764800 52160 256-LBGA ";"";"";"";"Xilinx Inc.";"";"";"";"XC7A50T-2FTG256I";"";"";"";"LBGA-256 Xilinx Inc.";"";"None";"";"";"https://www.snapeda.com/parts/XC7A50T-2FTG256I/Xilinx/view-part/?ref=snap";"";"";"";"";
Can't render this file because it contains an unexpected character in line 51 and column 251.
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/RADAR_Main_Board.drd
+867 -521
View File
File diff suppressed because it is too large Load Diff
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/RADAR_Main_Board.dri
+6 -6
View File
@@ -1,8 +1,8 @@
Generated by EAGLE CAM Processor 7.4.0
Drill Station Info File: C:/Users/dell/Desktop/CrowdSupply/RADAR_V6/4_Schematics and Boards Layout/4_6_Schematics/MainBoard_Test/RADAR_Main_Board.dri
Drill Station Info File: C:/Users/dell/Desktop/CrowdSupply/RADAR_V6/4_Schematics and Boards Layout/4_6_Schematics/MainBoard_Prod_V2/RADAR_Main_Board.dri
Date : 06/04/2026 22:10
Date : 19/04/2026 23:21
Drills : generated
Device : Excellon drill station, coordinate format 2.5 inch
@@ -27,8 +27,8 @@ Drills used:
Code Size used
T01 0.0059inch 1609
T02 0.0079inch 1892
T01 0.0059inch 1604
T02 0.0079inch 2243
T03 0.0100inch 18
T04 0.0118inch 355
T05 0.0138inch 113
@@ -43,8 +43,8 @@ Drills used:
T14 0.0472inch 4
T15 0.1260inch 8
Total number of drills: 4438
Total number of drills: 4784
Plotfiles:
C:/Users/dell/Desktop/CrowdSupply/RADAR_V6/4_Schematics and Boards Layout/4_6_Schematics/MainBoard_Test/RADAR_Main_Board.drd
C:/Users/dell/Desktop/CrowdSupply/RADAR_V6/4_Schematics and Boards Layout/4_6_Schematics/MainBoard_Prod_V2/RADAR_Main_Board.drd
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/RADAR_Main_Board.gpi
+3 -3
View File
@@ -1,9 +1,9 @@
Generated by EAGLE CAM Processor 7.4.0
Photoplotter Info File: C:/Users/dell/Desktop/CrowdSupply/RADAR_V6/4_Schematics and Boards Layout/4_6_Schematics/MainBoard_Test/RADAR_Main_Board.gpi
Photoplotter Info File: C:/Users/dell/Desktop/CrowdSupply/RADAR_V6/4_Schematics and Boards Layout/4_6_Schematics/MainBoard_Prod_V2/RADAR_Main_Board.gpi
Date : 06/04/2026 22:41
Plotfile : C:/Users/dell/Desktop/CrowdSupply/RADAR_V6/4_Schematics and Boards Layout/4_6_Schematics/MainBoard_Test/RADAR_Main_Board.bsk
Date : 19/04/2026 23:50
Plotfile : C:/Users/dell/Desktop/CrowdSupply/RADAR_V6/4_Schematics and Boards Layout/4_6_Schematics/MainBoard_Prod_V2/RADAR_Main_Board.bsk
Apertures : generated:
Device : Gerber RS-274-X photoplotter, coordinate format 2.5 inch
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/RADAR_Main_Board.slk
+13265 -9902
View File
File diff suppressed because it is too large Load Diff
4_Schematics and Boards Layout/4_7_Production Files/Gerber_Main_Board/RADAR_Main_Board.smt
+6728 -3421
View File
File diff suppressed because it is too large Load Diff
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PA/BOM_PA.xlsx
BIN
View File
Binary file not shown.
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PA/RF_PA.L1
+79 -54
View File
@@ -23333,60 +23333,90 @@ X0056315Y0057299D03*
X0056315Y0054937D03*
X0056315Y0052772D03*
X0056315Y0050606D03*
X0057102Y0045291D03*
X0057102Y0043126D03*
X0057102Y0040961D03*
X0057102Y0038992D03*
X0057102Y0037024D03*
X0057102Y0035055D03*
X0059071Y0035055D03*
X0061039Y0035055D03*
X0061039Y0037024D03*
X0061039Y0038992D03*
X0059071Y0038992D03*
X0059071Y0037024D03*
X0059071Y0040961D03*
X0061039Y0040961D03*
X0063008Y0040961D03*
X0063008Y0038992D03*
X0063008Y0037024D03*
X0063008Y0035055D03*
X0064976Y0035055D03*
X0064976Y0037024D03*
X0064976Y0038992D03*
X0064976Y0040961D03*
X0066945Y0040961D03*
X0068913Y0040961D03*
X0068913Y0038992D03*
X0066945Y0038992D03*
X0066945Y0037024D03*
X0068913Y0037024D03*
X0068913Y0035055D03*
X0066945Y0035055D03*
X0070882Y0035055D03*
X0072850Y0035055D03*
X0072850Y0037024D03*
X0070882Y0037024D03*
X0070882Y0038992D03*
X0072850Y0038992D03*
X0072850Y0040961D03*
X0070882Y0040961D03*
X0070882Y0043126D03*
X0072850Y0043126D03*
X0059477Y0051237D03*
X0059526Y0053881D03*
X0059526Y0056672D03*
X0059477Y0059365D03*
X0062171Y0059316D03*
X0062122Y0056672D03*
X0062219Y0053881D03*
X0062317Y0051188D03*
X0062268Y0048495D03*
X0065060Y0048446D03*
X0064913Y0051188D03*
X0064815Y0053930D03*
X0064913Y0056623D03*
X0064913Y0059365D03*
X0067655Y0056721D03*
X0067753Y0059365D03*
X0070251Y0059267D03*
X0070349Y0056721D03*
X0070251Y0053979D03*
X0067753Y0053881D03*
X0067704Y0051090D03*
X0067753Y0048544D03*
X0070300Y0048593D03*
X0070251Y0051041D03*
X0073835Y0050606D03*
X0073835Y0052772D03*
X0073835Y0055134D03*
X0073835Y0057496D03*
X0073835Y0059858D03*
X0072850Y0045291D03*
X0070882Y0045291D03*
X0068913Y0045291D03*
X0066945Y0045291D03*
X0064976Y0045291D03*
X0064976Y0043126D03*
X0066945Y0043126D03*
X0068913Y0043126D03*
X0063008Y0043126D03*
X0061039Y0043126D03*
X0059071Y0043126D03*
X0070882Y0043126D03*
X0072850Y0043126D03*
X0072850Y0040961D03*
X0070882Y0040961D03*
X0070882Y0038992D03*
X0070882Y0037024D03*
X0072850Y0037024D03*
X0072850Y0038992D03*
X0072850Y0035055D03*
X0070882Y0035055D03*
X0068913Y0035055D03*
X0066945Y0035055D03*
X0066945Y0037024D03*
X0066945Y0038992D03*
X0068913Y0038992D03*
X0068913Y0037024D03*
X0068913Y0040961D03*
X0066945Y0040961D03*
X0064976Y0040961D03*
X0064976Y0038992D03*
X0064976Y0037024D03*
X0064976Y0035055D03*
X0063008Y0035055D03*
X0063008Y0037024D03*
X0063008Y0038992D03*
X0063008Y0040961D03*
X0061039Y0040961D03*
X0059071Y0040961D03*
X0059071Y0038992D03*
X0061039Y0038992D03*
X0061039Y0037024D03*
X0059071Y0037024D03*
X0059071Y0035055D03*
X0061039Y0035055D03*
X0057102Y0035055D03*
X0057102Y0037024D03*
X0057102Y0038992D03*
X0057102Y0040961D03*
X0057102Y0043126D03*
X0057102Y0045291D03*
X0059071Y0045291D03*
X0061039Y0045291D03*
X0063008Y0045291D03*
X0063008Y0043126D03*
X0061039Y0043126D03*
X0059071Y0043126D03*
X0059428Y0048446D03*
X0064976Y0045291D03*
X0066945Y0045291D03*
X0068913Y0045291D03*
X0068913Y0043126D03*
X0066945Y0043126D03*
X0064976Y0043126D03*
X0054150Y0061630D03*
X0051787Y0061630D03*
X0048441Y0061630D03*
@@ -23405,11 +23435,6 @@ X0030724Y0041157D03*
X0033283Y0041157D03*
X0035646Y0041157D03*
X0038205Y0041157D03*
X0073835Y0050606D03*
X0073835Y0052772D03*
X0073835Y0055134D03*
X0073835Y0057496D03*
X0073835Y0059858D03*
X0074228Y0088402D03*
D32*
X0076000Y0051197D03*
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PA/RF_PA.L2
+121 -96
View File
@@ -3939,75 +3939,111 @@ X0073835Y0052772D03*
X0073835Y0055134D03*
X0073835Y0057496D03*
X0073835Y0059858D03*
X0066748Y0065764D03*
X0066748Y0068126D03*
X0066748Y0070685D03*
X0066748Y0073244D03*
X0066748Y0076197D03*
X0063992Y0076197D03*
X0063992Y0073244D03*
X0063992Y0070685D03*
X0063992Y0068126D03*
X0070251Y0059267D03*
X0067753Y0059365D03*
X0067655Y0056721D03*
X0064913Y0056623D03*
X0064815Y0053930D03*
X0064913Y0051188D03*
X0065060Y0048446D03*
X0067753Y0048544D03*
X0067704Y0051090D03*
X0070251Y0051041D03*
X0070300Y0048593D03*
X0070882Y0045291D03*
X0072850Y0045291D03*
X0072850Y0043126D03*
X0070882Y0043126D03*
X0070882Y0040961D03*
X0072850Y0040961D03*
X0072850Y0038992D03*
X0070882Y0038992D03*
X0070882Y0037024D03*
X0072850Y0037024D03*
X0072850Y0035055D03*
X0070882Y0035055D03*
X0068913Y0035055D03*
X0066945Y0035055D03*
X0066945Y0037024D03*
X0066945Y0038992D03*
X0068913Y0038992D03*
X0068913Y0037024D03*
X0068913Y0040961D03*
X0066945Y0040961D03*
X0064976Y0040961D03*
X0064976Y0038992D03*
X0064976Y0037024D03*
X0064976Y0035055D03*
X0063008Y0035055D03*
X0063008Y0037024D03*
X0063008Y0038992D03*
X0063008Y0040961D03*
X0061039Y0040961D03*
X0059071Y0040961D03*
X0059071Y0038992D03*
X0061039Y0038992D03*
X0061039Y0037024D03*
X0059071Y0037024D03*
X0059071Y0035055D03*
X0061039Y0035055D03*
X0057102Y0035055D03*
X0057102Y0037024D03*
X0057102Y0038992D03*
X0057102Y0040961D03*
X0057102Y0043126D03*
X0057102Y0045291D03*
X0059071Y0045291D03*
X0061039Y0045291D03*
X0063008Y0045291D03*
X0063008Y0043126D03*
X0061039Y0043126D03*
X0059071Y0043126D03*
X0059428Y0048446D03*
X0059477Y0051237D03*
X0059526Y0053881D03*
X0059526Y0056672D03*
X0059477Y0059365D03*
X0062171Y0059316D03*
X0062122Y0056672D03*
X0062219Y0053881D03*
X0062317Y0051188D03*
X0062268Y0048495D03*
X0064976Y0045291D03*
X0066945Y0045291D03*
X0068913Y0045291D03*
X0068913Y0043126D03*
X0066945Y0043126D03*
X0064976Y0043126D03*
X0067753Y0053881D03*
X0070251Y0053979D03*
X0070349Y0056721D03*
X0064913Y0059365D03*
X0063992Y0065764D03*
X0063992Y0068126D03*
X0063992Y0070685D03*
X0063992Y0073244D03*
X0063992Y0076197D03*
X0066748Y0076197D03*
X0066748Y0073244D03*
X0066748Y0070685D03*
X0066748Y0068126D03*
X0066748Y0065764D03*
X0066551Y0079937D03*
X0066551Y0083087D03*
X0067535Y0085843D03*
X0064583Y0086433D03*
X0063795Y0083283D03*
X0063992Y0079937D03*
X0069307Y0082693D03*
X0071276Y0085449D03*
X0070094Y0088598D03*
X0066748Y0088992D03*
X0074228Y0088402D03*
X0056315Y0059661D03*
X0056315Y0057299D03*
X0056315Y0054937D03*
X0056315Y0052772D03*
X0056315Y0050606D03*
X0057102Y0045291D03*
X0057102Y0043126D03*
X0057102Y0040961D03*
X0057102Y0038992D03*
X0057102Y0037024D03*
X0057102Y0035055D03*
X0059071Y0035055D03*
X0061039Y0035055D03*
X0061039Y0037024D03*
X0061039Y0038992D03*
X0059071Y0038992D03*
X0059071Y0037024D03*
X0059071Y0040961D03*
X0061039Y0040961D03*
X0063008Y0040961D03*
X0063008Y0038992D03*
X0063008Y0037024D03*
X0063008Y0035055D03*
X0064976Y0035055D03*
X0064976Y0037024D03*
X0064976Y0038992D03*
X0064976Y0040961D03*
X0066945Y0040961D03*
X0068913Y0040961D03*
X0068913Y0038992D03*
X0066945Y0038992D03*
X0066945Y0037024D03*
X0068913Y0037024D03*
X0068913Y0035055D03*
X0066945Y0035055D03*
X0070882Y0035055D03*
X0072850Y0035055D03*
X0072850Y0037024D03*
X0070882Y0037024D03*
X0070882Y0038992D03*
X0072850Y0038992D03*
X0072850Y0040961D03*
X0070882Y0040961D03*
X0070882Y0043126D03*
X0072850Y0043126D03*
X0072850Y0045291D03*
X0070882Y0045291D03*
X0068913Y0045291D03*
X0066945Y0045291D03*
X0064976Y0045291D03*
X0064976Y0043126D03*
X0066945Y0043126D03*
X0068913Y0043126D03*
X0063008Y0043126D03*
X0061039Y0043126D03*
X0059071Y0043126D03*
X0059071Y0045291D03*
X0061039Y0045291D03*
X0063008Y0045291D03*
X0054150Y0061630D03*
X0051787Y0061630D03*
X0048441Y0061630D03*
@@ -4026,40 +4062,29 @@ X0030724Y0041157D03*
X0033283Y0041157D03*
X0035646Y0041157D03*
X0038205Y0041157D03*
X0063992Y0079937D03*
X0063795Y0083283D03*
X0066551Y0083087D03*
X0067535Y0085843D03*
X0064583Y0086433D03*
X0066748Y0088992D03*
X0070094Y0088598D03*
X0071276Y0085449D03*
X0069307Y0082693D03*
X0066551Y0079937D03*
X0074228Y0088402D03*
D16*
X0076000Y0051197D03*
X0079937Y0051197D03*
X0083874Y0051197D03*
X0087811Y0051197D03*
X0091748Y0051197D03*
X0095685Y0051197D03*
X0095685Y0044685D03*
X0091748Y0045276D03*
X0087811Y0045276D03*
X0083874Y0045276D03*
X0079937Y0045276D03*
X0076000Y0045276D03*
X0054150Y0045079D03*
X0050213Y0045079D03*
X0046276Y0045079D03*
X0042339Y0045079D03*
X0038402Y0045079D03*
X0034465Y0045079D03*
X0034465Y0051000D03*
X0038402Y0051000D03*
X0042339Y0051000D03*
X0046276Y0051000D03*
X0050213Y0051000D03*
X0042339Y0045079D03*
X0046276Y0045079D03*
X0050213Y0045079D03*
X0054150Y0045079D03*
X0054150Y0051000D03*
X0050213Y0051000D03*
X0046276Y0051000D03*
X0042339Y0051000D03*
X0038402Y0051000D03*
X0034465Y0051000D03*
X0034465Y0045079D03*
X0076000Y0045276D03*
X0079937Y0045276D03*
X0083874Y0045276D03*
X0087811Y0045276D03*
X0091748Y0045276D03*
X0095685Y0044685D03*
X0095685Y0051197D03*
X0091748Y0051197D03*
X0087811Y0051197D03*
X0083874Y0051197D03*
X0079937Y0051197D03*
X0076000Y0051197D03*
M02*
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PA/RF_PA.L3
+121 -96
View File
@@ -3939,75 +3939,111 @@ X0073835Y0052772D03*
X0073835Y0055134D03*
X0073835Y0057496D03*
X0073835Y0059858D03*
X0066748Y0065764D03*
X0066748Y0068126D03*
X0066748Y0070685D03*
X0066748Y0073244D03*
X0066748Y0076197D03*
X0063992Y0076197D03*
X0063992Y0073244D03*
X0063992Y0070685D03*
X0063992Y0068126D03*
X0070251Y0059267D03*
X0067753Y0059365D03*
X0067655Y0056721D03*
X0064913Y0056623D03*
X0064815Y0053930D03*
X0064913Y0051188D03*
X0065060Y0048446D03*
X0067753Y0048544D03*
X0067704Y0051090D03*
X0070251Y0051041D03*
X0070300Y0048593D03*
X0070882Y0045291D03*
X0072850Y0045291D03*
X0072850Y0043126D03*
X0070882Y0043126D03*
X0070882Y0040961D03*
X0072850Y0040961D03*
X0072850Y0038992D03*
X0070882Y0038992D03*
X0070882Y0037024D03*
X0072850Y0037024D03*
X0072850Y0035055D03*
X0070882Y0035055D03*
X0068913Y0035055D03*
X0066945Y0035055D03*
X0066945Y0037024D03*
X0066945Y0038992D03*
X0068913Y0038992D03*
X0068913Y0037024D03*
X0068913Y0040961D03*
X0066945Y0040961D03*
X0064976Y0040961D03*
X0064976Y0038992D03*
X0064976Y0037024D03*
X0064976Y0035055D03*
X0063008Y0035055D03*
X0063008Y0037024D03*
X0063008Y0038992D03*
X0063008Y0040961D03*
X0061039Y0040961D03*
X0059071Y0040961D03*
X0059071Y0038992D03*
X0061039Y0038992D03*
X0061039Y0037024D03*
X0059071Y0037024D03*
X0059071Y0035055D03*
X0061039Y0035055D03*
X0057102Y0035055D03*
X0057102Y0037024D03*
X0057102Y0038992D03*
X0057102Y0040961D03*
X0057102Y0043126D03*
X0057102Y0045291D03*
X0059071Y0045291D03*
X0061039Y0045291D03*
X0063008Y0045291D03*
X0063008Y0043126D03*
X0061039Y0043126D03*
X0059071Y0043126D03*
X0059428Y0048446D03*
X0059477Y0051237D03*
X0059526Y0053881D03*
X0059526Y0056672D03*
X0059477Y0059365D03*
X0062171Y0059316D03*
X0062122Y0056672D03*
X0062219Y0053881D03*
X0062317Y0051188D03*
X0062268Y0048495D03*
X0064976Y0045291D03*
X0066945Y0045291D03*
X0068913Y0045291D03*
X0068913Y0043126D03*
X0066945Y0043126D03*
X0064976Y0043126D03*
X0067753Y0053881D03*
X0070251Y0053979D03*
X0070349Y0056721D03*
X0064913Y0059365D03*
X0063992Y0065764D03*
X0063992Y0068126D03*
X0063992Y0070685D03*
X0063992Y0073244D03*
X0063992Y0076197D03*
X0066748Y0076197D03*
X0066748Y0073244D03*
X0066748Y0070685D03*
X0066748Y0068126D03*
X0066748Y0065764D03*
X0066551Y0079937D03*
X0066551Y0083087D03*
X0067535Y0085843D03*
X0064583Y0086433D03*
X0063795Y0083283D03*
X0063992Y0079937D03*
X0069307Y0082693D03*
X0071276Y0085449D03*
X0070094Y0088598D03*
X0066748Y0088992D03*
X0074228Y0088402D03*
X0056315Y0059661D03*
X0056315Y0057299D03*
X0056315Y0054937D03*
X0056315Y0052772D03*
X0056315Y0050606D03*
X0057102Y0045291D03*
X0057102Y0043126D03*
X0057102Y0040961D03*
X0057102Y0038992D03*
X0057102Y0037024D03*
X0057102Y0035055D03*
X0059071Y0035055D03*
X0061039Y0035055D03*
X0061039Y0037024D03*
X0061039Y0038992D03*
X0059071Y0038992D03*
X0059071Y0037024D03*
X0059071Y0040961D03*
X0061039Y0040961D03*
X0063008Y0040961D03*
X0063008Y0038992D03*
X0063008Y0037024D03*
X0063008Y0035055D03*
X0064976Y0035055D03*
X0064976Y0037024D03*
X0064976Y0038992D03*
X0064976Y0040961D03*
X0066945Y0040961D03*
X0068913Y0040961D03*
X0068913Y0038992D03*
X0066945Y0038992D03*
X0066945Y0037024D03*
X0068913Y0037024D03*
X0068913Y0035055D03*
X0066945Y0035055D03*
X0070882Y0035055D03*
X0072850Y0035055D03*
X0072850Y0037024D03*
X0070882Y0037024D03*
X0070882Y0038992D03*
X0072850Y0038992D03*
X0072850Y0040961D03*
X0070882Y0040961D03*
X0070882Y0043126D03*
X0072850Y0043126D03*
X0072850Y0045291D03*
X0070882Y0045291D03*
X0068913Y0045291D03*
X0066945Y0045291D03*
X0064976Y0045291D03*
X0064976Y0043126D03*
X0066945Y0043126D03*
X0068913Y0043126D03*
X0063008Y0043126D03*
X0061039Y0043126D03*
X0059071Y0043126D03*
X0059071Y0045291D03*
X0061039Y0045291D03*
X0063008Y0045291D03*
X0054150Y0061630D03*
X0051787Y0061630D03*
X0048441Y0061630D03*
@@ -4026,40 +4062,29 @@ X0030724Y0041157D03*
X0033283Y0041157D03*
X0035646Y0041157D03*
X0038205Y0041157D03*
X0063992Y0079937D03*
X0063795Y0083283D03*
X0066551Y0083087D03*
X0067535Y0085843D03*
X0064583Y0086433D03*
X0066748Y0088992D03*
X0070094Y0088598D03*
X0071276Y0085449D03*
X0069307Y0082693D03*
X0066551Y0079937D03*
X0074228Y0088402D03*
D16*
X0076000Y0051197D03*
X0079937Y0051197D03*
X0083874Y0051197D03*
X0087811Y0051197D03*
X0091748Y0051197D03*
X0095685Y0051197D03*
X0095685Y0044685D03*
X0091748Y0045276D03*
X0087811Y0045276D03*
X0083874Y0045276D03*
X0079937Y0045276D03*
X0076000Y0045276D03*
X0054150Y0045079D03*
X0050213Y0045079D03*
X0046276Y0045079D03*
X0042339Y0045079D03*
X0038402Y0045079D03*
X0034465Y0045079D03*
X0034465Y0051000D03*
X0038402Y0051000D03*
X0042339Y0051000D03*
X0046276Y0051000D03*
X0050213Y0051000D03*
X0042339Y0045079D03*
X0046276Y0045079D03*
X0050213Y0045079D03*
X0054150Y0045079D03*
X0054150Y0051000D03*
X0050213Y0051000D03*
X0046276Y0051000D03*
X0042339Y0051000D03*
X0038402Y0051000D03*
X0034465Y0051000D03*
X0034465Y0045079D03*
X0076000Y0045276D03*
X0079937Y0045276D03*
X0083874Y0045276D03*
X0087811Y0045276D03*
X0091748Y0045276D03*
X0095685Y0044685D03*
X0095685Y0051197D03*
X0091748Y0051197D03*
X0087811Y0051197D03*
X0083874Y0051197D03*
X0079937Y0051197D03*
X0076000Y0051197D03*
M02*
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PA/RF_PA.L4
+121 -96
View File
@@ -4066,75 +4066,111 @@ X0073835Y0052772D03*
X0073835Y0055134D03*
X0073835Y0057496D03*
X0073835Y0059858D03*
X0066748Y0065764D03*
X0066748Y0068126D03*
X0066748Y0070685D03*
X0066748Y0073244D03*
X0066748Y0076197D03*
X0063992Y0076197D03*
X0063992Y0073244D03*
X0063992Y0070685D03*
X0063992Y0068126D03*
X0070251Y0059267D03*
X0067753Y0059365D03*
X0067655Y0056721D03*
X0064913Y0056623D03*
X0064815Y0053930D03*
X0064913Y0051188D03*
X0065060Y0048446D03*
X0067753Y0048544D03*
X0067704Y0051090D03*
X0070251Y0051041D03*
X0070300Y0048593D03*
X0070882Y0045291D03*
X0072850Y0045291D03*
X0072850Y0043126D03*
X0070882Y0043126D03*
X0070882Y0040961D03*
X0072850Y0040961D03*
X0072850Y0038992D03*
X0070882Y0038992D03*
X0070882Y0037024D03*
X0072850Y0037024D03*
X0072850Y0035055D03*
X0070882Y0035055D03*
X0068913Y0035055D03*
X0066945Y0035055D03*
X0066945Y0037024D03*
X0066945Y0038992D03*
X0068913Y0038992D03*
X0068913Y0037024D03*
X0068913Y0040961D03*
X0066945Y0040961D03*
X0064976Y0040961D03*
X0064976Y0038992D03*
X0064976Y0037024D03*
X0064976Y0035055D03*
X0063008Y0035055D03*
X0063008Y0037024D03*
X0063008Y0038992D03*
X0063008Y0040961D03*
X0061039Y0040961D03*
X0059071Y0040961D03*
X0059071Y0038992D03*
X0061039Y0038992D03*
X0061039Y0037024D03*
X0059071Y0037024D03*
X0059071Y0035055D03*
X0061039Y0035055D03*
X0057102Y0035055D03*
X0057102Y0037024D03*
X0057102Y0038992D03*
X0057102Y0040961D03*
X0057102Y0043126D03*
X0057102Y0045291D03*
X0059071Y0045291D03*
X0061039Y0045291D03*
X0063008Y0045291D03*
X0063008Y0043126D03*
X0061039Y0043126D03*
X0059071Y0043126D03*
X0059428Y0048446D03*
X0059477Y0051237D03*
X0059526Y0053881D03*
X0059526Y0056672D03*
X0059477Y0059365D03*
X0062171Y0059316D03*
X0062122Y0056672D03*
X0062219Y0053881D03*
X0062317Y0051188D03*
X0062268Y0048495D03*
X0064976Y0045291D03*
X0066945Y0045291D03*
X0068913Y0045291D03*
X0068913Y0043126D03*
X0066945Y0043126D03*
X0064976Y0043126D03*
X0067753Y0053881D03*
X0070251Y0053979D03*
X0070349Y0056721D03*
X0064913Y0059365D03*
X0063992Y0065764D03*
X0063992Y0068126D03*
X0063992Y0070685D03*
X0063992Y0073244D03*
X0063992Y0076197D03*
X0066748Y0076197D03*
X0066748Y0073244D03*
X0066748Y0070685D03*
X0066748Y0068126D03*
X0066748Y0065764D03*
X0066551Y0079937D03*
X0066551Y0083087D03*
X0067535Y0085843D03*
X0064583Y0086433D03*
X0063795Y0083283D03*
X0063992Y0079937D03*
X0069307Y0082693D03*
X0071276Y0085449D03*
X0070094Y0088598D03*
X0066748Y0088992D03*
X0074228Y0088402D03*
X0056315Y0059661D03*
X0056315Y0057299D03*
X0056315Y0054937D03*
X0056315Y0052772D03*
X0056315Y0050606D03*
X0057102Y0045291D03*
X0057102Y0043126D03*
X0057102Y0040961D03*
X0057102Y0038992D03*
X0057102Y0037024D03*
X0057102Y0035055D03*
X0059071Y0035055D03*
X0061039Y0035055D03*
X0061039Y0037024D03*
X0061039Y0038992D03*
X0059071Y0038992D03*
X0059071Y0037024D03*
X0059071Y0040961D03*
X0061039Y0040961D03*
X0063008Y0040961D03*
X0063008Y0038992D03*
X0063008Y0037024D03*
X0063008Y0035055D03*
X0064976Y0035055D03*
X0064976Y0037024D03*
X0064976Y0038992D03*
X0064976Y0040961D03*
X0066945Y0040961D03*
X0068913Y0040961D03*
X0068913Y0038992D03*
X0066945Y0038992D03*
X0066945Y0037024D03*
X0068913Y0037024D03*
X0068913Y0035055D03*
X0066945Y0035055D03*
X0070882Y0035055D03*
X0072850Y0035055D03*
X0072850Y0037024D03*
X0070882Y0037024D03*
X0070882Y0038992D03*
X0072850Y0038992D03*
X0072850Y0040961D03*
X0070882Y0040961D03*
X0070882Y0043126D03*
X0072850Y0043126D03*
X0072850Y0045291D03*
X0070882Y0045291D03*
X0068913Y0045291D03*
X0066945Y0045291D03*
X0064976Y0045291D03*
X0064976Y0043126D03*
X0066945Y0043126D03*
X0068913Y0043126D03*
X0063008Y0043126D03*
X0061039Y0043126D03*
X0059071Y0043126D03*
X0059071Y0045291D03*
X0061039Y0045291D03*
X0063008Y0045291D03*
X0054150Y0061630D03*
X0051787Y0061630D03*
X0048441Y0061630D03*
@@ -4153,40 +4189,29 @@ X0030724Y0041157D03*
X0033283Y0041157D03*
X0035646Y0041157D03*
X0038205Y0041157D03*
X0063992Y0079937D03*
X0063795Y0083283D03*
X0066551Y0083087D03*
X0067535Y0085843D03*
X0064583Y0086433D03*
X0066748Y0088992D03*
X0070094Y0088598D03*
X0071276Y0085449D03*
X0069307Y0082693D03*
X0066551Y0079937D03*
X0074228Y0088402D03*
D16*
X0076000Y0051197D03*
X0079937Y0051197D03*
X0083874Y0051197D03*
X0087811Y0051197D03*
X0091748Y0051197D03*
X0095685Y0051197D03*
X0095685Y0044685D03*
X0091748Y0045276D03*
X0087811Y0045276D03*
X0083874Y0045276D03*
X0079937Y0045276D03*
X0076000Y0045276D03*
X0054150Y0045079D03*
X0050213Y0045079D03*
X0046276Y0045079D03*
X0042339Y0045079D03*
X0038402Y0045079D03*
X0034465Y0045079D03*
X0034465Y0051000D03*
X0038402Y0051000D03*
X0042339Y0051000D03*
X0046276Y0051000D03*
X0050213Y0051000D03*
X0042339Y0045079D03*
X0046276Y0045079D03*
X0050213Y0045079D03*
X0054150Y0045079D03*
X0054150Y0051000D03*
X0050213Y0051000D03*
X0046276Y0051000D03*
X0042339Y0051000D03*
X0038402Y0051000D03*
X0034465Y0051000D03*
X0034465Y0045079D03*
X0076000Y0045276D03*
X0079937Y0045276D03*
X0083874Y0045276D03*
X0087811Y0045276D03*
X0091748Y0045276D03*
X0095685Y0044685D03*
X0095685Y0051197D03*
X0091748Y0051197D03*
X0087811Y0051197D03*
X0083874Y0051197D03*
X0079937Y0051197D03*
X0076000Y0051197D03*
M02*
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PA/RF_PA.drd
+105 -80
View File
@@ -33,60 +33,30 @@ X56315Y57299
X56315Y54937
X56315Y52772
X56315Y50606
X57102Y45291
X57102Y43126
X57102Y40961
X57102Y38992
X57102Y37024
X57102Y35055
X59071Y35055
X61039Y35055
X61039Y37024
X61039Y38992
X59071Y38992
X59071Y37024
X59071Y40961
X61039Y40961
X63008Y40961
X63008Y38992
X63008Y37024
X63008Y35055
X64976Y35055
X64976Y37024
X64976Y38992
X64976Y40961
X66945Y40961
X68913Y40961
X68913Y38992
X66945Y38992
X66945Y37024
X68913Y37024
X68913Y35055
X66945Y35055
X70882Y35055
X72850Y35055
X72850Y37024
X70882Y37024
X70882Y38992
X72850Y38992
X72850Y40961
X70882Y40961
X70882Y43126
X72850Y43126
X72850Y45291
X70882Y45291
X68913Y45291
X66945Y45291
X64976Y45291
X64976Y43126
X66945Y43126
X68913Y43126
X63008Y43126
X61039Y43126
X59071Y43126
X59071Y45291
X61039Y45291
X63008Y45291
X59477Y51237
X59526Y53881
X59526Y56672
X59477Y59365
X62171Y59316
X62122Y56672
X62219Y53881
X62317Y51188
X62268Y48495
X65060Y48446
X64913Y51188
X64815Y53930
X64913Y56623
X64913Y59365
X67655Y56721
X67753Y59365
X70251Y59267
X70349Y56721
X70251Y53979
X67753Y53881
X67704Y51090
X67753Y48544
X70300Y48593
X70251Y51041
X73835Y50606
X73835Y52772
X73835Y55134
@@ -113,19 +83,62 @@ X71276Y85449
X69307Y82693
X66551Y79937
X74228Y88402
X59428Y48446
X59071Y45291
X61039Y45291
X63008Y45291
X63008Y43126
X61039Y43126
X59071Y43126
X59071Y40961
X61039Y40961
X61039Y38992
X59071Y38992
X59071Y37024
X61039Y37024
X63008Y37024
X63008Y38992
X63008Y40961
X64976Y40961
X64976Y38992
X64976Y37024
X64976Y35055
X66945Y35055
X68913Y35055
X68913Y37024
X68913Y38992
X66945Y38992
X66945Y37024
X66945Y40961
X68913Y40961
X68913Y43126
X66945Y43126
X64976Y43126
X64976Y45291
X66945Y45291
X68913Y45291
X70882Y45291
X72850Y45291
X72850Y43126
X70882Y43126
X70882Y40961
X72850Y40961
X72850Y38992
X70882Y38992
X70882Y37024
X72850Y37024
X72850Y35055
X70882Y35055
X63008Y35055
X61039Y35055
X59071Y35055
X57102Y35055
X57102Y37024
X57102Y38992
X57102Y40961
X57102Y43126
X57102Y45291
T02
X76000Y51197
X79937Y51197
X83874Y51197
X87811Y51197
X91748Y51197
X95685Y51197
X95685Y44685
X91748Y45276
X87811Y45276
X83874Y45276
X79937Y45276
X76000Y45276
X54150Y45079
X50213Y45079
X46276Y45079
@@ -138,24 +151,25 @@ X42339Y51000
X46276Y51000
X50213Y51000
X54150Y51000
X76000Y51197
X79937Y51197
X83874Y51197
X87811Y51197
X91748Y51197
X95685Y51197
X95685Y44685
X91748Y45276
X87811Y45276
X83874Y45276
X79937Y45276
X76000Y45276
T03
X50409Y39386
X49819Y33874
X50409Y26787
X55724Y29150
X59661Y25409
X63992Y30331
X66748Y24819
X70094Y30134
X72850Y26000
X76000Y30331
X78559Y24425
X78756Y38205
X80724Y41354
X80921Y33283
X82299Y27969
X84661Y24622
X85252Y31118
X80921Y33283
X78756Y38205
X80724Y41354
X91551Y31709
X91945Y27181
X97063Y28756
@@ -317,6 +331,17 @@ X8087Y52969
X40567Y25016
X43520Y28756
X42929Y31709
X49819Y33874
X50409Y39386
X55724Y29150
X59661Y25409
X63992Y30331
X66748Y24819
X70094Y30134
X72850Y26000
X76000Y30331
X78559Y24425
X50409Y26787
X110055Y25016
X110646Y29346
X110449Y32299
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PA/RF_PA.dri
+5 -5
View File
@@ -2,14 +2,14 @@ Generated by EAGLE CAM Processor 7.4.0
Drill Station Info File: C:/Users/dell/Desktop/CrowdSupply/RADAR_V6/4_Schematics and Boards Layout/4_6_Schematics/PowerAmplifierBoard/RF_PA.dri
Date : 05/04/2026 00:08
Date : 19/04/2026 01:42
Drills : generated
Device : Excellon drill station, coordinate format 2.5 inch
Parameter settings:
Tolerance Drill + : 2.50 %
Tolerance Drill - : 2.50 %
Tolerance Drill + : 0.00 %
Tolerance Drill - : 0.00 %
Rotate : no
Mirror : no
Optimize : yes
@@ -27,7 +27,7 @@ Drills used:
Code Size used
T01 0.0059inch 103
T01 0.0059inch 128
T02 0.0079inch 24
T03 0.0138inch 215
T04 0.0394inch 5
@@ -35,7 +35,7 @@ Drills used:
T06 0.0520inch 2
T07 0.1260inch 7
Total number of drills: 364
Total number of drills: 389
Plotfiles:
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PA/RF_PA.gpi
+1 -1
View File
@@ -2,7 +2,7 @@ Generated by EAGLE CAM Processor 7.4.0
Photoplotter Info File: C:/Users/dell/Desktop/CrowdSupply/RADAR_V6/4_Schematics and Boards Layout/4_6_Schematics/PowerAmplifierBoard/RF_PA.gpi
Date : 05/04/2026 00:07
Date : 19/04/2026 01:42
Plotfile : C:/Users/dell/Desktop/CrowdSupply/RADAR_V6/4_Schematics and Boards Layout/4_6_Schematics/PowerAmplifierBoard/RF_PA.fab
Apertures : generated:
Device : Gerber RS-274-X photoplotter, coordinate format 2.5 inch
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PA/RF_PA.slk
+1757 -890
View File
File diff suppressed because it is too large Load Diff
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PowerBoard/BOM_Power_Board.xlsx
BIN
View File
Binary file not shown.
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PowerBoard/CPL.xlsx
BIN
View File
Binary file not shown.
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PowerBoard/PowerBoard.bsk
+10
View File
@@ -0,0 +1,10 @@
G75*
%MOIN*%
%OFA0B0*%
%FSLAX25Y25*%
%IPPOS*%
%LPD*%
%AMOC8*
5,1,8,0,0,1.08239X$1,22.5*
%
M02*
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PowerBoard/PowerBoard.bsp
+10
View File
@@ -0,0 +1,10 @@
G75*
%MOIN*%
%OFA0B0*%
%FSLAX25Y25*%
%IPPOS*%
%LPD*%
%AMOC8*
5,1,8,0,0,1.08239X$1,22.5*
%
M02*
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PowerBoard/PowerBoard.csv
+29
View File
@@ -0,0 +1,29 @@
"Qty";"Value";"Device";"Package";"Parts";"Description";"COPYRIGHT";"DATASHEET";"DESCRIPTION";"HEIGHT";"MANUFACTURER_NAME";"MANUFACTURER_PART_NUMBER";"MF";"MFR_NAME";"MOUSER_PART_NUMBER";"MOUSER_PRICE-STOCK";"MPN";"OC_FARNELL";"OC_NEWARK";"POPULARITY";"REFDES";"SPICEPREFIX";"TYPE";
"1";"";"AK300/2";"AK300/2";"X1";"CONNECTOR";"";"";"";"";"";"";"";"";"";"";"";"unknown";"unknown";"16";"";"";"";
"1";"";"MA10-2";"MA10-2";"SV1";"PIN HEADER";"";"";"";"";"";"";"";"";"";"";"";"unknown";"unknown";"3";"";"";"";
"21";"0.1µF";"C-EUC0805";"C0805";"C1, C6, C12, C18, C29, C30, C36, C42, C54, C60, C66, C71, C76, C77, C83, C89, C109, C119, C129, C144, C154";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"88";"";"C";"";
"27";"10k";"R-EU_M0805";"M0805";"R2, R4, R6, R8, R10, R12, R14, R16, R18, R20, R22, R24, R26, R28, R30, R32, R34, R36, R38, R40, R42, R44, R46, R48, R50, R52, R56";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"45";"";"R";"";
"4";"10nF";"C-EUC0603";"C0603";"C150, C152, C160, C162";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"73";"";"C";"";
"4";"10µF";"C-EUC0603";"C0603";"C151, C153, C161, C163";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"73";"";"C";"";
"60";"10µF";"C-EUC0805";"C0805";"C4, C5, C9, C10, C15, C16, C21, C22, C24, C25, C28, C33, C34, C39, C40, C45, C46, C50, C51, C52, C53, C57, C58, C63, C64, C69, C70, C74, C75, C80, C81, C86, C87, C92, C93, C94, C95, C108, C112, C113, C114, C115, C118, C122, C123, C124, C125, C128, C132, C133, C134, C135, C138, C139, C140, C143, C147, C148, C157, C158";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"88";"";"C";"";
"2";"11.5k";"R-EU_M0805";"M0805";"R54, R58";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"45";"";"R";"";
"4";"12k";"R-EU_M0805";"M0805";"R9, R35, R43, R47";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"45";"";"R";"";
"1";"13.7k";"R-EU_M0805";"M0805";"R3";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"45";"";"R";"";
"12";"1µF";"C-EUC0805";"C0805";"C26, C27, C106, C107, C116, C117, C126, C127, C136, C137, C141, C142";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"88";"";"C";"";
"2";"2.2µH";"POWER_INDUCTOR";"IND_VLP8040T-1R0N_TDK";"U$1, U$2";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"35";"22-23-2021";"22-23-2021";"22-23-2021";"X2, X3, X4, X5, X6, X7, X8, X9, X10, X11, X12, X13, X14, X15, X16, X17, X18, X19, X20, X21, X22, X23, X24, X25, X26, X27, X28, X29, X30, X31, X32, X33, X34, X35, X36";".100" (2.54mm) Center Header - 2 Pin";"";"";"";"";"";"";"MOLEX";"";"";"";"22-23-2021";"1462926";"25C3832";"40";"";"";"";
"52";"22µF";"C-EUC0603";"C0603";"C2, C3, C7, C8, C11, C13, C14, C17, C19, C20, C23, C31, C32, C35, C37, C38, C41, C43, C44, C47, C48, C49, C55, C56, C59, C61, C62, C65, C67, C68, C72, C73, C78, C79, C82, C84, C85, C88, C90, C91, C110, C111, C120, C121, C130, C131, C145, C146, C149, C155, C156, C159";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"73";"";"C";"";
"1";"23.4k";"R-EU_M0805";"M0805";"R49";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"45";"";"R";"";
"1";"2k";"R-EU_M0805";"M0805";"R39";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"45";"";"R";"";
"1";"3.09k";"R-EU_M0805";"M0805";"R1";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"45";"";"R";"";
"19";"3.3µH";"POWER_INDUCTOR";"IND_VLP8040T-1R0N_TDK";"U$3, U$4, U$5, U$6, U$7, U$8, U$9, U$10, U$11, U$12, U$13, U$14, U$15, U$16, U$17, U$18, U$19, U$20, U$21";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"6";"32.2k";"R-EU_M0805";"M0805";"R5, R7, R11, R13, R15, R19";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"45";"";"R";"";
"1";"34.8k";"R-EU_M0805";"M0805";"R21";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"45";"";"R";"";
"2";"35.7k";"R-EU_M0805";"M0805";"R53, R57";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"45";"";"R";"";
"11";"56.2k";"R-EU_M0805";"M0805";"R17, R23, R25, R27, R29, R31, R37, R41, R45, R51, R55";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"45";"";"R";"";
"1";"61.9k";"R-EU_M0805";"M0805";"R33";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"";"45";"";"R";"";
"6";"ADM7151ACPZ-04-R7";"ADM7151ACPZ-04-R7";"CP_8_11_ADI";"U5, U23, U25, U27, U29, U30";"";"Copyright (C) 2025 Ultra Librarian. All rights reserved.";"https://www.analog.com/media/en/technical-documentation/data-sheets/ADM7151.pdf";"800 mA Ultralow Noise, High PSRR, RF Linear Regulator";"";"Analog Devices Inc";"ADM7151ACPZ-04-R7";"";"";"";"";"";"";"";"";"";"";"";
"5";"LM2662MX/NOPB";"LM2662MX/NOPB";"M08A";"U18, U19, U20, U21, U22";"";"Copyright (C) 2024 Ultra Librarian. All rights reserved.";"";"";"";"";"LM2662MX/NOPB";"";"Texas Instruments";"";"";"";"";"";"";"";"";"LM2662M";
"10";"T521W476M020ATE045";"T521W476M020ATE045";"T521W";"C96, C97, C98, C99, C100, C101, C102, C103, C104, C105";"T521, Tantalum, Polymer Tantalum, Commercial Grade, 47 uF, 20%, 20 VDC, 105C, -55C, 105C, SMD, Polymer, Molded, Low Profile/ESR, NonCombustible, 2,000 Hrs, 9 % , 45 mOhms, 94 uA, 222.95 mg, 7343, 1.4mm, Height Max = 1.5mm, 1000, 52 Weeks";"";"";"T521, Tantalum, Polymer Tantalum, Commercial Grade, 47 uF, 20%, 20 VDC, 105C, -55C, 105C, SMD, Polymer, Molded, Low Profile/ESR, NonCombustible, 2,000 Hrs, 9 % , 45 mOhms, 94 uA, 222.95 mg, 7343, 1.4mm, Height Max = 1.5mm, 1000, 52 Weeks";"1.5mm";"KEMET";"T521W476M020ATE045";"";"";"80-T521W476M20ATE045";"https://www.mouser.co.uk/ProductDetail/KEMET/T521W476M020ATE045?qs=Ad%252Bh9aq9FyVtchBw1jwoFA%3D%3D";"";"";"";"";"";"";"";
"21";"TPS562208DDCT";"TPS562208DDCT";"DDC0006A_N";"U1, U2, U3, U4, U6, U7, U8, U9, U10, U11, U12, U13, U14, U15, U16, U17, U24, U26, U28, U31, U33";"";"Copyright (C) 2025 Ultra Librarian. All rights reserved.";"https://www.ti.com/lit/gpn/tps562208";"4.5 V to 17 V input, 2 A output, synchronous step-down converter in FCCM mode 6-SOT-23-THIN -40 to 125";"";"Texas Instruments";"TPS562208DDCT";"";"";"";"";"";"";"";"";"RefDes";"";"TYPE";
"2";"TPS7A8300RGRR";"TPS7A8300RGRR";"RGR20_2P05X2P05_TEX";"U32, U34";"";"Copyright (C) 2025 Ultra Librarian. All rights reserved.";"https://www.ti.com/lit/gpn/tps7a8300";"2-A, low-VIN, low-2-A, low-VIN, low-noise, ultra-low-dropout voltage regulator with power good wi 20-VQFN -40 to 125";"";"Texas Instruments";"TPS7A8300RGRR";"";"";"";"";"";"";"";"";"";"";"";
Can't render this file because it contains an unexpected character in line 14 and column 218.
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PowerBoard/PowerBoard.dri
+1 -1
View File
@@ -2,7 +2,7 @@ Generated by EAGLE CAM Processor 7.4.0
Drill Station Info File: C:/Users/dell/Desktop/CrowdSupply/RADAR_V6/4_Schematics and Boards Layout/4_6_Schematics/PowerBoard/PowerBoard.dri
Date : 04/04/2026 22:46
Date : 19/04/2026 19:18
Drills : generated
Device : Excellon drill station, coordinate format 2.5 inch
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PowerBoard/PowerBoard.gpi
+36
View File
@@ -0,0 +1,36 @@
Generated by EAGLE CAM Processor 7.4.0
Photoplotter Info File: C:/Users/dell/Desktop/CrowdSupply/RADAR_V6/4_Schematics and Boards Layout/4_6_Schematics/PowerBoard/PowerBoard.gpi
Date : 19/04/2026 19:21
Plotfile : C:/Users/dell/Desktop/CrowdSupply/RADAR_V6/4_Schematics and Boards Layout/4_6_Schematics/PowerBoard/PowerBoard.bsp
Apertures : generated:
Device : Gerber RS-274-X photoplotter, coordinate format 2.5 inch
Parameter settings:
Emulate Apertures : no
Tolerance Draw + : 0.00 %
Tolerance Draw - : 0.00 %
Tolerance Flash + : 0.00 %
Tolerance Flash - : 0.00 %
Rotate : no
Mirror : no
Optimize : yes
Auto fit : yes
OffsetX : 0inch
OffsetY : 0inch
Plotfile Info:
Coordinate Format : 2.5
Coordinate Units : Inch
Data Mode : Absolute
Zero Suppression : None
End Of Block : *
Apertures used:
Code Shape Size used
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PowerBoard/PowerBoard.slk
+1479 -214
View File
File diff suppressed because it is too large Load Diff
4_Schematics and Boards Layout/4_7_Production Files/Gerber_PowerBoard/PowerBoard.tsp
+1630
View File
File diff suppressed because it is too large Load Diff
4_Schematics and Boards Layout/4_7_Production Files/Gerber_freq_synth/BOM_Freq_Synth.xlsx
BIN
View File
Binary file not shown.
4_Schematics and Boards Layout/4_7_Production Files/Gerber_freq_synth/CPL.xlsx
BIN
View File
Binary file not shown.
4_Schematics and Boards Layout/4_7_Production Files/Gerber_freq_synth/Clocks_Freq_Synth_board.L1
+5 -7
View File
@@ -1288,13 +1288,6 @@ X0061780Y0026543D03*
X0033236Y0247016D03*
D44*
X0102724Y0243571D03*
X0102724Y0234713D03*
X0102724Y0234713D03*
X0100854Y0226740D03*
X0109220Y0227921D03*
X0118177Y0228118D03*
X0127429Y0228217D03*
X0136976Y0228217D03*
X0102823Y0255579D03*
X0102528Y0264437D03*
X0102528Y0273197D03*
@@ -1313,6 +1306,11 @@ X0139535Y0349378D03*
X0139142Y0363551D03*
X0086386Y0388748D03*
X0065913Y0348197D03*
X0109220Y0227921D03*
X0100854Y0226740D03*
X0118177Y0228118D03*
X0127429Y0228217D03*
X0136976Y0228217D03*
X0213551Y0178118D03*
X0223000Y0177921D03*
X0223197Y0167882D03*
4_Schematics and Boards Layout/4_7_Production Files/Gerber_freq_synth/Clocks_Freq_Synth_board.L2
+6 -8
View File
@@ -134,8 +134,10 @@ X0045441Y0113945D03*
X0023000Y0123906D03*
X0023000Y0133906D03*
X0100854Y0226740D03*
X0102724Y0234713D03*
X0102724Y0234713D03*
X0109220Y0227921D03*
X0118177Y0228118D03*
X0127429Y0228217D03*
X0136976Y0228217D03*
X0102724Y0243571D03*
X0102823Y0255579D03*
X0102528Y0264437D03*
@@ -182,14 +184,10 @@ X0294063Y0355677D03*
X0348787Y0374969D03*
X0374181Y0345717D03*
X0374181Y0335717D03*
X0136976Y0228217D03*
X0127429Y0228217D03*
X0118177Y0228118D03*
X0109220Y0227921D03*
X0065913Y0348197D03*
X0086386Y0388748D03*
X0057921Y0382843D03*
X0047921Y0382843D03*
X0086386Y0388748D03*
X0065913Y0348197D03*
D15*
X0005717Y0400126D02*
X0005717Y0009654D01*
4_Schematics and Boards Layout/4_7_Production Files/Gerber_freq_synth/Clocks_Freq_Synth_board.L3
+166 -182
View File
@@ -136,8 +136,10 @@ X0045441Y0113945D03*
X0023000Y0123906D03*
X0023000Y0133906D03*
X0100854Y0226740D03*
X0102724Y0234713D03*
X0102724Y0234713D03*
X0109220Y0227921D03*
X0118177Y0228118D03*
X0127429Y0228217D03*
X0136976Y0228217D03*
X0102724Y0243571D03*
X0102823Y0255579D03*
X0102528Y0264437D03*
@@ -184,96 +186,48 @@ X0294063Y0355677D03*
X0348787Y0374969D03*
X0374181Y0345717D03*
X0374181Y0335717D03*
X0136976Y0228217D03*
X0127429Y0228217D03*
X0118177Y0228118D03*
X0109220Y0227921D03*
X0065913Y0348197D03*
X0086386Y0388748D03*
X0057921Y0382843D03*
X0047921Y0382843D03*
X0086386Y0388748D03*
X0065913Y0348197D03*
D15*
X0179299Y0276740D03*
X0179102Y0272016D03*
X0183433Y0265323D03*
X0186189Y0265323D03*
X0186189Y0262567D03*
X0183433Y0262567D03*
X0175953Y0261976D03*
X0168276Y0251937D03*
X0033236Y0247016D03*
X0164142Y0226346D03*
X0164929Y0222213D03*
X0168669Y0220047D03*
X0173394Y0221996D03*
X0173197Y0224063D03*
X0173000Y0226346D03*
X0172213Y0228453D03*
X0174181Y0229969D03*
X0174181Y0231937D03*
X0174181Y0234024D03*
X0174181Y0235795D03*
X0177173Y0240559D03*
X0179496Y0240717D03*
X0174181Y0235795D03*
X0174181Y0234024D03*
X0174181Y0231937D03*
X0174181Y0229969D03*
X0172213Y0228453D03*
X0173000Y0226346D03*
X0173197Y0224063D03*
X0173394Y0221996D03*
X0184614Y0244063D03*
X0184614Y0250559D03*
X0194457Y0246228D03*
X0194457Y0240126D03*
X0194654Y0235795D03*
X0190717Y0235992D03*
X0188748Y0235992D03*
X0184614Y0235795D03*
X0174181Y0220047D03*
X0174181Y0218079D03*
X0173787Y0216110D03*
X0173591Y0213945D03*
X0171622Y0210402D03*
X0168669Y0220047D03*
X0164929Y0222213D03*
X0164142Y0226346D03*
X0166504Y0232252D03*
X0184614Y0235795D03*
X0188748Y0235992D03*
X0190717Y0235992D03*
X0194654Y0235795D03*
X0194457Y0240126D03*
X0194457Y0246228D03*
X0184614Y0244063D03*
X0184614Y0250559D03*
X0195244Y0261976D03*
X0202921Y0259417D03*
X0210992Y0260205D03*
X0210992Y0262961D03*
X0213945Y0262961D03*
X0213945Y0260205D03*
X0222803Y0259417D03*
X0227528Y0254496D03*
X0231858Y0261780D03*
X0239732Y0262370D03*
X0239732Y0265323D03*
X0242882Y0265323D03*
X0242882Y0262370D03*
X0251740Y0261976D03*
X0248197Y0271622D03*
X0247606Y0275756D03*
X0234811Y0275756D03*
X0234811Y0272213D03*
X0217488Y0269654D03*
X0217882Y0278315D03*
X0207055Y0278315D03*
X0206858Y0269654D03*
X0189929Y0271622D03*
X0190323Y0276543D03*
X0205441Y0241504D03*
X0204969Y0239654D03*
X0205283Y0235795D03*
X0205244Y0233866D03*
X0205283Y0231858D03*
X0214339Y0223787D03*
X0205087Y0222213D03*
X0205087Y0220047D03*
X0205283Y0218079D03*
X0205283Y0216110D03*
X0205283Y0214142D03*
X0184614Y0208630D03*
X0186583Y0208827D03*
X0192488Y0209614D03*
X0194457Y0209614D03*
X0200953Y0210008D03*
X0202134Y0206268D03*
X0199575Y0200756D03*
X0194457Y0209614D03*
X0192488Y0209614D03*
X0186583Y0208827D03*
X0184614Y0208630D03*
X0182539Y0192685D03*
X0184713Y0191799D03*
X0180138Y0192685D03*
X0178118Y0191996D03*
X0196228Y0188157D03*
X0199181Y0185008D03*
X0200165Y0183039D03*
X0195835Y0178906D03*
X0195835Y0174969D03*
X0195835Y0173000D03*
@@ -291,55 +245,54 @@ X0191110Y0144260D03*
X0190717Y0132252D03*
X0200756Y0161189D03*
X0186780Y0173787D03*
X0199181Y0185008D03*
X0200165Y0183039D03*
X0196228Y0188157D03*
X0209024Y0190520D03*
X0212173Y0190520D03*
X0218472Y0190126D03*
X0218472Y0195638D03*
X0224378Y0190520D03*
X0227921Y0190323D03*
X0230283Y0190520D03*
X0232449Y0190323D03*
X0235008Y0191110D03*
X0236780Y0192685D03*
X0239929Y0190323D03*
X0245047Y0186780D03*
X0245835Y0184811D03*
X0245835Y0178906D03*
X0246031Y0173000D03*
X0245441Y0169260D03*
X0245638Y0167094D03*
X0246150Y0163157D03*
X0246228Y0161386D03*
X0245638Y0155362D03*
X0251346Y0155382D03*
X0253925Y0154988D03*
X0254201Y0157008D03*
X0254201Y0159409D03*
X0254220Y0161386D03*
X0252331Y0161976D03*
X0253315Y0173000D03*
X0252528Y0178906D03*
X0261976Y0201543D03*
X0256858Y0206071D03*
X0262567Y0210992D03*
X0261976Y0214732D03*
X0261976Y0216504D03*
X0261189Y0218236D03*
X0261780Y0220047D03*
X0262016Y0222213D03*
X0257055Y0231858D03*
X0261976Y0233827D03*
X0261976Y0235795D03*
X0259614Y0241307D03*
X0256661Y0241504D03*
X0250953Y0240126D03*
X0250953Y0235795D03*
X0247213Y0235795D03*
X0245047Y0235795D03*
X0241110Y0235795D03*
X0184713Y0191799D03*
X0182539Y0192685D03*
X0180138Y0192685D03*
X0178118Y0191996D03*
X0205283Y0214142D03*
X0205283Y0216110D03*
X0205283Y0218079D03*
X0205087Y0220047D03*
X0205087Y0222213D03*
X0214339Y0223787D03*
X0205283Y0231858D03*
X0205244Y0233866D03*
X0205283Y0235795D03*
X0204969Y0239654D03*
X0205441Y0241504D03*
X0202921Y0259417D03*
X0195244Y0261976D03*
X0186189Y0262567D03*
X0186189Y0265323D03*
X0183433Y0265323D03*
X0183433Y0262567D03*
X0175953Y0261976D03*
X0179102Y0272016D03*
X0179299Y0276740D03*
X0190323Y0276543D03*
X0189929Y0271622D03*
X0206858Y0269654D03*
X0210992Y0262961D03*
X0210992Y0260205D03*
X0213945Y0260205D03*
X0213945Y0262961D03*
X0217488Y0269654D03*
X0217882Y0278315D03*
X0207055Y0278315D03*
X0222803Y0259417D03*
X0227528Y0254496D03*
X0231858Y0261780D03*
X0239732Y0262370D03*
X0239732Y0265323D03*
X0242882Y0265323D03*
X0242882Y0262370D03*
X0251740Y0261976D03*
X0248197Y0271622D03*
X0247606Y0275756D03*
X0234811Y0275756D03*
X0234811Y0272213D03*
X0241110Y0252134D03*
X0241110Y0244063D03*
X0235008Y0240717D03*
X0231661Y0240913D03*
X0230677Y0235992D03*
@@ -366,12 +319,24 @@ X0250953Y0209811D03*
X0248984Y0209811D03*
X0243079Y0209811D03*
X0241110Y0209811D03*
X0225756Y0220244D03*
X0224575Y0226150D03*
X0223984Y0231661D03*
X0226346Y0232252D03*
X0241110Y0244063D03*
X0241110Y0252134D03*
X0256858Y0206071D03*
X0261976Y0201543D03*
X0262567Y0210992D03*
X0261976Y0214732D03*
X0261976Y0216504D03*
X0261189Y0218236D03*
X0261780Y0220047D03*
X0262016Y0222213D03*
X0257055Y0231858D03*
X0261976Y0233827D03*
X0261976Y0235795D03*
X0259614Y0241307D03*
X0256661Y0241504D03*
X0250953Y0240126D03*
X0250953Y0235795D03*
X0247213Y0235795D03*
X0245047Y0235795D03*
X0241110Y0235795D03*
X0251150Y0246425D03*
X0271622Y0263945D03*
X0270047Y0265717D03*
@@ -387,10 +352,24 @@ X0272213Y0227921D03*
X0274575Y0226937D03*
X0308079Y0212921D03*
X0310402Y0215126D03*
X0258157Y0146819D03*
X0256020Y0147016D03*
X0253618Y0147016D03*
X0252528Y0178906D03*
X0253315Y0173000D03*
X0246031Y0173000D03*
X0245441Y0169260D03*
X0245638Y0167094D03*
X0246150Y0163157D03*
X0246228Y0161386D03*
X0245638Y0155362D03*
X0251346Y0155382D03*
X0253925Y0154988D03*
X0254201Y0157008D03*
X0254201Y0159409D03*
X0254220Y0161386D03*
X0252331Y0161976D03*
X0251563Y0147114D03*
X0253618Y0147016D03*
X0256020Y0147016D03*
X0258157Y0146819D03*
X0245835Y0146819D03*
X0243079Y0147213D03*
X0241504Y0145835D03*
@@ -400,11 +379,30 @@ X0230480Y0145835D03*
X0228315Y0145835D03*
X0224378Y0145835D03*
X0222409Y0145835D03*
X0245835Y0178906D03*
X0245835Y0184811D03*
X0245047Y0186780D03*
X0239929Y0190323D03*
X0236780Y0192685D03*
X0235008Y0191110D03*
X0232449Y0190323D03*
X0230283Y0190520D03*
X0227921Y0190323D03*
X0224378Y0190520D03*
X0218472Y0190126D03*
X0212173Y0190520D03*
X0209024Y0190520D03*
X0218472Y0195638D03*
X0216307Y0210992D03*
X0225756Y0220244D03*
X0224575Y0226150D03*
X0223984Y0231661D03*
X0226346Y0232252D03*
X0168276Y0251937D03*
X0166504Y0232252D03*
X0138748Y0064535D03*
X0109417Y0061386D03*
X0061780Y0026543D03*
X0033236Y0247016D03*
D16*
X0140520Y0263551D03*
D17*
@@ -1037,14 +1035,6 @@ X0099181Y0242866D01*
X0099721Y0241564D01*
X0100717Y0240567D01*
X0100953Y0240469D01*
X0100953Y0237814D01*
X0100717Y0237716D01*
X0099721Y0236720D01*
X0099181Y0235417D01*
X0099181Y0234008D01*
X0099721Y0232705D01*
X0100717Y0231709D01*
X0100953Y0231611D01*
X0100953Y0230283D01*
X0100150Y0230283D01*
X0098847Y0229744D01*
@@ -1616,12 +1606,6 @@ X0106217Y0229928D01*
X0105677Y0228626D01*
X0105677Y0228512D01*
X0104890Y0228512D01*
X0104890Y0231867D01*
X0105728Y0232705D01*
X0106268Y0234008D01*
X0106268Y0235417D01*
X0105728Y0236720D01*
X0104890Y0237558D01*
X0104890Y0240725D01*
X0105728Y0241564D01*
X0106268Y0242866D01*
@@ -2888,35 +2872,35 @@ X0100953Y0231208D01*
X0100953Y0231600D02*
X0074575Y0231600D01*
X0074575Y0231992D02*
X0100434Y0231992D01*
X0100041Y0232385D02*
X0100953Y0231992D01*
X0100953Y0232385D02*
X0074575Y0232385D01*
X0074575Y0232777D02*
X0099691Y0232777D01*
X0099528Y0233169D02*
X0100953Y0232777D01*
X0100953Y0233169D02*
X0074575Y0233169D01*
X0074575Y0233561D02*
X0099366Y0233561D01*
X0099204Y0233954D02*
X0100953Y0233561D01*
X0100953Y0233954D02*
X0074575Y0233954D01*
X0074575Y0234346D02*
X0099181Y0234346D01*
X0099181Y0234738D02*
X0100953Y0234346D01*
X0100953Y0234738D02*
X0074575Y0234738D01*
X0074575Y0235130D02*
X0099181Y0235130D01*
X0099225Y0235522D02*
X0100953Y0235130D01*
X0100953Y0235522D02*
X0074575Y0235522D01*
X0074575Y0235915D02*
X0099387Y0235915D01*
X0099550Y0236307D02*
X0100953Y0235915D01*
X0100953Y0236307D02*
X0074575Y0236307D01*
X0074575Y0236699D02*
X0099712Y0236699D01*
X0100092Y0237091D02*
X0100953Y0236699D01*
X0100953Y0237091D02*
X0074575Y0237091D01*
X0074575Y0237483D02*
X0100484Y0237483D01*
X0100953Y0237483D01*
X0100953Y0237876D02*
X0074575Y0237876D01*
X0074575Y0238268D02*
@@ -4338,7 +4322,7 @@ X0104890Y0238268D02*
X0263945Y0238268D01*
X0263945Y0237876D02*
X0104890Y0237876D01*
X0104965Y0237483D02*
X0104890Y0237483D02*
X0263945Y0237483D01*
X0263945Y0239445D02*
X0235545Y0239445D01*
@@ -4951,24 +4935,24 @@ X0218489Y0246112D01*
X0190006Y0237091D02*
X0189458Y0237091D01*
X0188038Y0237091D02*
X0105357Y0237091D01*
X0105737Y0236699D02*
X0104890Y0237091D01*
X0104890Y0236699D02*
X0173275Y0236699D01*
X0172902Y0236307D02*
X0105899Y0236307D01*
X0106062Y0235915D02*
X0104890Y0236307D01*
X0104890Y0235915D02*
X0172902Y0235915D01*
X0172902Y0235522D02*
X0106224Y0235522D01*
X0106268Y0235130D02*
X0104890Y0235522D01*
X0104890Y0235130D02*
X0173037Y0235130D01*
X0173086Y0234738D02*
X0106268Y0234738D01*
X0106268Y0234346D02*
X0104890Y0234738D01*
X0104890Y0234346D02*
X0172902Y0234346D01*
X0172902Y0233954D02*
X0106245Y0233954D01*
X0106083Y0233561D02*
X0104890Y0233954D01*
X0104890Y0233561D02*
X0172902Y0233561D01*
X0173226Y0233169D02*
X0167396Y0233169D01*
@@ -5096,12 +5080,12 @@ X0162102Y0226502D01*
X0162468Y0226894D02*
X0162879Y0226894D01*
X0165224Y0231992D02*
X0105015Y0231992D01*
X0105407Y0232385D02*
X0104890Y0231992D01*
X0104890Y0232385D02*
X0165224Y0232385D01*
X0165224Y0232777D02*
X0105758Y0232777D01*
X0105920Y0233169D02*
X0104890Y0232777D01*
X0104890Y0233169D02*
X0165612Y0233169D01*
X0140572Y0204145D02*
X0122672Y0204145D01*
4_Schematics and Boards Layout/4_7_Production Files/Gerber_freq_synth/Clocks_Freq_Synth_board.L4
+136 -138
View File
@@ -139,8 +139,10 @@ X0045441Y0113945D03*
X0023000Y0123906D03*
X0023000Y0133906D03*
X0100854Y0226740D03*
X0102724Y0234713D03*
X0102724Y0234713D03*
X0109220Y0227921D03*
X0118177Y0228118D03*
X0127429Y0228217D03*
X0136976Y0228217D03*
X0102724Y0243571D03*
X0102823Y0255579D03*
X0102528Y0264437D03*
@@ -187,96 +189,48 @@ X0294063Y0355677D03*
X0348787Y0374969D03*
X0374181Y0345717D03*
X0374181Y0335717D03*
X0136976Y0228217D03*
X0127429Y0228217D03*
X0118177Y0228118D03*
X0109220Y0227921D03*
X0065913Y0348197D03*
X0086386Y0388748D03*
X0057921Y0382843D03*
X0047921Y0382843D03*
X0086386Y0388748D03*
X0065913Y0348197D03*
D15*
X0179299Y0276740D03*
X0179102Y0272016D03*
X0183433Y0265323D03*
X0186189Y0265323D03*
X0186189Y0262567D03*
X0183433Y0262567D03*
X0175953Y0261976D03*
X0168276Y0251937D03*
X0033236Y0247016D03*
X0164142Y0226346D03*
X0164929Y0222213D03*
X0168669Y0220047D03*
X0173394Y0221996D03*
X0173197Y0224063D03*
X0173000Y0226346D03*
X0172213Y0228453D03*
X0174181Y0229969D03*
X0174181Y0231937D03*
X0174181Y0234024D03*
X0174181Y0235795D03*
X0177173Y0240559D03*
X0179496Y0240717D03*
X0174181Y0235795D03*
X0174181Y0234024D03*
X0174181Y0231937D03*
X0174181Y0229969D03*
X0172213Y0228453D03*
X0173000Y0226346D03*
X0173197Y0224063D03*
X0173394Y0221996D03*
X0184614Y0244063D03*
X0184614Y0250559D03*
X0194457Y0246228D03*
X0194457Y0240126D03*
X0194654Y0235795D03*
X0190717Y0235992D03*
X0188748Y0235992D03*
X0184614Y0235795D03*
X0174181Y0220047D03*
X0174181Y0218079D03*
X0173787Y0216110D03*
X0173591Y0213945D03*
X0171622Y0210402D03*
X0168669Y0220047D03*
X0164929Y0222213D03*
X0164142Y0226346D03*
X0166504Y0232252D03*
X0184614Y0235795D03*
X0188748Y0235992D03*
X0190717Y0235992D03*
X0194654Y0235795D03*
X0194457Y0240126D03*
X0194457Y0246228D03*
X0184614Y0244063D03*
X0184614Y0250559D03*
X0195244Y0261976D03*
X0202921Y0259417D03*
X0210992Y0260205D03*
X0210992Y0262961D03*
X0213945Y0262961D03*
X0213945Y0260205D03*
X0222803Y0259417D03*
X0227528Y0254496D03*
X0231858Y0261780D03*
X0239732Y0262370D03*
X0239732Y0265323D03*
X0242882Y0265323D03*
X0242882Y0262370D03*
X0251740Y0261976D03*
X0248197Y0271622D03*
X0247606Y0275756D03*
X0234811Y0275756D03*
X0234811Y0272213D03*
X0217488Y0269654D03*
X0217882Y0278315D03*
X0207055Y0278315D03*
X0206858Y0269654D03*
X0189929Y0271622D03*
X0190323Y0276543D03*
X0205441Y0241504D03*
X0204969Y0239654D03*
X0205283Y0235795D03*
X0205244Y0233866D03*
X0205283Y0231858D03*
X0214339Y0223787D03*
X0205087Y0222213D03*
X0205087Y0220047D03*
X0205283Y0218079D03*
X0205283Y0216110D03*
X0205283Y0214142D03*
X0184614Y0208630D03*
X0186583Y0208827D03*
X0192488Y0209614D03*
X0194457Y0209614D03*
X0200953Y0210008D03*
X0202134Y0206268D03*
X0199575Y0200756D03*
X0194457Y0209614D03*
X0192488Y0209614D03*
X0186583Y0208827D03*
X0184614Y0208630D03*
X0182539Y0192685D03*
X0184713Y0191799D03*
X0180138Y0192685D03*
X0178118Y0191996D03*
X0196228Y0188157D03*
X0199181Y0185008D03*
X0200165Y0183039D03*
X0195835Y0178906D03*
X0195835Y0174969D03*
X0195835Y0173000D03*
@@ -294,55 +248,54 @@ X0191110Y0144260D03*
X0190717Y0132252D03*
X0200756Y0161189D03*
X0186780Y0173787D03*
X0199181Y0185008D03*
X0200165Y0183039D03*
X0196228Y0188157D03*
X0209024Y0190520D03*
X0212173Y0190520D03*
X0218472Y0190126D03*
X0218472Y0195638D03*
X0224378Y0190520D03*
X0227921Y0190323D03*
X0230283Y0190520D03*
X0232449Y0190323D03*
X0235008Y0191110D03*
X0236780Y0192685D03*
X0239929Y0190323D03*
X0245047Y0186780D03*
X0245835Y0184811D03*
X0245835Y0178906D03*
X0246031Y0173000D03*
X0245441Y0169260D03*
X0245638Y0167094D03*
X0246150Y0163157D03*
X0246228Y0161386D03*
X0245638Y0155362D03*
X0251346Y0155382D03*
X0253925Y0154988D03*
X0254201Y0157008D03*
X0254201Y0159409D03*
X0254220Y0161386D03*
X0252331Y0161976D03*
X0253315Y0173000D03*
X0252528Y0178906D03*
X0261976Y0201543D03*
X0256858Y0206071D03*
X0262567Y0210992D03*
X0261976Y0214732D03*
X0261976Y0216504D03*
X0261189Y0218236D03*
X0261780Y0220047D03*
X0262016Y0222213D03*
X0257055Y0231858D03*
X0261976Y0233827D03*
X0261976Y0235795D03*
X0259614Y0241307D03*
X0256661Y0241504D03*
X0250953Y0240126D03*
X0250953Y0235795D03*
X0247213Y0235795D03*
X0245047Y0235795D03*
X0241110Y0235795D03*
X0184713Y0191799D03*
X0182539Y0192685D03*
X0180138Y0192685D03*
X0178118Y0191996D03*
X0205283Y0214142D03*
X0205283Y0216110D03*
X0205283Y0218079D03*
X0205087Y0220047D03*
X0205087Y0222213D03*
X0214339Y0223787D03*
X0205283Y0231858D03*
X0205244Y0233866D03*
X0205283Y0235795D03*
X0204969Y0239654D03*
X0205441Y0241504D03*
X0202921Y0259417D03*
X0195244Y0261976D03*
X0186189Y0262567D03*
X0186189Y0265323D03*
X0183433Y0265323D03*
X0183433Y0262567D03*
X0175953Y0261976D03*
X0179102Y0272016D03*
X0179299Y0276740D03*
X0190323Y0276543D03*
X0189929Y0271622D03*
X0206858Y0269654D03*
X0210992Y0262961D03*
X0210992Y0260205D03*
X0213945Y0260205D03*
X0213945Y0262961D03*
X0217488Y0269654D03*
X0217882Y0278315D03*
X0207055Y0278315D03*
X0222803Y0259417D03*
X0227528Y0254496D03*
X0231858Y0261780D03*
X0239732Y0262370D03*
X0239732Y0265323D03*
X0242882Y0265323D03*
X0242882Y0262370D03*
X0251740Y0261976D03*
X0248197Y0271622D03*
X0247606Y0275756D03*
X0234811Y0275756D03*
X0234811Y0272213D03*
X0241110Y0252134D03*
X0241110Y0244063D03*
X0235008Y0240717D03*
X0231661Y0240913D03*
X0230677Y0235992D03*
@@ -369,12 +322,24 @@ X0250953Y0209811D03*
X0248984Y0209811D03*
X0243079Y0209811D03*
X0241110Y0209811D03*
X0225756Y0220244D03*
X0224575Y0226150D03*
X0223984Y0231661D03*
X0226346Y0232252D03*
X0241110Y0244063D03*
X0241110Y0252134D03*
X0256858Y0206071D03*
X0261976Y0201543D03*
X0262567Y0210992D03*
X0261976Y0214732D03*
X0261976Y0216504D03*
X0261189Y0218236D03*
X0261780Y0220047D03*
X0262016Y0222213D03*
X0257055Y0231858D03*
X0261976Y0233827D03*
X0261976Y0235795D03*
X0259614Y0241307D03*
X0256661Y0241504D03*
X0250953Y0240126D03*
X0250953Y0235795D03*
X0247213Y0235795D03*
X0245047Y0235795D03*
X0241110Y0235795D03*
X0251150Y0246425D03*
X0271622Y0263945D03*
X0270047Y0265717D03*
@@ -390,10 +355,24 @@ X0272213Y0227921D03*
X0274575Y0226937D03*
X0308079Y0212921D03*
X0310402Y0215126D03*
X0258157Y0146819D03*
X0256020Y0147016D03*
X0253618Y0147016D03*
X0252528Y0178906D03*
X0253315Y0173000D03*
X0246031Y0173000D03*
X0245441Y0169260D03*
X0245638Y0167094D03*
X0246150Y0163157D03*
X0246228Y0161386D03*
X0245638Y0155362D03*
X0251346Y0155382D03*
X0253925Y0154988D03*
X0254201Y0157008D03*
X0254201Y0159409D03*
X0254220Y0161386D03*
X0252331Y0161976D03*
X0251563Y0147114D03*
X0253618Y0147016D03*
X0256020Y0147016D03*
X0258157Y0146819D03*
X0245835Y0146819D03*
X0243079Y0147213D03*
X0241504Y0145835D03*
@@ -403,11 +382,30 @@ X0230480Y0145835D03*
X0228315Y0145835D03*
X0224378Y0145835D03*
X0222409Y0145835D03*
X0245835Y0178906D03*
X0245835Y0184811D03*
X0245047Y0186780D03*
X0239929Y0190323D03*
X0236780Y0192685D03*
X0235008Y0191110D03*
X0232449Y0190323D03*
X0230283Y0190520D03*
X0227921Y0190323D03*
X0224378Y0190520D03*
X0218472Y0190126D03*
X0212173Y0190520D03*
X0209024Y0190520D03*
X0218472Y0195638D03*
X0216307Y0210992D03*
X0225756Y0220244D03*
X0224575Y0226150D03*
X0223984Y0231661D03*
X0226346Y0232252D03*
X0168276Y0251937D03*
X0166504Y0232252D03*
X0138748Y0064535D03*
X0109417Y0061386D03*
X0061780Y0026543D03*
X0033236Y0247016D03*
D16*
X0140520Y0263551D03*
D17*
4_Schematics and Boards Layout/4_7_Production Files/Gerber_freq_synth/Clocks_Freq_Synth_board.L5
+6 -8
View File
@@ -134,8 +134,10 @@ X0045441Y0113945D03*
X0023000Y0123906D03*
X0023000Y0133906D03*
X0100854Y0226740D03*
X0102724Y0234713D03*
X0102724Y0234713D03*
X0109220Y0227921D03*
X0118177Y0228118D03*
X0127429Y0228217D03*
X0136976Y0228217D03*
X0102724Y0243571D03*
X0102823Y0255579D03*
X0102528Y0264437D03*
@@ -182,14 +184,10 @@ X0294063Y0355677D03*
X0348787Y0374969D03*
X0374181Y0345717D03*
X0374181Y0335717D03*
X0136976Y0228217D03*
X0127429Y0228217D03*
X0118177Y0228118D03*
X0109220Y0227921D03*
X0065913Y0348197D03*
X0086386Y0388748D03*
X0057921Y0382843D03*
X0047921Y0382843D03*
X0086386Y0388748D03*
X0065913Y0348197D03*
D15*
X0005717Y0400126D02*
X0005717Y0009654D01*
4_Schematics and Boards Layout/4_7_Production Files/Gerber_freq_synth/Clocks_Freq_Synth_board.L6
+5 -7
View File
@@ -349,13 +349,6 @@ X0061780Y0026543D03*
X0033236Y0247016D03*
D16*
X0102724Y0243571D03*
X0102724Y0234713D03*
X0102724Y0234713D03*
X0100854Y0226740D03*
X0109220Y0227921D03*
X0118177Y0228118D03*
X0127429Y0228217D03*
X0136976Y0228217D03*
X0102823Y0255579D03*
X0102528Y0264437D03*
X0102528Y0273197D03*
@@ -374,6 +367,11 @@ X0139535Y0349378D03*
X0139142Y0363551D03*
X0086386Y0388748D03*
X0065913Y0348197D03*
X0109220Y0227921D03*
X0100854Y0226740D03*
X0118177Y0228118D03*
X0127429Y0228217D03*
X0136976Y0228217D03*
X0213551Y0178118D03*
X0223000Y0177921D03*
X0223197Y0167882D03*
4_Schematics and Boards Layout/4_7_Production Files/Gerber_freq_synth/Clocks_Freq_Synth_board.csv
+41
View File
@@ -0,0 +1,41 @@
"Qty";"Value";"Device";"Package";"Parts";"Description";"COPYRIGHT";"DESCRIPTION";"HEIGHT";"MANUFACTURER_NAME";"MANUFACTURER_PART_NUMBER";"MF";"MFR_NAME";"MOUSER_PART_NUMBER";"MOUSER_PRICE-STOCK";"MPN";"OC_FARNELL";"OC_NEWARK";"POPULARITY";"PROD_ID";"SPICEPREFIX";"VALUE";
"3";"";"C-EUC0201";"C0201";"C4, C5, C7";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"C";"";
"5";"";"L-EUL5650M";"L5650M";"L9, L10, L11, L12, L13";"INDUCTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"L";"";
"1";"";"PINHD-2X6";"2X06";"JP1";"PIN HEADER";"";"";"";"";"";"";"";"";"";"";"";"";"8";"";"";"";
"1";"";"PINHD-2X7";"2X07";"JP2";"PIN HEADER";"";"";"";"";"";"";"";"";"";"";"";"";"8";"";"";"";
"25";"0.1µF";"C-EUC0201";"C0201";"C16, C18, C20, C22, C24, C26, C28, C30, C32, C34, C35, C36, C37, C41, C42, C43, C44, C64, C65, C66, C67, C87, C88, C90, C91";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"C";"";
"1";"0.1µf";"C-EUC0201";"C0201";"C92";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"C";"";
"2";"0.33µF";"C-EUC0201";"C0201";"C2, C6";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"C";"";
"2";"0.47µF";"C-EUC0201";"C0201";"C9, C10";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"C";"";
"1";"0.47µf";"C-EUC0201";"C0201";"C3";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"C";"";
"3";"0.65k";"R-EU_R0201";"R0201";"R6, R8, R10";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"R";"";
"9";"0R";"R-EU_R0201";"R0201";"R5, R14, R15, R19, R20, R27, R28, R32, R33";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"R";"";
"8";"1.3nH";"L-USL0201";"L0201";"L1, L2, L3, L4, L5, L6, L7, L8";"INDUCTOR, American symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"L";"";
"1";"1000pF";"C-EUC0201";"C0201";"C8";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"C";"";
"4";"100R";"R-EU_R0201";"R0201";"R1, R12, R13, R26";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"R";"";
"2";"10nF";"C-EUC0201";"C0201";"C61, C84";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"C";"";
"3";"10nF";"C-EUC0402";"C0402";"C15, C17, C19";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"18";"";"C";"";
"6";"10pF";"C-EUC0201";"C0201";"C1, C62, C63, C85, C86, C89";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"C";"";
"5";"10µF";"C-EUC1210";"C1210";"C23, C27, C31, C45, C47";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"C";"";
"11";"142-0731-211";"142-0731-211";"1420731211";"J1, J2, J5, J6, J7, J8, J9, J10, J11, J12, J13";"SMA Connector Jack, Female Socket 50 Ohms Through Hole Solder";"";"SMA Connector Jack, Female Socket 50 Ohms Through Hole Solder";"9.8852mm";"Cinch Connectivity Solutions";"142-0731-211";"";"";"530-142-0731-211";"https://www.mouser.co.uk/ProductDetail/Johnson-Cinch-Connectivity-Solutions/142-0731-211?qs=HFfMDpzxxd0OVzI3hm9tuA%3D%3D";"";"";"";"";"";"";"";
"6";"1k";"R-EU_R0201";"R0201";"R2, R3, R4, R7, R9, R11";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"R";"";
"10";"1µF";"C-EUC0201";"C0201";"C11, C12, C13, C14, C59, C68, C69, C70, C71, C82";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"C";"";
"8";"200k";"R-EU_R0201";"R0201";"R22, R23, R24, R25, R35, R36, R37, R38";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"R";"";
"6";"22-23-2021";"22-23-2021";"22-23-2021";"X10, X11, X12, X13, X14, X15";".100" (2.54mm) Center Header - 2 Pin";"";"";"";"";"";"MOLEX";"";"";"";"22-23-2021";"1462926";"25C3832";"40";"";"";"";
"3";"22R";"R-EU_R0201";"R0201";"R39, R40, R41";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"R";"";
"6";"22µF";"C-EUC1210";"C1210";"C21, C25, C29, C33, C46, C51";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"C";"";
"2";"30R";"R-EU_R0201";"R0201";"R17, R30";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"R";"";
"2";"31pF";"C-EUC0201";"C0201";"C60, C83";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"C";"";
"2";"330R";"R-EU_R0201";"R0201";"R18, R31";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"R";"";
"20";"4.7µF";"C-EUC0201";"C0201";"C38, C39, C40, C48, C49, C50, C55, C56, C57, C58, C72, C73, C74, C75, C76, C77, C78, C79, C80, C81";"CAPACITOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"C";"";
"2";"500R";"R-EU_R0201";"R0201";"R21, R34";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"R";"";
"2";"931R";"R-EU_R0201";"R0201";"R16, R29";"RESISTOR, European symbol";"";"";"";"";"";"";"";"";"";"";"";"";"0";"";"R";"";
"1";"AD9523BCPZ";"AD9523BCPZ";"QFN50P1000X1000X100-73N";"IC1";"AD9523BCPZ, PLL Clock Driver Dual, 72-Pin LFCSP VQ";"";"AD9523BCPZ, PLL Clock Driver Dual, 72-Pin LFCSP VQ";"mm";"Analog Devices";"AD9523BCPZ";"";"";"584-AD9523BCPZ";"https://www.mouser.com/Search/Refine.aspx?Keyword=584-AD9523BCPZ";"";"";"";"";"";"";"";
"2";"ADF4382ABCCZ";"ADF4382ABCCZ";"CC-48-10_ADI";"U1, U6";"";"Copyright (C) 2024 Ultra Librarian. All rights reserved.";"";"";"";"ADF4382ABCCZ";"";"Analog Devices Inc";"";"";"";"";"";"";"";"";"";
"4";"ATS1005-3DB-FD-T05";"ATS1005-3DB-FD-T05";"SMT_DB-FD-T05_SUS";"U4, U5, U8, U10";"";"Copyright (C) 2025 Ultra Librarian. All rights reserved.";"";"";"Susumu";"ATS1005-3DB-FD-T05";"";"";"";"";"";"";"";"";"";"";"";
"2";"CJT-T-P-HH-ST-TH1";"CJT-T-P-HH-ST-TH1";"CONN_CJT-T-P-XX-ST-TH1_SAI";"J3, J4";"";"Copyright (C) 2025 Ultra Librarian. All rights reserved.";"";"";"Samtec Inc";"CJT-T-P-HH-ST-TH1";"";"";"";"";"";"";"";"";"";"";"";
"2";"CVHD-950-50.000";"CVHD-950-50.000";"SMD4_CVHD-950_CRX";"X5, X6";"";"Copyright (C) 2025 Ultra Librarian. All rights reserved.";"";"";"Crystek Crystals";"CVHD-950-50.000";"";"";"";"";"";"";"";"";"";"";"";
"1";"ECOC-2522-100.000-3HC";"ECOC-2522-100.000-3HC";"SMD5_ECOC-2522_25P4X22_ECS";"X4";"";"Copyright (C) 2025 Ultra Librarian. All rights reserved.";"";"";"ECS International";"ECOC-2522-100.000-3HC";"";"";"";"";"";"";"";"";"";"";"";
"4";"FBMH1608HL601-T";"FBMH1608HL601-T";"BEADC1608X90N";"FB1, FB2, FB3, FB4";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";"";
"2";"Green";"LED-GREEN-0603-WE";"LED-0603";"D1, D2";"Green SMD LED";"";"";"";"";"";"";"";"";"";"";"";"";"";"DIO-16512";"";"Green";
"4";"MTX2-143+";"MTX2-143+";"DQ1225_MNC";"U2, U3, U7, U9";"";"Copyright (C) 2024 Ultra Librarian. All rights reserved.";"";"";"";"MTX2-143+";"";"Mini Circuits";"";"";"";"";"";"";"";"";"";
Can't render this file because it contains an unexpected character in line 24 and column 80.
4_Schematics and Boards Layout/4_7_Production Files/Gerber_freq_synth/Clocks_Freq_Synth_board.drd
-2
View File
@@ -798,8 +798,6 @@ X127429Y228217
X118177Y228118
X109220Y227921
X100854Y226740
X102724Y234713
X102724Y234713
X102724Y243571
X102823Y255579
X102528Y264437
4_Schematics and Boards Layout/4_7_Production Files/Gerber_freq_synth/Clocks_Freq_Synth_board.dri
+3 -3
View File
@@ -2,7 +2,7 @@ Generated by EAGLE CAM Processor 7.4.0
Drill Station Info File: C:/Users/dell/Desktop/CrowdSupply/RADAR_V6/4_Schematics and Boards Layout/4_6_Schematics/FrequencySynthesizerBoard/Clocks_Freq_Synth_board.dri
Date : 05/04/2026 01:09
Date : 19/04/2026 21:57
Drills : generated
Device : Excellon drill station, coordinate format 2.5 inch
@@ -33,13 +33,13 @@ Drills used:
T04 0.0197inch 34
T05 0.0250inch 4
T06 0.0330inch 8
T07 0.0394inch 84
T07 0.0394inch 82
T08 0.0400inch 26
T09 0.0470inch 44
T10 0.0787inch 1
T11 0.1260inch 4
Total number of drills: 909
Total number of drills: 907
Plotfiles:
4_Schematics and Boards Layout/4_7_Production Files/Gerber_freq_synth/Clocks_Freq_Synth_board.gpi
+1 -1
View File
@@ -2,7 +2,7 @@ Generated by EAGLE CAM Processor 7.4.0
Photoplotter Info File: C:/Users/dell/Desktop/CrowdSupply/RADAR_V6/4_Schematics and Boards Layout/4_6_Schematics/FrequencySynthesizerBoard/Clocks_Freq_Synth_board.gpi
Date : 05/04/2026 01:12
Date : 19/04/2026 21:58
Plotfile : C:/Users/dell/Desktop/CrowdSupply/RADAR_V6/4_Schematics and Boards Layout/4_6_Schematics/FrequencySynthesizerBoard/Clocks_Freq_Synth_board.bsk
Apertures : generated:
Device : Gerber RS-274-X photoplotter, coordinate format 2.5 inch
4_Schematics and Boards Layout/4_7_Production Files/Gerber_freq_synth/Clocks_Freq_Synth_board.mnb
View File
4_Schematics and Boards Layout/4_7_Production Files/Gerber_freq_synth/Clocks_Freq_Synth_board.mnt
+174
View File
@@ -0,0 +1,174 @@
C1 48.37 59.91 90 10pF C0201
C2 31.74 13.52 0 0.33ｵF C0201
C3 49.46 45.72 0 0.47ｵf C0201
C4 49.48 43.39 0 C0201
C5 49.52 42.39 0 C0201
C6 49.52 41.92 0 0.33ｵF C0201
C7 49.51 40.39 0 C0201
C8 49.51 39.87 0 1000pF C0201
C9 48.76 37.89 90 0.47ｵF C0201
C10 48.63 39.42 0 0.47ｵF C0201
C11 47.37 50.30 270 1ｵF C0201
C12 46.81 50.30 270 1ｵF C0201
C13 45.40 50.35 270 1ｵF C0201
C14 44.82 50.35 270 1ｵF C0201
C15 86.78 30.16 0 10nF C0402
C16 49.07 44.65 90 0.1ｵF C0201
C17 64.58 24.27 270 10nF C0402
C18 50.57 34.64 180 0.1ｵF C0201
C19 52.86 24.27 270 10nF C0402
C20 55.66 34.54 0 0.1ｵF C0201
C21 10.00 30.60 270 22ｵF C1210
C22 58.71 34.53 0 0.1ｵF C0201
C23 21.00 30.50 270 10ｵF C1210
C24 62.13 37.42 0 0.1ｵF C0201
C25 35.40 4.90 270 22ｵF C1210
C26 61.84 40.65 90 0.1ｵF C0201
C27 45.90 5.30 270 10ｵF C1210
C28 62.06 43.41 0 0.1ｵF C0201
C29 81.20 4.90 270 22ｵF C1210
C30 57.71 46.83 0 0.1ｵF C0201
C31 70.50 5.00 270 10ｵF C1210
C32 54.48 46.90 90 0.1ｵF C0201
C33 18.10 95.10 90 22ｵF C1210
C34 49.20 38.86 180 0.1ｵF C0201
C35 57.21 34.54 0 0.1ｵF C0201
C36 61.16 34.74 0 0.1ｵF C0201
C37 62.20 38.96 0 0.1ｵF C0201
C38 42.23 55.44 180 4.7ｵF C0201
C39 42.56 52.07 270 4.7ｵF C0201
C40 46.11 50.52 0 4.7ｵF C0201
C41 62.26 41.88 0 0.1ｵF C0201
C42 61.85 45.25 90 0.1ｵF C0201
C43 56.56 46.73 0 0.1ｵF C0201
C44 52.33 46.82 180 0.1ｵF C0201
C45 19.40 85.70 180 10ｵF C1210
C46 34.30 93.80 270 22ｵF C1210
C47 30.90 86.70 0 10ｵF C1210
C48 48.11 50.54 0 4.7ｵF C0201
C49 48.11 50.06 0 4.7ｵF C0201
C50 51.64 53.12 270 4.7ｵF C0201
C51 87.70 87.30 90 22ｵF C1210
C55 44.21 59.60 0 4.7ｵF C0201
C56 51.86 59.44 180 4.7ｵF C0201
C57 51.69 57.60 90 4.7ｵF C0201
C58 51.62 54.17 270 4.7ｵF C0201
C59 49.65 49.57 90 1ｵF C0201
C60 52.95 54.60 90 31pF C0201
C61 53.66 52.04 0 10nF C0201
C62 49.86 50.62 270 10pF C0201
C63 45.84 61.00 90 10pF C0201
C64 46.57 61.00 90 0.1ｵF C0201
C65 45.15 61.00 90 0.1ｵF C0201
C66 49.11 59.94 90 0.1ｵF C0201
C67 47.66 59.94 90 0.1ｵF C0201
C68 61.74 50.36 270 1ｵF C0201
C69 61.19 50.33 270 1ｵF C0201
C70 59.82 50.03 270 1ｵF C0201
C71 59.19 50.02 270 1ｵF C0201
C72 66.00 53.21 270 4.7ｵF C0201
C73 66.10 54.16 270 4.7ｵF C0201
C74 66.04 57.61 90 4.7ｵF C0201
C75 64.72 59.83 180 4.7ｵF C0201
C76 58.07 59.64 0 4.7ｵF C0201
C77 56.62 55.38 180 4.7ｵF C0201
C78 56.92 52.33 180 4.7ｵF C0201
C79 60.47 50.84 0 4.7ｵF C0201
C80 62.25 50.66 270 4.7ｵF C0201
C81 62.70 50.66 270 4.7ｵF C0201
C82 64.80 49.14 180 1ｵF C0201
C83 67.62 55.61 90 31pF C0201
C84 68.70 54.96 90 10nF C0201
C85 63.74 50.66 270 10pF C0201
C86 60.20 61.00 90 10pF C0201
C87 60.94 61.00 90 0.1ｵF C0201
C88 59.44 61.00 90 0.1ｵF C0201
C89 62.70 59.91 90 10pF C0201
C90 63.47 59.91 90 0.1ｵF C0201
C91 61.97 59.91 90 0.1ｵF C0201
C92 16.93 67.92 180 0.1ｵf C0201
D1 41.75 59.88 90 Green LED-0603
D2 56.83 60.61 90 Green LED-0603
FB1 68.41 56.87 180 FBMH1608HL601-T BEADC1608X90N
FB2 53.58 56.01 180 FBMH1608HL601-T BEADC1608X90N
FB3 52.06 49.65 0 FBMH1608HL601-T BEADC1608X90N
FB4 63.46 48.33 270 FBMH1608HL601-T BEADC1608X90N
IC1 55.70 40.67 0 AD9523BCPZ QFN50P1000X1000X100-73N
J1 52.94 90.00 0 142-0731-211 1420731211
J2 92.86 49.36 90 142-0731-211 1420731211
J5 64.56 17.84 0 142-0731-211 1420731211
J6 52.79 18.27 0 142-0731-211 1420731211
J7 92.71 30.20 90 142-0731-211 1420731211
J8 92.71 16.28 0 142-0731-211 1420731211
J9 9.85 82.37 180 142-0731-211 1420731211
J10 45.93 74.00 0 142-0731-211 1420731211
J11 60.20 74.00 0 142-0731-211 1420731211
J12 74.38 71.98 45 142-0731-211 1420731211
J13 11.67 67.91 90 142-0731-211 1420731211
L1 48.80 59.32 0 1.3nH L0201
L2 46.29 60.40 0 1.3nH L0201
L3 45.44 60.40 0 1.3nH L0201
L4 47.95 59.32 0 1.3nH L0201
L5 60.67 60.40 0 1.3nH L0201
L6 59.77 60.40 0 1.3nH L0201
L7 63.17 59.31 0 1.3nH L0201
L8 62.27 59.31 0 1.3nH L0201
L9 15.40 31.90 180 L5650M
L10 40.80 6.20 180 L5650M
L11 75.80 6.30 0 L5650M
L12 22.20 91.00 90 L5650M
L13 29.60 92.70 90 L5650M
R1 61.47 51.11 0 100R R0201
R2 7.14 58.81 180 1k R0201
R3 7.38 59.72 270 1k R0201
R4 31.78 14.16 0 1k R0201
R5 48.02 38.16 0 0R R0201
R6 16.38 13.37 270 0.65k R0201
R7 16.37 12.32 270 1k R0201
R8 13.86 21.50 90 0.65k R0201
R9 13.82 22.69 90 1k R0201
R10 16.36 21.55 90 0.65k R0201
R11 16.42 22.70 90 1k R0201
R12 47.11 51.07 0 100R R0201
R13 45.11 51.07 0 100R R0201
R14 51.74 56.17 270 0R R0201
R15 51.96 55.04 0 0R R0201
R16 52.78 53.71 180 931R R0201
R17 52.48 52.85 90 30R R0201
R18 52.71 52.07 0 330R R0201
R19 51.62 50.89 0 0R R0201
R20 50.61 50.88 0 0R R0201
R21 42.53 57.17 270 500R R0201
R22 41.78 56.69 270 200k R0201
R23 41.34 55.73 90 200k R0201
R24 42.32 54.09 270 200k R0201
R25 41.39 54.64 270 200k R0201
R26 59.47 51.16 0 100R R0201
R27 65.87 56.55 0 0R R0201
R28 65.90 55.35 0 0R R0201
R29 66.92 55.36 180 931R R0201
R30 67.63 54.52 90 30R R0201
R31 68.47 54.26 0 330R R0201
R32 65.46 50.90 0 0R R0201
R33 64.54 50.90 0 0R R0201
R34 56.82 58.21 270 500R R0201
R35 56.94 56.71 270 200k R0201
R36 55.84 56.16 270 200k R0201
R37 56.84 54.16 270 200k R0201
R38 56.24 54.61 270 200k R0201
R39 63.22 41.38 0 22R R0201
R40 59.45 33.47 270 22R R0201
R41 57.97 33.47 270 22R R0201
U1 47.12 55.12 180 ADF4382ABCCZ CC-48-10_ADI
U2 45.91 65.00 270 MTX2-143+ DQ1225_MNC
U3 52.91 64.38 270 MTX2-143+ DQ1225_MNC
U4 45.91 68.00 180 ATS1005-3DB-FD-T05 SMT_DB-FD-T05_SUS
U5 52.94 68.68 180 ATS1005-3DB-FD-T05 SMT_DB-FD-T05_SUS
U6 61.48 55.12 180 ADF4382ABCCZ CC-48-10_ADI
U7 60.21 65.00 270 MTX2-143+ DQ1225_MNC
U8 60.20 68.00 180 ATS1005-3DB-FD-T05 SMT_DB-FD-T05_SUS
U9 67.91 65.62 225 MTX2-143+ DQ1225_MNC
U10 70.09 67.84 135 ATS1005-3DB-FD-T05 SMT_DB-FD-T05_SUS
X4 23.07 49.95 0 ECOC-2522-100.000-3HC SMD5_ECOC-2522_25P4X22_ECS
X5 34.12 31.62 90 CVHD-950-50.000 SMD4_CVHD-950_CRX
X6 33.87 19.97 90 CVHD-950-50.000 SMD4_CVHD-950_CRX
4_Schematics and Boards Layout/4_7_Production Files/Gerber_freq_synth/Clocks_Freq_Synth_board.smb
-2
View File
@@ -159,8 +159,6 @@ X0127429Y0228217D03*
X0118177Y0228118D03*
X0109220Y0227921D03*
X0100854Y0226740D03*
X0102724Y0234713D03*
X0102724Y0234713D03*
X0102724Y0243571D03*
X0102823Y0255579D03*
X0102528Y0264437D03*
4_Schematics and Boards Layout/4_7_Production Files/Gerber_freq_synth/Clocks_Freq_Synth_board.smt
+1 -3
View File
@@ -1334,10 +1334,8 @@ X0102528Y0273197D03*
X0102528Y0264437D03*
X0102823Y0255579D03*
X0102724Y0243571D03*
X0102724Y0234713D03*
X0102724Y0234713D03*
X0100854Y0226740D03*
X0109220Y0227921D03*
X0100854Y0226740D03*
X0118177Y0228118D03*
X0127429Y0228217D03*
X0136976Y0228217D03*
8_Utils/AERIS-10_RADAR.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 378 KiB

9_Firmware/9_1_Microcontroller/9_1_1_C_Cpp_Libraries/ADAR1000_AGC.cpp
+1 -1
View File
@@ -18,7 +18,7 @@ ADAR1000_AGC::ADAR1000_AGC()
, min_gain(0)
, max_gain(127)
, holdoff_frames(4)
, enabled(true)
, enabled(false)
, holdoff_counter(0)
, last_saturated(false)
, saturation_event_count(0)
9_Firmware/9_1_Microcontroller/9_1_1_C_Cpp_Libraries/ADAR1000_Manager.cpp
+59 -6
View File
@@ -20,18 +20,71 @@ static const struct {
{ADAR_4_CS_3V3_GPIO_Port, ADAR_4_CS_3V3_Pin} // ADAR1000 #4
};
// Vector Modulator lookup tables
// ADAR1000 Vector Modulator lookup tables (128-state phase grid, 2.8125 deg step).
//
// Source: Analog Devices ADAR1000 datasheet Rev. B, Tables 13-16, page 34
// (7_Components Datasheets and Application notes/ADAR1000.pdf)
// Cross-checked against the ADI Linux mainline driver (GPL-2.0, NOT vendored):
// https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/
// drivers/iio/beamformer/adar1000.c (adar1000_phase_values[])
// The 128 byte values themselves are factual data from the datasheet and are
// not subject to copyright; only the ADI driver code is GPL.
//
// Byte format (per datasheet):
// bit [7:6] reserved (0)
// bit [5] polarity: 1 = positive lobe (sign(I) or sign(Q) >= 0)
// 0 = negative lobe
// bits [4:0] 5-bit unsigned magnitude (0..31)
// At magnitude=0 the polarity bit is physically meaningless; the datasheet
// uses POL=1 (e.g. VM_Q at 0 deg = 0x20, VM_I at 90 deg = 0x21).
//
// Index mapping is uniform: VM_I[k] / VM_Q[k] correspond to phase angle
// k * 360/128 = k * 2.8125 degrees. Callers index as VM_*[phase % 128].
const uint8_t ADAR1000Manager::VM_I[128] = {
// ... (same as in your original file)
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3E, 0x3E, 0x3D, // [ 0] 0.0000 deg
0x3D, 0x3C, 0x3C, 0x3B, 0x3A, 0x39, 0x38, 0x37, // [ 8] 22.5000 deg
0x36, 0x35, 0x34, 0x33, 0x32, 0x30, 0x2F, 0x2E, // [ 16] 45.0000 deg
0x2C, 0x2B, 0x2A, 0x28, 0x27, 0x25, 0x24, 0x22, // [ 24] 67.5000 deg
0x21, 0x01, 0x03, 0x04, 0x06, 0x07, 0x08, 0x0A, // [ 32] 90.0000 deg
0x0B, 0x0D, 0x0E, 0x0F, 0x11, 0x12, 0x13, 0x14, // [ 40] 112.5000 deg
0x16, 0x17, 0x18, 0x19, 0x19, 0x1A, 0x1B, 0x1C, // [ 48] 135.0000 deg
0x1C, 0x1D, 0x1E, 0x1E, 0x1E, 0x1F, 0x1F, 0x1F, // [ 56] 157.5000 deg
0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1E, 0x1E, 0x1D, // [ 64] 180.0000 deg
0x1D, 0x1C, 0x1C, 0x1B, 0x1A, 0x19, 0x18, 0x17, // [ 72] 202.5000 deg
0x16, 0x15, 0x14, 0x13, 0x12, 0x10, 0x0F, 0x0E, // [ 80] 225.0000 deg
0x0C, 0x0B, 0x0A, 0x08, 0x07, 0x05, 0x04, 0x02, // [ 88] 247.5000 deg
0x01, 0x21, 0x23, 0x24, 0x26, 0x27, 0x28, 0x2A, // [ 96] 270.0000 deg
0x2B, 0x2D, 0x2E, 0x2F, 0x31, 0x32, 0x33, 0x34, // [104] 292.5000 deg
0x36, 0x37, 0x38, 0x39, 0x39, 0x3A, 0x3B, 0x3C, // [112] 315.0000 deg
0x3C, 0x3D, 0x3E, 0x3E, 0x3E, 0x3F, 0x3F, 0x3F, // [120] 337.5000 deg
};
const uint8_t ADAR1000Manager::VM_Q[128] = {
// ... (same as in your original file)
0x20, 0x21, 0x23, 0x24, 0x26, 0x27, 0x28, 0x2A, // [ 0] 0.0000 deg
0x2B, 0x2D, 0x2E, 0x2F, 0x30, 0x31, 0x33, 0x34, // [ 8] 22.5000 deg
0x35, 0x36, 0x37, 0x38, 0x38, 0x39, 0x3A, 0x3A, // [ 16] 45.0000 deg
0x3B, 0x3C, 0x3C, 0x3C, 0x3D, 0x3D, 0x3D, 0x3D, // [ 24] 67.5000 deg
0x3D, 0x3D, 0x3D, 0x3D, 0x3D, 0x3C, 0x3C, 0x3C, // [ 32] 90.0000 deg
0x3B, 0x3A, 0x3A, 0x39, 0x38, 0x38, 0x37, 0x36, // [ 40] 112.5000 deg
0x35, 0x34, 0x33, 0x31, 0x30, 0x2F, 0x2E, 0x2D, // [ 48] 135.0000 deg
0x2B, 0x2A, 0x28, 0x27, 0x26, 0x24, 0x23, 0x21, // [ 56] 157.5000 deg
0x20, 0x01, 0x03, 0x04, 0x06, 0x07, 0x08, 0x0A, // [ 64] 180.0000 deg
0x0B, 0x0D, 0x0E, 0x0F, 0x10, 0x11, 0x13, 0x14, // [ 72] 202.5000 deg
0x15, 0x16, 0x17, 0x18, 0x18, 0x19, 0x1A, 0x1A, // [ 80] 225.0000 deg
0x1B, 0x1C, 0x1C, 0x1C, 0x1D, 0x1D, 0x1D, 0x1D, // [ 88] 247.5000 deg
0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x1C, 0x1C, // [ 96] 270.0000 deg
0x1B, 0x1A, 0x1A, 0x19, 0x18, 0x18, 0x17, 0x16, // [104] 292.5000 deg
0x15, 0x14, 0x13, 0x11, 0x10, 0x0F, 0x0E, 0x0D, // [112] 315.0000 deg
0x0B, 0x0A, 0x08, 0x07, 0x06, 0x04, 0x03, 0x01, // [120] 337.5000 deg
};
const uint8_t ADAR1000Manager::VM_GAIN[128] = {
// ... (same as in your original file)
};
// NOTE: a VM_GAIN[128] table previously existed here as a placeholder but was
// never populated and never read. The ADAR1000 vector modulator has no
// separate gain register: phase-state magnitude is encoded directly in
// bits [4:0] of the VM_I/VM_Q bytes above. Per-channel VGA gain is a
// distinct register (CHx_RX_GAIN at 0x10-0x13, CHx_TX_GAIN at 0x1C-0x1F)
// written with the user-supplied byte directly by adarSetRxVgaGain() /
// adarSetTxVgaGain(). Do not reintroduce a VM_GAIN[] array.
ADAR1000Manager::ADAR1000Manager() {
for (int i = 0; i < 4; ++i) {
9_Firmware/9_1_Microcontroller/9_1_1_C_Cpp_Libraries/ADAR1000_Manager.h
+5 -3
View File
@@ -116,10 +116,12 @@ public:
bool beam_sweeping_active_ = false;
uint32_t last_beam_update_time_ = 0;
// Lookup tables
static const uint8_t VM_I[128];
// Vector Modulator lookup tables (see ADAR1000_Manager.cpp for provenance).
// Indexed as VM_*[phase % 128] on a uniform 2.8125 deg grid.
// No VM_GAIN[] table exists: VM magnitude is bits [4:0] of the I/Q bytes
// themselves; per-channel VGA gain uses a separate register.
static const uint8_t VM_I[128];
static const uint8_t VM_Q[128];
static const uint8_t VM_GAIN[128];
// Named defaults for the ADTR1107 and ADAR1000 power sequence.
static constexpr uint8_t kDefaultTxVgaGain = 0x7F;
9_Firmware/9_1_Microcontroller/9_1_1_C_Cpp_Libraries/adar1000.c
-693
View File
@@ -1,693 +0,0 @@
/**
* MIT License
*
* Copyright (c) 2020 Jimmy Pentz
*
* Reach me at: github.com/jgpentz, jpentz1(at)gmail.com
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sells
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
/* ADAR1000 4-Channel, X Band and Ku Band Beamformer */
// ----------------------------------------------------------------------------
// Includes
// ----------------------------------------------------------------------------
#include "main.h"
#include "stm32f7xx_hal.h"
#include "stm32f7xx_hal_spi.h"
#include "stm32f7xx_hal_gpio.h"
#include "adar1000.h"
// ----------------------------------------------------------------------------
// Preprocessor Definitions and Constants
// ----------------------------------------------------------------------------
// VM_GAIN is 15 dB of gain in 128 steps. ~0.12 dB per step.
// A 15 dB attenuator can be applied on top of these values.
const uint8_t VM_GAIN[128] = {
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f,
0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f,
0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f,
};
// VM_I and VM_Q are the settings for the vector modulator. 128 steps in 360 degrees. ~2.813 degrees per step.
const uint8_t VM_I[128] = {
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3E, 0x3E, 0x3D, 0x3D, 0x3C, 0x3C, 0x3B, 0x3A, 0x39, 0x38, 0x37,
0x36, 0x35, 0x34, 0x33, 0x32, 0x30, 0x2F, 0x2E, 0x2C, 0x2B, 0x2A, 0x28, 0x27, 0x25, 0x24, 0x22,
0x21, 0x01, 0x03, 0x04, 0x06, 0x07, 0x08, 0x0A, 0x0B, 0x0D, 0x0E, 0x0F, 0x11, 0x12, 0x13, 0x14,
0x16, 0x17, 0x18, 0x19, 0x19, 0x1A, 0x1B, 0x1C, 0x1C, 0x1D, 0x1E, 0x1E, 0x1E, 0x1F, 0x1F, 0x1F,
0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1E, 0x1E, 0x1D, 0x1D, 0x1C, 0x1C, 0x1B, 0x1A, 0x19, 0x18, 0x17,
0x16, 0x15, 0x14, 0x13, 0x12, 0x10, 0x0F, 0x0E, 0x0C, 0x0B, 0x0A, 0x08, 0x07, 0x05, 0x04, 0x02,
0x01, 0x21, 0x23, 0x24, 0x26, 0x27, 0x28, 0x2A, 0x2B, 0x2D, 0x2E, 0x2F, 0x31, 0x32, 0x33, 0x34,
0x36, 0x37, 0x38, 0x39, 0x39, 0x3A, 0x3B, 0x3C, 0x3C, 0x3D, 0x3E, 0x3E, 0x3E, 0x3F, 0x3F, 0x3F,
};
const uint8_t VM_Q[128] = {
0x20, 0x21, 0x23, 0x24, 0x26, 0x27, 0x28, 0x2A, 0x2B, 0x2D, 0x2E, 0x2F, 0x30, 0x31, 0x33, 0x34,
0x35, 0x36, 0x37, 0x38, 0x38, 0x39, 0x3A, 0x3A, 0x3B, 0x3C, 0x3C, 0x3C, 0x3D, 0x3D, 0x3D, 0x3D,
0x3D, 0x3D, 0x3D, 0x3D, 0x3D, 0x3C, 0x3C, 0x3C, 0x3B, 0x3A, 0x3A, 0x39, 0x38, 0x38, 0x37, 0x36,
0x35, 0x34, 0x33, 0x31, 0x30, 0x2F, 0x2E, 0x2D, 0x2B, 0x2A, 0x28, 0x27, 0x26, 0x24, 0x23, 0x21,
0x20, 0x01, 0x03, 0x04, 0x06, 0x07, 0x08, 0x0A, 0x0B, 0x0D, 0x0E, 0x0F, 0x10, 0x11, 0x13, 0x14,
0x15, 0x16, 0x17, 0x18, 0x18, 0x19, 0x1A, 0x1A, 0x1B, 0x1C, 0x1C, 0x1C, 0x1D, 0x1D, 0x1D, 0x1D,
0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x1C, 0x1C, 0x1B, 0x1A, 0x1A, 0x19, 0x18, 0x18, 0x17, 0x16,
0x15, 0x14, 0x13, 0x11, 0x10, 0x0F, 0x0E, 0x0D, 0x0B, 0x0A, 0x08, 0x07, 0x06, 0x04, 0x03, 0x01,
};
// ----------------------------------------------------------------------------
// Function Definitions
// ----------------------------------------------------------------------------
/**
* @brief Initialize the ADC on the ADAR by setting the ADC with a 2 MHz clk,
* and then enable it.
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
* @param broadcast Send the message as a broadcast to all ADARs in the SPI chain
* if this set to BROADCAST_ON.
*
* @warning This is setup to only read temperature sensor data, not the power detectors.
*/
void Adar_AdcInit(const AdarDevice * p_adar, uint8_t broadcast)
{
uint8_t data;
data = ADAR1000_ADC_2MHZ_CLK | ADAR1000_ADC_EN;
Adar_Write(p_adar, REG_ADC_CONTROL, data, broadcast);
}
/**
* @brief Read a byte of data from the ADAR.
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
* @param broadcast Send the message as a broadcast to all ADARs in the SPI chain
* if this set to BROADCAST_ON.
*
* @return Returns a byte of data that has been converted from the temperature sensor.
*
* @warning This is setup to only read temperature sensor data, not the power detectors.
*/
uint8_t Adar_AdcRead(const AdarDevice * p_adar, uint8_t broadcast)
{
uint8_t data;
// Start the ADC conversion
Adar_Write(p_adar, REG_ADC_CONTROL, ADAR1000_ADC_ST_CONV, broadcast);
// This is blocking for now... wait until data is converted, then read it
while (!(Adar_Read(p_adar, REG_ADC_CONTROL) & 0x01))
{
}
data = Adar_Read(p_adar, REG_ADC_OUT);
return(data);
}
/**
* @brief Requests the device info from a specific ADAR and stores it in the
* provided AdarDeviceInfo struct.
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
* @param info[out] Struct that contains the device info fields.
*
* @return Returns ADAR_ERROR_NOERROR if information was successfully received and stored in the struct.
*/
uint8_t Adar_GetDeviceInfo(const AdarDevice * p_adar, AdarDeviceInfo * info)
{
*((uint8_t *)info) = Adar_Read(p_adar, 0x002);
info->chip_type = Adar_Read(p_adar, 0x003);
info->product_id = ((uint16_t)Adar_Read(p_adar, 0x004)) << 8;
info->product_id |= ((uint16_t)Adar_Read(p_adar, 0x005)) & 0x00ff;
info->scratchpad = Adar_Read(p_adar, 0x00A);
info->spi_rev = Adar_Read(p_adar, 0x00B);
info->vendor_id = ((uint16_t)Adar_Read(p_adar, 0x00C)) << 8;
info->vendor_id |= ((uint16_t)Adar_Read(p_adar, 0x00D)) & 0x00ff;
info->rev_id = Adar_Read(p_adar, 0x045);
return(ADAR_ERROR_NOERROR);
}
/**
* @brief Read the data that is stored in a single ADAR register.
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
* @param mem_addr Memory address of the register you wish to read from.
*
* @return Returns the byte of data that is stored in the desired register.
*
* @warning This function will clear ADDR_ASCN bits.
* @warning The ADAR does not allow for block reads.
*/
uint8_t Adar_Read(const AdarDevice * p_adar, uint32_t mem_addr)
{
uint8_t instruction[3];
// Set SDO active
Adar_Write(p_adar, REG_INTERFACE_CONFIG_A, INTERFACE_CONFIG_A_SDO_ACTIVE, 0);
instruction[0] = 0x80 | ((p_adar->dev_addr & 0x03) << 5);
instruction[0] |= ((0xff00 & mem_addr) >> 8);
instruction[1] = (0xff & mem_addr);
instruction[2] = 0x00;
p_adar->Transfer(instruction, p_adar->p_rx_buffer, ADAR1000_RD_SIZE);
// Set SDO Inactive
Adar_Write(p_adar, REG_INTERFACE_CONFIG_A, 0, 0);
return(p_adar->p_rx_buffer[2]);
}
/**
* @brief Block memory write to an ADAR device.
*
* @pre ADDR_ASCN bits in register zero must be set!
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
* @param mem_addr Memory address of the register you wish to read from.
* @param p_data Pointer to block of data to transfer (must have two unused bytes preceding the data for instruction).
* @param size Size of data in bytes, including the two additional leading bytes.
*
* @warning First two bytes of data will be corrupted if you do not provide two unused leading bytes!
*/
void Adar_ReadBlock(const AdarDevice * p_adar, uint16_t mem_addr, uint8_t * p_data, uint32_t size)
{
// Set SDO active
Adar_Write(p_adar, REG_INTERFACE_CONFIG_A, INTERFACE_CONFIG_A_SDO_ACTIVE | INTERFACE_CONFIG_A_ADDR_ASCN, 0);
// Prepare command
p_data[0] = 0x80 | ((p_adar->dev_addr & 0x03) << 5);
p_data[0] |= ((mem_addr) >> 8) & 0x1F;
p_data[1] = (0xFF & mem_addr);
// Start the transfer
p_adar->Transfer(p_data, p_data, size);
Adar_Write(p_adar, REG_INTERFACE_CONFIG_A, 0, 0);
// Return nothing since we assume this is non-blocking and won't wait around
}
/**
* @brief Sets the Rx/Tx bias currents for the LNA, VM, and VGA to be in either
* low power setting or nominal setting.
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
* @param p_bias[in] An AdarBiasCurrents struct filled with bias settings
* as seen in the datasheet Table 6. SPI Settings for
* Different Power Modules
* @param broadcast Send the message as a broadcast to all ADARs in the SPI chain
* if this set to BROADCAST_ON.
*
* @return Returns ADAR_ERR_NOERROR if the bias currents were set
*/
uint8_t Adar_SetBiasCurrents(const AdarDevice * p_adar, AdarBiasCurrents * p_bias, uint8_t broadcast)
{
uint8_t bias = 0;
// RX LNA/VGA/VM bias
bias = (p_bias->rx_lna & 0x0f);
Adar_Write(p_adar, REG_BIAS_CURRENT_RX_LNA, bias, broadcast); // RX LNA bias
bias = (p_bias->rx_vga & 0x07 << 3) | (p_bias->rx_vm & 0x07);
Adar_Write(p_adar, REG_BIAS_CURRENT_RX, bias, broadcast); // RX VM/VGA bias
// TX VGA/VM/DRV bias
bias = (p_bias->tx_vga & 0x07 << 3) | (p_bias->tx_vm & 0x07);
Adar_Write(p_adar, REG_BIAS_CURRENT_TX, bias, broadcast); // TX VM/VGA bias
bias = (p_bias->tx_drv & 0x07);
Adar_Write(p_adar, REG_BIAS_CURRENT_TX_DRV, bias, broadcast); // TX DRV bias
return(ADAR_ERROR_NOERROR);
}
/**
* @brief Set the bias ON and bias OFF voltages for the four PA's and one LNA.
*
* @pre This will set all 5 bias ON values and all 5 bias OFF values at once.
* To enable these bias values, please see the data sheet and ensure that the BIAS_CTRL,
* LNA_BIAS_OUT_EN, TR_SOURCE, TX_EN, RX_EN, TR (input to chip), and PA_ON (input to chip)
* bits have all been properly set.
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
* @param bias_on_voltage Array that contains the bias ON voltages.
* @param bias_off_voltage Array that contains the bias OFF voltages.
*
* @return Returns ADAR_ERR_NOERROR if the bias currents were set
*/
uint8_t Adar_SetBiasVoltages(const AdarDevice * p_adar, uint8_t bias_on_voltage[5], uint8_t bias_off_voltage[5])
{
Adar_SetBit(p_adar, 0x30, 6, BROADCAST_OFF);
Adar_SetBit(p_adar, 0x31, 2, BROADCAST_OFF);
Adar_SetBit(p_adar, 0x38, 5, BROADCAST_OFF);
Adar_Write(p_adar, REG_PA_CH1_BIAS_ON,bias_on_voltage[0], BROADCAST_OFF);
Adar_Write(p_adar, REG_PA_CH2_BIAS_ON,bias_on_voltage[1], BROADCAST_OFF);
Adar_Write(p_adar, REG_PA_CH3_BIAS_ON,bias_on_voltage[2], BROADCAST_OFF);
Adar_Write(p_adar, REG_PA_CH4_BIAS_ON,bias_on_voltage[3], BROADCAST_OFF);
Adar_Write(p_adar, REG_PA_CH1_BIAS_OFF,bias_off_voltage[0], BROADCAST_OFF);
Adar_Write(p_adar, REG_PA_CH2_BIAS_OFF,bias_off_voltage[1], BROADCAST_OFF);
Adar_Write(p_adar, REG_PA_CH3_BIAS_OFF,bias_off_voltage[2], BROADCAST_OFF);
Adar_Write(p_adar, REG_PA_CH4_BIAS_OFF,bias_off_voltage[3], BROADCAST_OFF);
Adar_SetBit(p_adar, 0x30, 4, BROADCAST_OFF);
Adar_SetBit(p_adar, 0x30, 6, BROADCAST_OFF);
Adar_SetBit(p_adar, 0x31, 2, BROADCAST_OFF);
Adar_SetBit(p_adar, 0x38, 5, BROADCAST_OFF);
Adar_Write(p_adar, REG_LNA_BIAS_ON,bias_on_voltage[4], BROADCAST_OFF);
Adar_Write(p_adar, REG_LNA_BIAS_OFF,bias_off_voltage[4], BROADCAST_OFF);
Adar_ResetBit(p_adar, 0x30, 7, BROADCAST_OFF);
Adar_SetBit(p_adar, 0x31, 2, BROADCAST_OFF);
Adar_SetBit(p_adar, 0x31, 4, BROADCAST_OFF);
Adar_SetBit(p_adar, 0x31, 7, BROADCAST_OFF);
return(ADAR_ERROR_NOERROR);
}
/**
* @brief Setup the ADAR to use settings that are transferred over SPI.
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
* @param broadcast Send the message as a broadcast to all ADARs in the SPI chain
* if this set to BROADCAST_ON.
*
* @return Returns ADAR_ERR_NOERROR if the bias currents were set
*/
uint8_t Adar_SetRamBypass(const AdarDevice * p_adar, uint8_t broadcast)
{
uint8_t data;
data = (MEM_CTRL_BIAS_RAM_BYPASS | MEM_CTRL_BEAM_RAM_BYPASS);
Adar_Write(p_adar, REG_MEM_CTL, data, broadcast);
return(ADAR_ERROR_NOERROR);
}
/**
* @brief Set the VGA gain value of a Receive channel in dB.
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
* @param channel Channel in which to set the gain (1-4).
* @param vga_gain_db Gain to be applied to the channel, ranging from 0 - 30 dB.
* (Intended operation >16 dB).
* @param broadcast Send the message as a broadcast to all ADARs in the SPI chain
* if this set to BROADCAST_ON.
*
* @return Returns ADAR_ERROR_NOERROR if the gain was successfully set.
* ADAR_ERROR_FAILED if an invalid channel was selected.
*
* @warning 0 dB or 15 dB step attenuator may also be turned on, which is why intended operation is >16 dB.
*/
uint8_t Adar_SetRxVgaGain(const AdarDevice * p_adar, uint8_t channel, uint8_t vga_gain_db, uint8_t broadcast)
{
uint8_t vga_gain_bits = (uint8_t)(255*vga_gain_db/16);
uint32_t mem_addr = 0;
if((channel == 0) || (channel > 4))
{
return(ADAR_ERROR_FAILED);
}
mem_addr = REG_CH1_RX_GAIN + (channel & 0x03);
// Set gain
Adar_Write(p_adar, mem_addr, vga_gain_bits, broadcast);
// Load the new setting
Adar_Write(p_adar, REG_LOAD_WORKING, 0x1, broadcast);
return(ADAR_ERROR_NOERROR);
}
/**
* @brief Set the phase of a given receive channel using the I/Q vector modulator.
*
* @pre According to the given @param phase, this sets the polarity (bit 5) and gain (bits 4-0)
* of the @param channel, and then loads them into the working register.
* A vector modulator I/Q look-up table has been provided at the beginning of this library.
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
* @param channel Channel in which to set the gain (1-4).
* @param phase Byte that is used to set the polarity (bit 5) and gain (bits 4-0).
* @param broadcast Send the message as a broadcast to all ADARs in the SPI chain
* if this set to BROADCAST_ON.
*
* @return Returns ADAR_ERROR_NOERROR if the phase was successfully set.
* ADAR_ERROR_FAILED if an invalid channel was selected.
*
* @note To obtain your phase:
* phase = degrees * 128;
* phase /= 360;
*/
uint8_t Adar_SetRxPhase(const AdarDevice * p_adar, uint8_t channel, uint8_t phase, uint8_t broadcast)
{
uint8_t i_val = 0;
uint8_t q_val = 0;
uint32_t mem_addr_i, mem_addr_q;
if((channel == 0) || (channel > 4))
{
return(ADAR_ERROR_FAILED);
}
//phase = phase % 128;
i_val = VM_I[phase];
q_val = VM_Q[phase];
mem_addr_i = REG_CH1_RX_PHS_I + (channel & 0x03) * 2;
mem_addr_q = REG_CH1_RX_PHS_Q + (channel & 0x03) * 2;
Adar_Write(p_adar, mem_addr_i, i_val, broadcast);
Adar_Write(p_adar, mem_addr_q, q_val, broadcast);
Adar_Write(p_adar, REG_LOAD_WORKING, 0x1, broadcast);
return(ADAR_ERROR_NOERROR);
}
/**
* @brief Set the VGA gain value of a Tx channel in dB.
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
* @param broadcast Send the message as a broadcast to all ADARs in the SPI chain
* if this set to BROADCAST_ON.
*
* @return Returns ADAR_ERROR_NOERROR if the bias was successfully set.
* ADAR_ERROR_FAILED if an invalid channel was selected.
*
* @warning 0 dB or 15 dB step attenuator may also be turned on, which is why intended operation is >16 dB.
*/
uint8_t Adar_SetTxBias(const AdarDevice * p_adar, uint8_t broadcast)
{
uint8_t vga_bias_bits;
uint8_t drv_bias_bits;
uint32_t mem_vga_bias;
uint32_t mem_drv_bias;
mem_vga_bias = REG_BIAS_CURRENT_TX;
mem_drv_bias = REG_BIAS_CURRENT_TX_DRV;
// Set bias to nom
vga_bias_bits = 0x2D;
drv_bias_bits = 0x06;
// Set bias
Adar_Write(p_adar, mem_vga_bias, vga_bias_bits, broadcast);
// Set bias
Adar_Write(p_adar, mem_drv_bias, drv_bias_bits, broadcast);
// Load the new setting
Adar_Write(p_adar, REG_LOAD_WORKING, 0x2, broadcast);
return(ADAR_ERROR_NOERROR);
}
/**
* @brief Set the VGA gain value of a Tx channel.
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
* @param channel Tx channel in which to set the gain, ranging from 1 - 4.
* @param gain Gain to be applied to the channel, ranging from 0 - 127,
* plus the MSb 15dB attenuator (Intended operation >16 dB).
* @param broadcast Send the message as a broadcast to all ADARs in the SPI chain
* if this set to BROADCAST_ON.
*
* @return Returns ADAR_ERROR_NOERROR if the gain was successfully set.
* ADAR_ERROR_FAILED if an invalid channel was selected.
*
* @warning 0 dB or 15 dB step attenuator may also be turned on, which is why intended operation is >16 dB.
*/
uint8_t Adar_SetTxVgaGain(const AdarDevice * p_adar, uint8_t channel, uint8_t gain, uint8_t broadcast)
{
uint32_t mem_addr;
if((channel == 0) || (channel > 4))
{
return(ADAR_ERROR_FAILED);
}
mem_addr = REG_CH1_TX_GAIN + (channel & 0x03);
// Set gain
Adar_Write(p_adar, mem_addr, gain, broadcast);
// Load the new setting
Adar_Write(p_adar, REG_LOAD_WORKING, LD_WRK_REGS_LDTX_OVERRIDE, broadcast);
return(ADAR_ERROR_NOERROR);
}
/**
* @brief Set the phase of a given transmit channel using the I/Q vector modulator.
*
* @pre According to the given @param phase, this sets the polarity (bit 5) and gain (bits 4-0)
* of the @param channel, and then loads them into the working register.
* A vector modulator I/Q look-up table has been provided at the beginning of this library.
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
* @param channel Channel in which to set the gain (1-4).
* @param phase Byte that is used to set the polarity (bit 5) and gain (bits 4-0).
* @param broadcast Send the message as a broadcast to all ADARs in the SPI chain
* if this set to BROADCAST_ON.
*
* @return Returns ADAR_ERROR_NOERROR if the phase was successfully set.
* ADAR_ERROR_FAILED if an invalid channel was selected.
*
* @note To obtain your phase:
* phase = degrees * 128;
* phase /= 360;
*/
uint8_t Adar_SetTxPhase(const AdarDevice * p_adar, uint8_t channel, uint8_t phase, uint8_t broadcast)
{
uint8_t i_val = 0;
uint8_t q_val = 0;
uint32_t mem_addr_i, mem_addr_q;
if((channel == 0) || (channel > 4))
{
return(ADAR_ERROR_FAILED);
}
//phase = phase % 128;
i_val = VM_I[phase];
q_val = VM_Q[phase];
mem_addr_i = REG_CH1_TX_PHS_I + (channel & 0x03) * 2;
mem_addr_q = REG_CH1_TX_PHS_Q + (channel & 0x03) * 2;
Adar_Write(p_adar, mem_addr_i, i_val, broadcast);
Adar_Write(p_adar, mem_addr_q, q_val, broadcast);
Adar_Write(p_adar, REG_LOAD_WORKING, 0x1, broadcast);
return(ADAR_ERROR_NOERROR);
}
/**
* @brief Reset the whole ADAR device.
*
* @param p_adar[in] ADAR pointer Which specifies the device and what function
* to use for SPI transfer.
*/
void Adar_SoftReset(const AdarDevice * p_adar)
{
uint8_t instruction[3];
instruction[0] = ((p_adar->dev_addr & 0x03) << 5);
instruction[1] = 0x00;
instruction[2] = 0x81;
p_adar->Transfer(instruction, NULL, sizeof(instruction));
}
/**
* @brief Reset ALL ADAR devices in the SPI chain.
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
*/
void Adar_SoftResetAll(const AdarDevice * p_adar)
{
uint8_t instruction[3];
instruction[0] = 0x08;
instruction[1] = 0x00;
instruction[2] = 0x81;
p_adar->Transfer(instruction, NULL, sizeof(instruction));
}
/**
* @brief Write a byte of @param data to the register located at @param mem_addr.
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
* @param mem_addr Memory address of the register you wish to read from.
* @param data Byte of data to be stored in the register.
* @param broadcast Send the message as a broadcast to all ADARs in the SPI chain
if this set to BROADCAST_ON.
*
* @warning If writing the same data to multiple registers, use ADAR_WriteBlock.
*/
void Adar_Write(const AdarDevice * p_adar, uint32_t mem_addr, uint8_t data, uint8_t broadcast)
{
uint8_t instruction[3];
if (broadcast)
{
instruction[0] = 0x08;
}
else
{
instruction[0] = ((p_adar->dev_addr & 0x03) << 5);
}
instruction[0] |= (0x1F00 & mem_addr) >> 8;
instruction[1] = (0xFF & mem_addr);
instruction[2] = data;
p_adar->Transfer(instruction, NULL, sizeof(instruction));
}
/**
* @brief Block memory write to an ADAR device.
*
* @pre ADDR_ASCN BITS IN REGISTER ZERO MUST BE SET!
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
* @param mem_addr Memory address of the register you wish to read from.
* @param p_data[in] Pointer to block of data to transfer (must have two unused bytes
preceding the data for instruction).
* @param size Size of data in bytes, including the two additional leading bytes.
*
* @warning First two bytes of data will be corrupted if you do not provide two unused leading bytes!
*/
void Adar_WriteBlock(const AdarDevice * p_adar, uint16_t mem_addr, uint8_t * p_data, uint32_t size)
{
// Prepare command
p_data[0] = ((p_adar->dev_addr & 0x03) << 5);
p_data[0] |= ((mem_addr) >> 8) & 0x1F;
p_data[1] = (0xFF & mem_addr);
// Start the transfer
p_adar->Transfer(p_data, NULL, size);
// Return nothing since we assume this is non-blocking and won't wait around
}
/**
* @brief Set contents of the INTERFACE_CONFIG_A register.
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
* @param flags #INTERFACE_CONFIG_A_SOFTRESET, #INTERFACE_CONFIG_A_LSB_FIRST,
* #INTERFACE_CONFIG_A_ADDR_ASCN, #INTERFACE_CONFIG_A_SDO_ACTIVE
* @param broadcast Send the message as a broadcast to all ADARs in the SPI chain
* if this set to BROADCAST_ON.
*/
void Adar_WriteConfigA(const AdarDevice * p_adar, uint8_t flags, uint8_t broadcast)
{
Adar_Write(p_adar, 0x00, flags, broadcast);
}
/**
* @brief Write a byte of @param data to the register located at @param mem_addr and
* then read from the device and verify that the register was correctly set.
*
* @param p_adar[in] Adar pointer Which specifies the device and what function
* to use for SPI transfer.
* @param mem_addr Memory address of the register you wish to read from.
* @param data Byte of data to be stored in the register.
*
* @return Returns the number of attempts that it took to successfully write to a register,
* starting from zero.
* @warning This function currently only supports writes to a single regiter in a single ADAR.
*/
uint8_t Adar_WriteVerify(const AdarDevice * p_adar, uint32_t mem_addr, uint8_t data)
{
uint8_t rx_data;
for (uint8_t ii = 0; ii < 3; ii++)
{
Adar_Write(p_adar, mem_addr, data, 0);
// Can't read back from an ADAR with HW address 0
if (!((p_adar->dev_addr) % 4))
{
return(ADAR_ERROR_INVALIDADDR);
}
rx_data = Adar_Read(p_adar, mem_addr);
if (rx_data == data)
{
return(ii);
}
}
return(ADAR_ERROR_FAILED);
}
void Adar_SetBit(const AdarDevice * p_adar, uint32_t mem_addr, uint8_t bit, uint8_t broadcast)
{
uint8_t temp = Adar_Read(p_adar, mem_addr);
uint8_t data = temp|(1<<bit);
Adar_Write(p_adar,mem_addr, data,broadcast);
}
void Adar_ResetBit(const AdarDevice * p_adar, uint32_t mem_addr, uint8_t bit, uint8_t broadcast)
{
uint8_t temp = Adar_Read(p_adar, mem_addr);
uint8_t data = temp&~(1<<bit);
Adar_Write(p_adar,mem_addr, data,broadcast);
}
9_Firmware/9_1_Microcontroller/9_1_1_C_Cpp_Libraries/adar1000.h
-294
View File
@@ -1,294 +0,0 @@
/**
* MIT License
*
* Copyright (c) 2020 Jimmy Pentz
*
* Reach me at: github.com/jgpentz, jpentz1( at )gmail.com
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sells
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
/* ADAR1000 4-Channel, X Band and Ku Band Beamformer */
#ifndef LIB_ADAR1000_H_
#define LIB_ADAR1000_H_
#ifndef NULL
#define NULL (0)
#endif
// ----------------------------------------------------------------------------
// Includes
// ----------------------------------------------------------------------------
#include "main.h"
#include "stm32f7xx_hal.h"
#include "stm32f7xx_hal_spi.h"
#include "stm32f7xx_hal_gpio.h"
#include <stdbool.h>
#include <stdint.h>
#include <string.h>
#ifdef __cplusplus
extern "C" { // Prevent C++ name mangling
#endif
// ----------------------------------------------------------------------------
// Datatypes
// ----------------------------------------------------------------------------
extern SPI_HandleTypeDef hspi1;
extern const uint8_t VM_GAIN[128];
extern const uint8_t VM_I[128];
extern const uint8_t VM_Q[128];
/// A function pointer prototype for a SPI transfer, the 3 parameters would be
/// p_txData, p_rxData, and size (number of bytes to transfer), respectively.
typedef uint32_t (*Adar_SpiTransfer)( uint8_t *, uint8_t *, uint32_t);
typedef struct
{
uint8_t dev_addr; ///< 2-bit device hardware address, 0x00, 0x01, 0x10, 0x11
Adar_SpiTransfer Transfer; ///< Function pointer to the function used for SPI transfers
uint8_t * p_rx_buffer; ///< Data buffer to store received bytes into
}const AdarDevice;
/// Use this to store bias current values into, as seen in the datasheet
/// Table 6. SPI Settings for Different Power Modules
typedef struct
{
uint8_t rx_lna; ///< nominal: 8, low power: 5
uint8_t rx_vm; ///< nominal: 5, low power: 2
uint8_t rx_vga; ///< nominal: 10, low power: 3
uint8_t tx_vm; ///< nominal: 5, low power: 2
uint8_t tx_vga; ///< nominal: 5, low power: 5
uint8_t tx_drv; ///< nominal: 6, low power: 3
} AdarBiasCurrents;
/// Useful for queries regarding the device info
typedef struct
{
uint8_t norm_operating_mode : 2;
uint8_t cust_operating_mode : 2;
uint8_t dev_status : 4;
uint8_t chip_type;
uint16_t product_id;
uint8_t scratchpad;
uint8_t spi_rev;
uint16_t vendor_id;
uint8_t rev_id;
} AdarDeviceInfo;
/// Return types for functions in this library
typedef enum {
ADAR_ERROR_NOERROR = 0,
ADAR_ERROR_FAILED = 1,
ADAR_ERROR_INVALIDADDR = 2,
} AdarErrorCodes;
// ----------------------------------------------------------------------------
// Function Prototypes
// ----------------------------------------------------------------------------
void Adar_AdcInit(const AdarDevice * p_adar, uint8_t broadcast_bit);
uint8_t Adar_AdcRead(const AdarDevice * p_adar, uint8_t broadcast_bit);
uint8_t Adar_GetDeviceInfo(const AdarDevice * p_adar, AdarDeviceInfo * info);
uint8_t Adar_Read(const AdarDevice * p_adar, uint32_t mem_addr);
void Adar_ReadBlock(const AdarDevice * p_adar, uint16_t mem_addr, uint8_t * p_data, uint32_t size);
uint8_t Adar_SetBiasCurrents(const AdarDevice * p_adar, AdarBiasCurrents * p_bias, uint8_t broadcast_bit);
uint8_t Adar_SetBiasVoltages(const AdarDevice * p_adar, uint8_t bias_on_voltage[5], uint8_t bias_off_voltage[5]);
uint8_t Adar_SetRamBypass(const AdarDevice * p_adar, uint8_t broadcast_bit);
uint8_t Adar_SetRxVgaGain(const AdarDevice * p_adar, uint8_t channel, uint8_t vga_gain_db, uint8_t broadcast_bit);
uint8_t Adar_SetRxPhase(const AdarDevice * p_adar, uint8_t channel, uint8_t phase, uint8_t broadcast_bit);
uint8_t Adar_SetTxBias(const AdarDevice * p_adar, uint8_t broadcast_bit);
uint8_t Adar_SetTxVgaGain(const AdarDevice * p_adar, uint8_t channel, uint8_t vga_gain_db, uint8_t broadcast_bit);
uint8_t Adar_SetTxPhase(const AdarDevice * p_adar, uint8_t channel, uint8_t phase, uint8_t broadcast_bit);
void Adar_SoftReset(const AdarDevice * p_adar);
void Adar_SoftResetAll(const AdarDevice * p_adar);
void Adar_Write(const AdarDevice * p_adar, uint32_t mem_addr, uint8_t data, uint8_t broadcast_bit);
void Adar_WriteBlock(const AdarDevice * p_adar, uint16_t mem_addr, uint8_t * p_data, uint32_t size);
void Adar_WriteConfigA(const AdarDevice * p_adar, uint8_t flags, uint8_t broadcast);
uint8_t Adar_WriteVerify(const AdarDevice * p_adar, uint32_t mem_addr, uint8_t data);
void Adar_SetBit(const AdarDevice * p_adar, uint32_t mem_addr, uint8_t bit, uint8_t broadcast);
void Adar_ResetBit(const AdarDevice * p_adar, uint32_t mem_addr, uint8_t bit, uint8_t broadcast);
// ----------------------------------------------------------------------------
// Preprocessor Definitions and Constants
// ----------------------------------------------------------------------------
// Using BROADCAST_ON will send a command to all ADARs that share a bus
#define BROADCAST_OFF 0
#define BROADCAST_ON 1
// The minimum size of a read from the ADARs consists of 3 bytes
#define ADAR1000_RD_SIZE 3
// Address at which the TX RAM starts
#define ADAR_TX_RAM_START_ADDR 0x1800
// ADC Defines
#define ADAR1000_ADC_2MHZ_CLK 0x00
#define ADAR1000_ADC_EN 0x60
#define ADAR1000_ADC_ST_CONV 0x70
/* REGISTER DEFINITIONS */
#define REG_INTERFACE_CONFIG_A 0x000
#define REG_INTERFACE_CONFIG_B 0x001
#define REG_DEV_CONFIG 0x002
#define REG_SCRATCHPAD 0x00A
#define REG_TRANSFER 0x00F
#define REG_CH1_RX_GAIN 0x010
#define REG_CH2_RX_GAIN 0x011
#define REG_CH3_RX_GAIN 0x012
#define REG_CH4_RX_GAIN 0x013
#define REG_CH1_RX_PHS_I 0x014
#define REG_CH1_RX_PHS_Q 0x015
#define REG_CH2_RX_PHS_I 0x016
#define REG_CH2_RX_PHS_Q 0x017
#define REG_CH3_RX_PHS_I 0x018
#define REG_CH3_RX_PHS_Q 0x019
#define REG_CH4_RX_PHS_I 0x01A
#define REG_CH4_RX_PHS_Q 0x01B
#define REG_CH1_TX_GAIN 0x01C
#define REG_CH2_TX_GAIN 0x01D
#define REG_CH3_TX_GAIN 0x01E
#define REG_CH4_TX_GAIN 0x01F
#define REG_CH1_TX_PHS_I 0x020
#define REG_CH1_TX_PHS_Q 0x021
#define REG_CH2_TX_PHS_I 0x022
#define REG_CH2_TX_PHS_Q 0x023
#define REG_CH3_TX_PHS_I 0x024
#define REG_CH3_TX_PHS_Q 0x025
#define REG_CH4_TX_PHS_I 0x026
#define REG_CH4_TX_PHS_Q 0x027
#define REG_LOAD_WORKING 0x028
#define REG_PA_CH1_BIAS_ON 0x029
#define REG_PA_CH2_BIAS_ON 0x02A
#define REG_PA_CH3_BIAS_ON 0x02B
#define REG_PA_CH4_BIAS_ON 0x02C
#define REG_LNA_BIAS_ON 0x02D
#define REG_RX_ENABLES 0x02E
#define REG_TX_ENABLES 0x02F
#define REG_MISC_ENABLES 0x030
#define REG_SW_CONTROL 0x031
#define REG_ADC_CONTROL 0x032
#define REG_ADC_CONTROL_TEMP_EN 0xf0
#define REG_ADC_OUT 0x033
#define REG_BIAS_CURRENT_RX_LNA 0x034
#define REG_BIAS_CURRENT_RX 0x035
#define REG_BIAS_CURRENT_TX 0x036
#define REG_BIAS_CURRENT_TX_DRV 0x037
#define REG_MEM_CTL 0x038
#define REG_RX_CHX_MEM 0x039
#define REG_TX_CHX_MEM 0x03A
#define REG_RX_CH1_MEM 0x03D
#define REG_RX_CH2_MEM 0x03E
#define REG_RX_CH3_MEM 0x03F
#define REG_RX_CH4_MEM 0x040
#define REG_TX_CH1_MEM 0x041
#define REG_TX_CH2_MEM 0x042
#define REG_TX_CH3_MEM 0x043
#define REG_TX_CH4_MEM 0x044
#define REG_PA_CH1_BIAS_OFF 0x046
#define REG_PA_CH2_BIAS_OFF 0x047
#define REG_PA_CH3_BIAS_OFF 0x048
#define REG_PA_CH4_BIAS_OFF 0x049
#define REG_LNA_BIAS_OFF 0x04A
#define REG_TX_BEAM_STEP_START 0x04D
#define REG_TX_BEAM_STEP_STOP 0x04E
#define REG_RX_BEAM_STEP_START 0x04F
#define REG_RX_BEAM_STEP_STOP 0x050
// REGISTER CONSTANTS
#define INTERFACE_CONFIG_A_SOFTRESET ((1 << 7) | (1 << 0))
#define INTERFACE_CONFIG_A_LSB_FIRST ((1 << 6) | (1 << 1))
#define INTERFACE_CONFIG_A_ADDR_ASCN ((1 << 5) | (1 << 2))
#define INTERFACE_CONFIG_A_SDO_ACTIVE ((1 << 4) | (1 << 3))
#define LD_WRK_REGS_LDRX_OVERRIDE (1 << 0)
#define LD_WRK_REGS_LDTX_OVERRIDE (1 << 1)
#define RX_ENABLES_TX_VGA_EN (1 << 0)
#define RX_ENABLES_TX_VM_EN (1 << 1)
#define RX_ENABLES_TX_DRV_EN (1 << 2)
#define RX_ENABLES_CH3_TX_EN (1 << 3)
#define RX_ENABLES_CH2_TX_EN (1 << 4)
#define RX_ENABLES_CH1_TX_EN (1 << 5)
#define RX_ENABLES_CH0_TX_EN (1 << 6)
#define TX_ENABLES_TX_VGA_EN (1 << 0)
#define TX_ENABLES_TX_VM_EN (1 << 1)
#define TX_ENABLES_TX_DRV_EN (1 << 2)
#define TX_ENABLES_CH3_TX_EN (1 << 3)
#define TX_ENABLES_CH2_TX_EN (1 << 4)
#define TX_ENABLES_CH1_TX_EN (1 << 5)
#define TX_ENABLES_CH0_TX_EN (1 << 6)
#define MISC_ENABLES_CH4_DET_EN (1 << 0)
#define MISC_ENABLES_CH3_DET_EN (1 << 1)
#define MISC_ENABLES_CH2_DET_EN (1 << 2)
#define MISC_ENABLES_CH1_DET_EN (1 << 3)
#define MISC_ENABLES_LNA_BIAS_OUT_EN (1 << 4)
#define MISC_ENABLES_BIAS_EN (1 << 5)
#define MISC_ENABLES_BIAS_CTRL (1 << 6)
#define MISC_ENABLES_SW_DRV_TR_MODE_SEL (1 << 7)
#define SW_CTRL_POL (1 << 0)
#define SW_CTRL_TR_SPI (1 << 1)
#define SW_CTRL_TR_SOURCE (1 << 2)
#define SW_CTRL_SW_DRV_EN_POL (1 << 3)
#define SW_CTRL_SW_DRV_EN_TR (1 << 4)
#define SW_CTRL_RX_EN (1 << 5)
#define SW_CTRL_TX_EN (1 << 6)
#define SW_CTRL_SW_DRV_TR_STATE (1 << 7)
#define MEM_CTRL_RX_CHX_RAM_BYPASS (1 << 0)
#define MEM_CTRL_TX_CHX_RAM_BYPASS (1 << 1)
#define MEM_CTRL_RX_BEAM_STEP_EN (1 << 2)
#define MEM_CTRL_TX_BEAM_STEP_EN (1 << 3)
#define MEM_CTRL_BIAS_RAM_BYPASS (1 << 5)
#define MEM_CTRL_BEAM_RAM_BYPASS (1 << 6)
#define MEM_CTRL_SCAN_MODE_EN (1 << 7)
#ifdef __cplusplus
} // End extern "C"
#endif
#endif /* LIB_ADAR1000_H_ */
9_Firmware/9_1_Microcontroller/9_1_1_C_Cpp_Libraries/diag_log.h
+1 -1
View File
@@ -112,7 +112,7 @@ extern "C" {
* "BF" -- ADAR1000 beamformer
* "PA" -- Power amplifier bias/monitoring
* "FPGA" -- FPGA communication and handshake
* "USB" -- FT601 USB data path
* "USB" -- USB data path (FT2232H production / FT601 premium)
* "PWR" -- Power sequencing and rail monitoring
* "IMU" -- IMU/GPS/barometer sensors
* "MOT" -- Stepper motor/scan mechanics
9_Firmware/9_1_Microcontroller/9_1_3_C_Cpp_Code/main.cpp
+18 -4
View File
@@ -21,7 +21,6 @@
#include "usb_device.h"
#include "USBHandler.h"
#include "usbd_cdc_if.h"
#include "adar1000.h"
#include "ADAR1000_Manager.h"
#include "ADAR1000_AGC.h"
extern "C" {
@@ -2180,9 +2179,24 @@ int main(void)
runRadarPulseSequence();
/* [AGC] Outer-loop AGC: read FPGA saturation flag (DIG_5 / PD13),
* adjust ADAR1000 VGA common gain once per radar frame (~258 ms).
* Only run when AGC is enabled — otherwise leave VGA gains untouched. */
/* [AGC] Outer-loop AGC: sync enable from FPGA via DIG_6 (PD14),
* then read saturation flag (DIG_5 / PD13) and adjust ADAR1000 VGA
* common gain once per radar frame (~258 ms).
* FPGA register host_agc_enable is the single source of truth —
* DIG_6 propagates it to MCU every frame.
* 2-frame confirmation debounce: only change outerAgc.enabled when
* two consecutive frames read the same DIG_6 value. Prevents a
* single-sample glitch from causing a spurious AGC state transition.
* Added latency: 1 extra frame (~258 ms), acceptable for control plane. */
{
bool dig6_now = (HAL_GPIO_ReadPin(FPGA_DIG6_GPIO_Port,
FPGA_DIG6_Pin) == GPIO_PIN_SET);
static bool dig6_prev = false; // matches boot default (AGC off)
if (dig6_now == dig6_prev) {
outerAgc.enabled = dig6_now;
}
dig6_prev = dig6_now;
}
if (outerAgc.enabled) {
bool sat = HAL_GPIO_ReadPin(FPGA_DIG5_SAT_GPIO_Port,
FPGA_DIG5_SAT_Pin) == GPIO_PIN_SET;
9_Firmware/9_1_Microcontroller/tests/test_agc_outer_loop.cpp
+9 -1
View File
@@ -50,7 +50,7 @@ static void test_defaults()
assert(agc.min_gain == 0);
assert(agc.max_gain == 127);
assert(agc.holdoff_frames == 4);
assert(agc.enabled == true);
assert(agc.enabled == false); // disabled by default — FPGA DIG_6 is source of truth
assert(agc.holdoff_counter == 0);
assert(agc.last_saturated == false);
assert(agc.saturation_event_count == 0);
@@ -67,6 +67,7 @@ static void test_defaults()
static void test_saturation_reduces_gain()
{
ADAR1000_AGC agc;
agc.enabled = true; // default is OFF; enable for this test
uint8_t initial = agc.agc_base_gain; // 30
agc.update(true); // saturation
@@ -82,6 +83,7 @@ static void test_saturation_reduces_gain()
static void test_holdoff_prevents_early_gain_up()
{
ADAR1000_AGC agc;
agc.enabled = true; // default is OFF; enable for this test
agc.update(true); // saturate once -> gain = 26
uint8_t after_sat = agc.agc_base_gain;
@@ -101,6 +103,7 @@ static void test_holdoff_prevents_early_gain_up()
static void test_recovery_after_holdoff()
{
ADAR1000_AGC agc;
agc.enabled = true; // default is OFF; enable for this test
agc.update(true); // saturate -> gain = 26
uint8_t after_sat = agc.agc_base_gain;
@@ -119,6 +122,7 @@ static void test_recovery_after_holdoff()
static void test_min_gain_clamp()
{
ADAR1000_AGC agc;
agc.enabled = true; // default is OFF; enable for this test
agc.min_gain = 10;
agc.agc_base_gain = 12;
agc.gain_step_down = 4;
@@ -136,6 +140,7 @@ static void test_min_gain_clamp()
static void test_max_gain_clamp()
{
ADAR1000_AGC agc;
agc.enabled = true; // default is OFF; enable for this test
agc.max_gain = 32;
agc.agc_base_gain = 31;
agc.gain_step_up = 2;
@@ -226,6 +231,7 @@ static void test_apply_gain_spi()
static void test_reset_preserves_config()
{
ADAR1000_AGC agc;
agc.enabled = true; // default is OFF; enable for this test
agc.agc_base_gain = 42;
agc.gain_step_down = 8;
agc.cal_offset[3] = -5;
@@ -255,6 +261,7 @@ static void test_reset_preserves_config()
static void test_saturation_counter()
{
ADAR1000_AGC agc;
agc.enabled = true; // default is OFF; enable for this test
for (int i = 0; i < 10; ++i) {
agc.update(true);
@@ -274,6 +281,7 @@ static void test_saturation_counter()
static void test_mixed_sequence()
{
ADAR1000_AGC agc;
agc.enabled = true; // default is OFF; enable for this test
agc.agc_base_gain = 30;
agc.gain_step_down = 4;
agc.gain_step_up = 1;
9_Firmware/9_2_FPGA/cdc_modules.v
-139
View File
@@ -137,145 +137,6 @@ module cdc_adc_to_processing #(
endmodule
// ============================================================================
// ASYNC FIFO FOR CONTINUOUS SAMPLE STREAMS
// ============================================================================
// Replaces cdc_adc_to_processing for the DDC path where the CIC decimator
// produces samples at ~100 MSPS from a 400 MHz clock and the consumer runs
// at 100 MHz. Gray-coded read/write pointers (the only valid use of Gray
// encoding across clock domains) ensure no data corruption or loss.
//
// Depth must be a power of 2. Default 8 entries gives comfortable margin
// for the 4:1 decimated stream (1 sample per 4 src clocks, 1 consumer
// clock per sample).
// ============================================================================
module cdc_async_fifo #(
parameter WIDTH = 18,
parameter DEPTH = 8, // Must be power of 2
parameter ADDR_BITS = 3 // log2(DEPTH)
)(
// Write (source) domain
input wire wr_clk,
input wire wr_reset_n,
input wire [WIDTH-1:0] wr_data,
input wire wr_en,
output wire wr_full,
// Read (destination) domain
input wire rd_clk,
input wire rd_reset_n,
output wire [WIDTH-1:0] rd_data,
output wire rd_valid,
input wire rd_ack // Consumer asserts to pop
);
// Gray code conversion functions
function [ADDR_BITS:0] bin2gray;
input [ADDR_BITS:0] bin;
bin2gray = bin ^ (bin >> 1);
endfunction
function [ADDR_BITS:0] gray2bin;
input [ADDR_BITS:0] gray;
reg [ADDR_BITS:0] bin;
integer k;
begin
bin[ADDR_BITS] = gray[ADDR_BITS];
for (k = ADDR_BITS-1; k >= 0; k = k - 1)
bin[k] = bin[k+1] ^ gray[k];
gray2bin = bin;
end
endfunction
// ------- Pointer declarations (both domains, before use) -------
// Write domain pointers
reg [ADDR_BITS:0] wr_ptr_bin = 0; // Extra bit for full/empty
reg [ADDR_BITS:0] wr_ptr_gray = 0;
// Read domain pointers (declared here so write domain can synchronize them)
reg [ADDR_BITS:0] rd_ptr_bin = 0;
reg [ADDR_BITS:0] rd_ptr_gray = 0;
// ------- Write domain -------
// Synchronized read pointer in write domain (scalar regs, not memory
// arrays — avoids iverilog sensitivity/NBA bugs on array elements and
// gives synthesis explicit flop names for ASYNC_REG constraints)
(* ASYNC_REG = "TRUE" *) reg [ADDR_BITS:0] rd_ptr_gray_sync0 = 0;
(* ASYNC_REG = "TRUE" *) reg [ADDR_BITS:0] rd_ptr_gray_sync1 = 0;
// FIFO memory (inferred as distributed RAM — small depth)
reg [WIDTH-1:0] mem [0:DEPTH-1];
wire wr_addr_match = (wr_ptr_gray == rd_ptr_gray_sync1);
wire wr_wrap_match = (wr_ptr_gray[ADDR_BITS] != rd_ptr_gray_sync1[ADDR_BITS]) &&
(wr_ptr_gray[ADDR_BITS-1] != rd_ptr_gray_sync1[ADDR_BITS-1]) &&
(wr_ptr_gray[ADDR_BITS-2:0] == rd_ptr_gray_sync1[ADDR_BITS-2:0]);
assign wr_full = wr_wrap_match;
always @(posedge wr_clk) begin
if (!wr_reset_n) begin
wr_ptr_bin <= 0;
wr_ptr_gray <= 0;
rd_ptr_gray_sync0 <= 0;
rd_ptr_gray_sync1 <= 0;
end else begin
// Synchronize read pointer into write domain
rd_ptr_gray_sync0 <= rd_ptr_gray;
rd_ptr_gray_sync1 <= rd_ptr_gray_sync0;
// Write
if (wr_en && !wr_full) begin
mem[wr_ptr_bin[ADDR_BITS-1:0]] <= wr_data;
wr_ptr_bin <= wr_ptr_bin + 1;
wr_ptr_gray <= bin2gray(wr_ptr_bin + 1);
end
end
end
// ------- Read domain -------
// Synchronized write pointer in read domain (scalar regs — see above)
(* ASYNC_REG = "TRUE" *) reg [ADDR_BITS:0] wr_ptr_gray_sync0 = 0;
(* ASYNC_REG = "TRUE" *) reg [ADDR_BITS:0] wr_ptr_gray_sync1 = 0;
wire rd_empty = (rd_ptr_gray == wr_ptr_gray_sync1);
// Output register — holds data until consumed
reg [WIDTH-1:0] rd_data_reg = 0;
reg rd_valid_reg = 0;
always @(posedge rd_clk) begin
if (!rd_reset_n) begin
rd_ptr_bin <= 0;
rd_ptr_gray <= 0;
wr_ptr_gray_sync0 <= 0;
wr_ptr_gray_sync1 <= 0;
rd_data_reg <= 0;
rd_valid_reg <= 0;
end else begin
// Synchronize write pointer into read domain
wr_ptr_gray_sync0 <= wr_ptr_gray;
wr_ptr_gray_sync1 <= wr_ptr_gray_sync0;
// Pop logic: present data when FIFO not empty
if (!rd_empty && (!rd_valid_reg || rd_ack)) begin
rd_data_reg <= mem[rd_ptr_bin[ADDR_BITS-1:0]];
rd_valid_reg <= 1'b1;
rd_ptr_bin <= rd_ptr_bin + 1;
rd_ptr_gray <= bin2gray(rd_ptr_bin + 1);
end else if (rd_valid_reg && rd_ack) begin
// Consumer took data but FIFO is empty now
rd_valid_reg <= 1'b0;
end
end
end
assign rd_data = rd_data_reg;
assign rd_valid = rd_valid_reg;
endmodule
// ============================================================================
// CDC FOR SINGLE BIT SIGNALS
// Uses synchronous reset on sync chain to avoid metastability on reset
9_Firmware/9_2_FPGA/constraints/README.md
+8 -7
View File
@@ -32,8 +32,8 @@ the `USB_MODE` parameter in `radar_system_top.v`:
| USB_MODE | Interface | Bus Width | Speed | Board Target |
|----------|-----------|-----------|-------|--------------|
| 0 (default) | FT601 (USB 3.0) | 32-bit | 100 MHz | 200T premium dev board |
| 1 | FT2232H (USB 2.0) | 8-bit | 60 MHz | 50T production board |
| 0 | FT601 (USB 3.0) | 32-bit | 100 MHz | 200T premium dev board |
| 1 (default) | FT2232H (USB 2.0) | 8-bit | 60 MHz | 50T production board |
### How USB_MODE Works
@@ -72,7 +72,8 @@ The parameter is set via a **wrapper module** that overrides the default:
```
- **200T dev board**: `radar_system_top` is used directly as the top module.
`USB_MODE` defaults to `0` (FT601). No wrapper needed.
`USB_MODE` defaults to `1` (FT2232H) since production is the primary target.
Override with `.USB_MODE(0)` for FT601 builds.
### RTL Files by USB Interface
@@ -158,7 +159,7 @@ The build scripts automatically select the correct top module and constraints:
You do NOT need to set `USB_MODE` manually. The top module selection handles it:
- `radar_system_top_50t` forces `USB_MODE=1` internally
- `radar_system_top` defaults to `USB_MODE=0`
- `radar_system_top` defaults to `USB_MODE=1` (FT2232H, production default)
## How to Select Constraints in Vivado
@@ -190,9 +191,9 @@ read_xdc constraints/te0713_te0701_minimal.xdc
| Target | Top module | USB_MODE | USB Interface | Notes |
|--------|------------|----------|---------------|-------|
| 50T Production (FTG256) | `radar_system_top_50t` | 1 | FT2232H (8-bit) | Wrapper sets USB_MODE=1, ties off FT601 |
| 200T Dev (FBG484) | `radar_system_top` | 0 (default) | FT601 (32-bit) | No wrapper needed |
| Trenz TE0712/TE0701 | `radar_system_top_te0712_dev` | 0 (default) | FT601 (32-bit) | Minimal bring-up wrapper |
| Trenz TE0713/TE0701 | `radar_system_top_te0713_dev` | 0 (default) | FT601 (32-bit) | Alternate SoM wrapper |
| 200T Dev (FBG484) | `radar_system_top` | 0 (override) | FT601 (32-bit) | Build script overrides default USB_MODE=1 |
| Trenz TE0712/TE0701 | `radar_system_top_te0712_dev` | 0 (override) | FT601 (32-bit) | Minimal bring-up wrapper |
| Trenz TE0713/TE0701 | `radar_system_top_te0713_dev` | 0 (override) | FT601 (32-bit) | Alternate SoM wrapper |
## Trenz Split Status
9_Firmware/9_2_FPGA/constraints/xc7a50t_ftg256.xdc
+47 -8
View File
@@ -70,9 +70,10 @@ set_input_jitter [get_clocks clk_100m] 0.1
# NOTE: The physical DAC (U3, AD9708) receives its clock directly from the
# AD9523 via a separate net (DAC_CLOCK), NOT from the FPGA. The FPGA
# uses this clock input for internal DAC data timing only. The RTL port
# `dac_clk` is an output that assigns clk_120m directly — it has no
# separate physical pin on this board and should be removed from the
# RTL or left unconnected.
# `dac_clk` is an RTL output that assigns clk_120m directly. It has no
# physical pin on the 50T board and is left unconnected here. The port
# CANNOT be removed from the RTL because the 200T board uses it with
# ODDR clock forwarding (pin H17, see xc7a200t_fbg484.xdc).
# FIX: Moved from C13 (IO_L12N = N-type) to D13 (IO_L12P = P-type MRCC).
# Clock inputs must use the P-type pin of an MRCC pair (PLIO-9 DRC).
set_property PACKAGE_PIN D13 [get_ports {clk_120m_dac}]
@@ -224,7 +225,7 @@ set_property IOSTANDARD LVCMOS33 [get_ports {stm32_mixers_enable}]
# DIG_5 = H11, DIG_6 = G12, DIG_7 = H12 — FPGA→STM32 status outputs
# DIG_5: AGC saturation flag (PD13 on STM32)
# DIG_6: reserved (PD14)
# DIG_6: AGC enable flag (PD14) — mirrors FPGA host_agc_enable to STM32
# DIG_7: reserved (PD15)
set_property PACKAGE_PIN H11 [get_ports {gpio_dig5}]
set_property PACKAGE_PIN G12 [get_ports {gpio_dig6}]
@@ -332,6 +333,44 @@ set_property DRIVE 8 [get_ports {ft_data[*]}]
# ft_clkout constrained above in CLOCK CONSTRAINTS section (C4, 60 MHz)
# --------------------------------------------------------------------------
# FT2232H Source-Synchronous Timing Constraints
# --------------------------------------------------------------------------
# FT2232H 245 Synchronous FIFO mode timing (60 MHz, period = 16.667 ns):
#
# FPGA Read Path (FT2232H drives data, FPGA samples):
# - Data valid before CLKOUT rising edge: t_vr(max) = 7.0 ns
# - Data hold after CLKOUT rising edge: t_hr(min) = 0.0 ns
# - Input delay max = period - t_vr = 16.667 - 7.0 = 9.667 ns
# - Input delay min = t_hr = 0.0 ns
#
# FPGA Write Path (FPGA drives data, FT2232H samples):
# - Data setup before next CLKOUT rising: t_su = 5.0 ns
# - Data hold after CLKOUT rising: t_hd = 0.0 ns
# - Output delay max = period - t_su = 16.667 - 5.0 = 11.667 ns
# - Output delay min = t_hd = 0.0 ns
# --------------------------------------------------------------------------
# Input delays: FT2232H → FPGA (data bus and status signals)
set_input_delay -clock [get_clocks ft_clkout] -max 9.667 [get_ports {ft_data[*]}]
set_input_delay -clock [get_clocks ft_clkout] -min 0.0 [get_ports {ft_data[*]}]
set_input_delay -clock [get_clocks ft_clkout] -max 9.667 [get_ports {ft_rxf_n}]
set_input_delay -clock [get_clocks ft_clkout] -min 0.0 [get_ports {ft_rxf_n}]
set_input_delay -clock [get_clocks ft_clkout] -max 9.667 [get_ports {ft_txe_n}]
set_input_delay -clock [get_clocks ft_clkout] -min 0.0 [get_ports {ft_txe_n}]
# Output delays: FPGA → FT2232H (control strobes and data bus when writing)
set_output_delay -clock [get_clocks ft_clkout] -max 11.667 [get_ports {ft_data[*]}]
set_output_delay -clock [get_clocks ft_clkout] -min 0.0 [get_ports {ft_data[*]}]
set_output_delay -clock [get_clocks ft_clkout] -max 11.667 [get_ports {ft_rd_n}]
set_output_delay -clock [get_clocks ft_clkout] -min 0.0 [get_ports {ft_rd_n}]
set_output_delay -clock [get_clocks ft_clkout] -max 11.667 [get_ports {ft_wr_n}]
set_output_delay -clock [get_clocks ft_clkout] -min 0.0 [get_ports {ft_wr_n}]
set_output_delay -clock [get_clocks ft_clkout] -max 11.667 [get_ports {ft_oe_n}]
set_output_delay -clock [get_clocks ft_clkout] -min 0.0 [get_ports {ft_oe_n}]
set_output_delay -clock [get_clocks ft_clkout] -max 11.667 [get_ports {ft_siwu}]
set_output_delay -clock [get_clocks ft_clkout] -min 0.0 [get_ports {ft_siwu}]
# ============================================================================
# STATUS / DEBUG OUTPUTS — NO PHYSICAL CONNECTIONS
# ============================================================================
@@ -418,10 +457,10 @@ set_property BITSTREAM.CONFIG.UNUSEDPIN Pullup [current_design]
# 4. JTAG: FPGA_TCK (L7), FPGA_TDI (N7), FPGA_TDO (N8), FPGA_TMS (M7).
# Dedicated pins — no XDC constraints needed.
#
# 5. dac_clk port: The RTL top module declares `dac_clk` as an output, but
# the physical board wires the DAC clock (AD9708 CLOCK pin) directly from
# the AD9523, not from the FPGA. This port should be removed from the RTL
# or left unconnected. It currently just assigns clk_120m_dac passthrough.
# 5. dac_clk port: Not connected on the 50T board (DAC clocked directly from
# AD9523). The RTL port exists for 200T board compatibility, where the FPGA
# forwards the DAC clock via ODDR to pin H17 with generated clock and
# timing constraints (see xc7a200t_fbg484.xdc). Do NOT remove from RTL.
#
# ============================================================================
# END OF CONSTRAINTS
9_Firmware/9_2_FPGA/ddc_400m.v
+28 -46
View File
@@ -584,59 +584,41 @@ cic_decimator_4x_enhanced cic_q_inst (
assign cic_valid = cic_valid_i & cic_valid_q;
// ============================================================================
// Clock Domain Crossing: 400 MHz CIC output → 100 MHz FIR input
// ============================================================================
// The CIC decimates 4:1, producing one sample per 4 clk_400m cycles (~100 MSPS).
// The FIR runs at clk_100m (100 MHz). The two clocks have unknown phase
// relationship, so a proper asynchronous FIFO with Gray-coded pointers is
// required. The old cdc_adc_to_processing module Gray-encoded the sample
// DATA which is invalid (Gray encoding only guarantees single-bit transitions
// for monotonically incrementing counters, not arbitrary sample values).
//
// Depth 8 provides margin: worst case, 2 samples can be in flight before
// the read side pops, well within a depth-8 budget.
// Enhanced FIR Filters with FIXED valid signal handling
// NOTE: Wire declarations moved BEFORE CDC instances to fix forward-reference
// error in Icarus Verilog (was originally after CDC instantiation)
// ============================================================================
wire fir_in_valid_i, fir_in_valid_q;
wire fir_valid_i, fir_valid_q;
wire fir_i_ready, fir_q_ready;
wire [17:0] fir_d_in_i, fir_d_in_q;
wire [17:0] fir_d_in_i, fir_d_in_q;
// I-channel CDC: async FIFO, 400 MHz write → 100 MHz read
cdc_async_fifo #(
.WIDTH(18),
.DEPTH(8),
.ADDR_BITS(3)
) CDC_FIR_i (
.wr_clk(clk_400m),
.wr_reset_n(reset_n_400m),
.wr_data(cic_i_out),
.wr_en(cic_valid_i),
.wr_full(), // At 1:1 data rate, overflow should not occur
.rd_clk(clk_100m),
.rd_reset_n(reset_n),
.rd_data(fir_d_in_i),
.rd_valid(fir_in_valid_i),
.rd_ack(fir_in_valid_i) // Auto-pop: consume every valid sample
cdc_adc_to_processing #(
.WIDTH(18),
.STAGES(3)
)CDC_FIR_i(
.src_clk(clk_400m),
.dst_clk(clk_100m),
.src_reset_n(reset_n_400m),
.dst_reset_n(reset_n),
.src_data(cic_i_out),
.src_valid(cic_valid_i),
.dst_data(fir_d_in_i),
.dst_valid(fir_in_valid_i)
);
// Q-channel CDC: async FIFO, 400 MHz write → 100 MHz read
cdc_async_fifo #(
.WIDTH(18),
.DEPTH(8),
.ADDR_BITS(3)
) CDC_FIR_q (
.wr_clk(clk_400m),
.wr_reset_n(reset_n_400m),
.wr_data(cic_q_out),
.wr_en(cic_valid_q),
.wr_full(),
.rd_clk(clk_100m),
.rd_reset_n(reset_n),
.rd_data(fir_d_in_q),
.rd_valid(fir_in_valid_q),
.rd_ack(fir_in_valid_q)
cdc_adc_to_processing #(
.WIDTH(18),
.STAGES(3)
)CDC_FIR_q(
.src_clk(clk_400m),
.dst_clk(clk_100m),
.src_reset_n(reset_n_400m),
.dst_reset_n(reset_n),
.src_data(cic_q_out),
.src_valid(cic_valid_q),
.dst_data(fir_d_in_q),
.dst_valid(fir_in_valid_q)
);
// ============================================================================
9_Firmware/9_2_FPGA/doppler_processor.v
+1 -18
View File
@@ -531,23 +531,6 @@ xfft_16 fft_inst (
// Status Outputs
// ==============================================
assign processing_active = (state != S_IDLE);
// frame_complete must be a single-cycle pulse, not a level.
// The AGC (rx_gain_control) uses this as frame_boundary to snapshot
// per-frame metrics and update gain. If held high continuously,
// the AGC would re-evaluate every clock with zeroed accumulators,
// collapsing saturation_count/peak_magnitude to zero.
//
// Detect the falling edge of processing_active: the exact clock
// when the Doppler processor finishes all sub-frame FFTs and
// returns to S_IDLE with the frame buffer drained.
reg processing_active_prev;
always @(posedge clk or negedge reset_n) begin
if (!reset_n)
processing_active_prev <= 1'b0;
else
processing_active_prev <= processing_active;
end
assign frame_complete = (~processing_active & processing_active_prev);
assign frame_complete = (state == S_IDLE && frame_buffer_full == 0);
endmodule
9_Firmware/9_2_FPGA/matched_filter_multi_segment.v
+11 -78
View File
@@ -77,7 +77,6 @@ reg signed [15:0] buf_rdata_i, buf_rdata_q;
// State machine
reg [3:0] state;
localparam ST_IDLE = 0;
localparam ST_WAIT_LISTEN = 9; // Wait for TX chirp to end before collecting
localparam ST_COLLECT_DATA = 1;
localparam ST_ZERO_PAD = 2;
localparam ST_WAIT_REF = 3;
@@ -99,22 +98,11 @@ reg signed [15:0] overlap_cache_i [0:OVERLAP_SAMPLES-1];
reg signed [15:0] overlap_cache_q [0:OVERLAP_SAMPLES-1];
reg [7:0] overlap_copy_count;
// Listen-window delay counter: skip TX chirp duration before collecting echoes.
// The chirp_start_pulse fires at the beginning of TX, but the matched filter
// must collect receive-window samples (echoes), not TX leakage.
// For long chirp: skip LONG_CHIRP_SAMPLES (3000) ddc_valid counts
// For short chirp: skip SHORT_CHIRP_SAMPLES (50) ddc_valid counts
reg [15:0] listen_delay_count;
reg [15:0] listen_delay_target;
// Microcontroller sync detection
// mc_new_chirp/elevation/azimuth are TOGGLE signals from radar_mode_controller:
// they invert on every event. Detect ANY transition (XOR with previous value),
// not just rising edge, otherwise every other chirp/elevation/azimuth is missed.
reg mc_new_chirp_prev, mc_new_elevation_prev, mc_new_azimuth_prev;
wire chirp_start_pulse = mc_new_chirp ^ mc_new_chirp_prev;
wire elevation_change_pulse = mc_new_elevation ^ mc_new_elevation_prev;
wire azimuth_change_pulse = mc_new_azimuth ^ mc_new_azimuth_prev;
wire chirp_start_pulse = mc_new_chirp && !mc_new_chirp_prev;
wire elevation_change_pulse = mc_new_elevation && !mc_new_elevation_prev;
wire azimuth_change_pulse = mc_new_azimuth && !mc_new_azimuth_prev;
// Processing chain signals
wire [15:0] fft_pc_i, fft_pc_q;
@@ -196,8 +184,6 @@ always @(posedge clk or negedge reset_n) begin
buf_wdata_q <= 0;
buf_raddr <= 0;
overlap_copy_count <= 0;
listen_delay_count <= 0;
listen_delay_target <= 0;
end else begin
pc_valid <= 0;
mem_request <= 0;
@@ -219,45 +205,19 @@ always @(posedge clk or negedge reset_n) begin
// Wait for chirp start from microcontroller
if (chirp_start_pulse) begin
state <= ST_COLLECT_DATA;
total_segments <= use_long_chirp ? LONG_SEGMENTS[2:0] : SHORT_SEGMENTS[2:0];
// Delay collection until the listen window opens.
// chirp_start_pulse fires at TX start; echoes only arrive
// after the chirp finishes. Skip the TX duration by
// counting ddc_valid pulses before entering ST_COLLECT_DATA.
listen_delay_count <= 0;
listen_delay_target <= use_long_chirp ? LONG_CHIRP_SAMPLES[15:0]
: SHORT_CHIRP_SAMPLES[15:0];
state <= ST_WAIT_LISTEN;
`ifdef SIMULATION
$display("[MULTI_SEG_FIXED] Chirp start detected, waiting for listen window (%0d samples)",
use_long_chirp ? LONG_CHIRP_SAMPLES : SHORT_CHIRP_SAMPLES);
$display("[MULTI_SEG_FIXED] Starting %s chirp, segments: %d",
use_long_chirp ? "LONG" : "SHORT",
use_long_chirp ? LONG_SEGMENTS : SHORT_SEGMENTS);
$display("[MULTI_SEG_FIXED] Overlap: %d samples, Advance: %d samples",
OVERLAP_SAMPLES, SEGMENT_ADVANCE);
`endif
end
end
ST_WAIT_LISTEN: begin
// Skip TX chirp duration — count ddc_valid pulses until the
// listen window opens. This ensures we only collect echo data,
// not TX leakage or dead time.
if (ddc_valid) begin
if (listen_delay_count >= listen_delay_target - 1) begin
// Listen window is now open — begin data collection
state <= ST_COLLECT_DATA;
`ifdef SIMULATION
$display("[MULTI_SEG_FIXED] Listen window open after %0d TX samples, starting %s chirp collection",
listen_delay_count + 1,
use_long_chirp ? "LONG" : "SHORT");
$display("[MULTI_SEG_FIXED] Overlap: %d samples, Advance: %d samples",
OVERLAP_SAMPLES, SEGMENT_ADVANCE);
`endif
end else begin
listen_delay_count <= listen_delay_count + 1;
end
end
end
ST_COLLECT_DATA: begin
// Collect samples for current segment with overlap-save
if (ddc_valid && buffer_write_ptr < BUFFER_SIZE) begin
@@ -574,36 +534,9 @@ always @(posedge clk or negedge reset_n) begin
end
`endif
// ========== OUTPUT CONNECTIONS — OVERLAP-SAVE TRIM ==========
// In overlap-save processing, the first OVERLAP_SAMPLES (128) output bins
// of each segment after segment 0 are corrupted by circular convolution
// wrap-around. These must be discarded. Only the SEGMENT_ADVANCE (896)
// valid bins per segment are forwarded downstream.
//
// For segment 0: all 1024 output bins are valid (no prior overlap).
// For segments 1+: bins [0..127] are artifacts, bins [128..1023] are valid.
//
// We count fft_pc_valid pulses per segment and suppress output during
// the overlap region.
reg [10:0] output_bin_count;
wire output_in_overlap = (current_segment != 0) &&
(output_bin_count < OVERLAP_SAMPLES);
always @(posedge clk or negedge reset_n) begin
if (!reset_n) begin
output_bin_count <= 0;
end else begin
if (state == ST_PROCESSING && buffer_read_ptr == 0) begin
// Reset counter at start of each segment's processing
output_bin_count <= 0;
end else if (fft_pc_valid) begin
output_bin_count <= output_bin_count + 1;
end
end
end
// ========== OUTPUT CONNECTIONS ==========
assign pc_i_w = fft_pc_i;
assign pc_q_w = fft_pc_q;
assign pc_valid_w = fft_pc_valid & ~output_in_overlap;
assign pc_valid_w = fft_pc_valid;
endmodule
9_Firmware/9_2_FPGA/radar_system_top.v
+6 -4
View File
@@ -130,7 +130,7 @@ module radar_system_top (
// FPGA→STM32 GPIO outputs (DIG_5..DIG_7 on 50T board)
// Used by STM32 outer AGC loop to read saturation state without USB polling.
output wire gpio_dig5, // DIG_5 (H11→PD13): AGC saturation flag (1=clipping detected)
output wire gpio_dig6, // DIG_6 (G12→PD14): reserved (tied low)
output wire gpio_dig6, // DIG_6 (G12→PD14): AGC enable flag (mirrors host_agc_enable)
output wire gpio_dig7 // DIG_7 (H12→PD15): reserved (tied low)
);
@@ -142,7 +142,7 @@ module radar_system_top (
parameter USE_LONG_CHIRP = 1'b1; // Default to long chirp
parameter DOPPLER_ENABLE = 1'b1; // Enable Doppler processing
parameter USB_ENABLE = 1'b1; // Enable USB data transfer
parameter USB_MODE = 0; // 0=FT601 (32-bit, 200T), 1=FT2232H (8-bit, 50T)
parameter USB_MODE = 1; // 0=FT601 (32-bit, 200T), 1=FT2232H (8-bit, 50T production default)
// ============================================================================
// INTERNAL SIGNALS
@@ -1037,9 +1037,11 @@ assign system_status = status_reg;
// ============================================================================
// DIG_5: AGC saturation flag — high when per-frame saturation_count > 0.
// STM32 reads PD13 to detect clipping and adjust ADAR1000 VGA gain.
// DIG_6, DIG_7: Reserved (tied low for future use).
// DIG_6: AGC enable flag — mirrors host_agc_enable so STM32 outer-loop AGC
// tracks the FPGA register as single source of truth.
// DIG_7: Reserved (tied low for future use).
assign gpio_dig5 = (rx_agc_saturation_count != 8'd0);
assign gpio_dig6 = 1'b0;
assign gpio_dig6 = host_agc_enable;
assign gpio_dig7 = 1'b0;
// ============================================================================
9_Firmware/9_2_FPGA/radar_system_top_te0713_umft601x_dev.v
+6 -1
View File
@@ -138,7 +138,12 @@ usb_data_interface usb_inst (
.status_range_mode(2'b01),
.status_self_test_flags(5'b11111),
.status_self_test_detail(8'hA5),
.status_self_test_busy(1'b0)
.status_self_test_busy(1'b0),
// AGC status: tie off with benign defaults (no AGC on dev board)
.status_agc_current_gain(4'd0),
.status_agc_peak_magnitude(8'd0),
.status_agc_saturation_count(8'd0),
.status_agc_enable(1'b0)
);
endmodule
9_Firmware/9_2_FPGA/run_regression.sh
+47 -76
View File
@@ -70,6 +70,7 @@ PROD_RTL=(
xfft_16.v
fft_engine.v
usb_data_interface.v
usb_data_interface_ft2232h.v
edge_detector.v
radar_mode_controller.v
rx_gain_control.v
@@ -86,6 +87,33 @@ EXTRA_RTL=(
frequency_matched_filter.v
)
# ---------------------------------------------------------------------------
# Shared RTL file lists for integration / system tests
# Centralised here so a new module only needs adding once.
# ---------------------------------------------------------------------------
# Receiver chain (used by golden generate/compare tests)
RECEIVER_RTL=(
radar_receiver_final.v
radar_mode_controller.v
tb/ad9484_interface_400m_stub.v
ddc_400m.v nco_400m_enhanced.v cic_decimator_4x_enhanced.v
cdc_modules.v fir_lowpass.v ddc_input_interface.v
chirp_memory_loader_param.v latency_buffer.v
matched_filter_multi_segment.v matched_filter_processing_chain.v
range_bin_decimator.v doppler_processor.v xfft_16.v fft_engine.v
rx_gain_control.v mti_canceller.v
)
# Full system top (receiver chain + TX + USB + detection + self-test)
SYSTEM_RTL=(
radar_system_top.v
radar_transmitter.v dac_interface_single.v plfm_chirp_controller.v
"${RECEIVER_RTL[@]}"
usb_data_interface.v usb_data_interface_ft2232h.v edge_detector.v
cfar_ca.v fpga_self_test.v
)
# ---- Layer A: iverilog -Wall compilation ----
run_lint_iverilog() {
local label="$1"
@@ -219,26 +247,9 @@ run_lint_static() {
fi
done
# --- Single-line regex checks across all production RTL ---
for f in "$@"; do
[[ -f "$f" ]] || continue
case "$f" in tb/*) continue ;; esac
local linenum=0
while IFS= read -r line; do
linenum=$((linenum + 1))
# CHECK 5: $readmemh / $readmemb in synthesizable code
# (Only valid in simulation blocks — flag if outside `ifdef SIMULATION)
# This is hard to check line-by-line without tracking ifdefs.
# Skip for v1.
# CHECK 6: Unused `include files (informational only)
# Skip for v1.
: # placeholder — prevents empty loop body
done < "$f"
done
# CHECK 5 ($readmemh in synth code) and CHECK 6 (unused includes)
# require multi-line ifdef tracking / cross-file analysis. Not feasible
# with line-by-line regex. Omitted — use Vivado lint instead.
if [[ "$err_count" -gt 0 ]]; then
echo -e "${RED}FAIL${NC} ($err_count errors, $warn_count warnings)"
@@ -420,57 +431,36 @@ if [[ "$QUICK" -eq 0 ]]; then
run_test "Receiver (golden generate)" \
tb/tb_rx_golden_reg.vvp \
-DGOLDEN_GENERATE \
tb/tb_radar_receiver_final.v radar_receiver_final.v \
radar_mode_controller.v tb/ad9484_interface_400m_stub.v \
ddc_400m.v nco_400m_enhanced.v cic_decimator_4x_enhanced.v \
cdc_modules.v fir_lowpass.v ddc_input_interface.v \
chirp_memory_loader_param.v latency_buffer.v \
matched_filter_multi_segment.v matched_filter_processing_chain.v \
range_bin_decimator.v doppler_processor.v xfft_16.v fft_engine.v \
rx_gain_control.v mti_canceller.v
tb/tb_radar_receiver_final.v "${RECEIVER_RTL[@]}"
# Golden compare
run_test "Receiver (golden compare)" \
tb/tb_rx_compare_reg.vvp \
tb/tb_radar_receiver_final.v radar_receiver_final.v \
radar_mode_controller.v tb/ad9484_interface_400m_stub.v \
ddc_400m.v nco_400m_enhanced.v cic_decimator_4x_enhanced.v \
cdc_modules.v fir_lowpass.v ddc_input_interface.v \
chirp_memory_loader_param.v latency_buffer.v \
matched_filter_multi_segment.v matched_filter_processing_chain.v \
range_bin_decimator.v doppler_processor.v xfft_16.v fft_engine.v \
rx_gain_control.v mti_canceller.v
tb/tb_radar_receiver_final.v "${RECEIVER_RTL[@]}"
# Full system top (monitoring-only, legacy)
run_test "System Top (radar_system_tb)" \
tb/tb_system_reg.vvp \
tb/radar_system_tb.v radar_system_top.v \
radar_transmitter.v dac_interface_single.v plfm_chirp_controller.v \
radar_receiver_final.v tb/ad9484_interface_400m_stub.v \
ddc_400m.v nco_400m_enhanced.v cic_decimator_4x_enhanced.v \
cdc_modules.v fir_lowpass.v ddc_input_interface.v \
chirp_memory_loader_param.v latency_buffer.v \
matched_filter_multi_segment.v matched_filter_processing_chain.v \
range_bin_decimator.v doppler_processor.v xfft_16.v fft_engine.v \
usb_data_interface.v edge_detector.v radar_mode_controller.v \
rx_gain_control.v cfar_ca.v mti_canceller.v fpga_self_test.v
tb/radar_system_tb.v "${SYSTEM_RTL[@]}"
# E2E integration (46 strict checks: TX, RX, USB R/W, CDC, safety, reset)
run_test "System E2E (tb_system_e2e)" \
tb/tb_system_e2e_reg.vvp \
tb/tb_system_e2e.v radar_system_top.v \
radar_transmitter.v dac_interface_single.v plfm_chirp_controller.v \
radar_receiver_final.v tb/ad9484_interface_400m_stub.v \
ddc_400m.v nco_400m_enhanced.v cic_decimator_4x_enhanced.v \
cdc_modules.v fir_lowpass.v ddc_input_interface.v \
chirp_memory_loader_param.v latency_buffer.v \
matched_filter_multi_segment.v matched_filter_processing_chain.v \
range_bin_decimator.v doppler_processor.v xfft_16.v fft_engine.v \
usb_data_interface.v edge_detector.v radar_mode_controller.v \
rx_gain_control.v cfar_ca.v mti_canceller.v fpga_self_test.v
tb/tb_system_e2e.v "${SYSTEM_RTL[@]}"
# USB_MODE=1 (FT2232H production) variants of system tests
run_test "System Top USB_MODE=1 (FT2232H)" \
tb/tb_system_ft2232h_reg.vvp \
-DUSB_MODE_1 \
tb/radar_system_tb.v "${SYSTEM_RTL[@]}"
run_test "System E2E USB_MODE=1 (FT2232H)" \
tb/tb_system_e2e_ft2232h_reg.vvp \
-DUSB_MODE_1 \
tb/tb_system_e2e.v "${SYSTEM_RTL[@]}"
else
echo " (skipped receiver golden + system top + E2E — use without --quick)"
SKIP=$((SKIP + 4))
SKIP=$((SKIP + 6))
fi
echo ""
@@ -526,25 +516,6 @@ run_test "Radar Mode Controller" \
echo ""
# ===========================================================================
# PHASE 5: P0 ADVERSARIAL TESTS — Invariant Violation Fixes
# ===========================================================================
echo "--- PHASE 5: P0 Adversarial Tests ---"
run_test "P0 Fix #1: Async FIFO CDC (show-ahead, overflow, reset)" \
tb/tb_p0_async_fifo.vvp \
tb/tb_p0_async_fifo.v cdc_modules.v
run_test "P0 Fixes #2/#3/#4: Matched Filter (toggle, listen, overlap)" \
tb/tb_p0_mf_adversarial.vvp \
tb/tb_p0_mf_adversarial.v matched_filter_multi_segment.v
run_test "P0 Fix #7: Frame Complete Pulse (falling-edge)" \
tb/tb_p0_frame_pulse.vvp \
tb/tb_p0_frame_pulse.v
echo ""
# ===========================================================================
# SUMMARY
# ===========================================================================
9_Firmware/9_2_FPGA/scripts/200t/build_200t.tcl
+3
View File
@@ -108,6 +108,9 @@ add_files -fileset constrs_1 -norecurse [file join $project_root "constraints" "
set_property top $top_module [current_fileset]
set_property verilog_define {FFT_XPM_BRAM} [current_fileset]
# Override USB_MODE to 0 (FT601) for 200T premium board.
# The RTL default is USB_MODE=1 (FT2232H, production 50T).
set_property generic {USB_MODE=0} [current_fileset]
# ==============================================================================
# 2. Synthesis
9_Firmware/9_2_FPGA/tb/cosim/rx_final_doppler_out.csv
+2048 -2048
View File
File diff suppressed because it is too large Load Diff
9_Firmware/9_2_FPGA/tb/golden/golden_doppler.mem
+2135 -2135
View File
File diff suppressed because it is too large Load Diff
9_Firmware/9_2_FPGA/tb/radar_system_tb.v
+11 -1
View File
@@ -430,7 +430,13 @@ end
// DUT INSTANTIATION
// ============================================================================
radar_system_top dut (
radar_system_top #(
`ifdef USB_MODE_1
.USB_MODE(1) // FT2232H interface (production 50T board)
`else
.USB_MODE(0) // FT601 interface (200T dev board)
`endif
) dut (
// System Clocks
.clk_100m(clk_100m),
.clk_120m_dac(clk_120m_dac),
@@ -619,7 +625,11 @@ initial begin
// Optional: dump specific signals for debugging
$dumpvars(1, dut.tx_inst);
$dumpvars(1, dut.rx_inst);
`ifdef USB_MODE_1
$dumpvars(1, dut.gen_ft2232h.usb_inst);
`else
$dumpvars(1, dut.gen_ft601.usb_inst);
`endif
end
endmodule
9_Firmware/9_2_FPGA/tb/tb_p0_async_fifo.v
-558
View File
@@ -1,558 +0,0 @@
`timescale 1ns / 1ps
// ============================================================================
// ADVERSARIAL TESTBENCH: cdc_async_fifo (P0 Fix #1)
// ============================================================================
// Actively tries to BREAK the async FIFO that replaced the flawed
// Gray-encoded CDC for the DDC 400→100 MHz sample path.
//
// Attack vectors:
// 1. Read on empty FIFO — no spurious rd_valid
// 2. Single write/read — basic data integrity
// 3. Fill to capacity — wr_full asserts correctly
// 4. Overflow — write-when-full must be rejected, no corruption
// 5. Ordered streaming — FIFO order preserved under sustained load
// 6. Reset mid-transfer — clean recovery, no stale data
// 7. Burst writes at max wr_clk rate — stress back-pressure
// 8. wr_full deasserts promptly after read
// 9. Alternating single-entry traffic — throughput = 1
// 10. Pathological data patterns — all-ones, alternating bits
// ============================================================================
module tb_p0_async_fifo;
localparam WR_PERIOD = 2.5; // 400 MHz source clock
localparam RD_PERIOD = 10.0; // 100 MHz destination clock
localparam WIDTH = 18;
localparam DEPTH = 8;
// ── Test bookkeeping ─────────────────────────────────────
integer pass_count = 0;
integer fail_count = 0;
integer test_num = 0;
integer i, j;
task check;
input cond;
input [511:0] label;
begin
test_num = test_num + 1;
if (cond) begin
$display("[PASS] Test %0d: %0s", test_num, label);
pass_count = pass_count + 1;
end else begin
$display("[FAIL] Test %0d: %0s", test_num, label);
fail_count = fail_count + 1;
end
end
endtask
// ── DUT signals ──────────────────────────────────────────
reg wr_clk = 0;
reg rd_clk = 0;
reg wr_reset_n = 0;
reg rd_reset_n = 0;
reg [WIDTH-1:0] wr_data = 0;
reg wr_en = 0;
wire wr_full;
wire [WIDTH-1:0] rd_data;
wire rd_valid;
reg rd_ack = 0;
always #(WR_PERIOD/2) wr_clk = ~wr_clk;
always #(RD_PERIOD/2) rd_clk = ~rd_clk;
cdc_async_fifo #(
.WIDTH(WIDTH), .DEPTH(DEPTH), .ADDR_BITS(3)
) dut (
.wr_clk(wr_clk), .wr_reset_n(wr_reset_n),
.wr_data(wr_data), .wr_en(wr_en), .wr_full(wr_full),
.rd_clk(rd_clk), .rd_reset_n(rd_reset_n),
.rd_data(rd_data), .rd_valid(rd_valid), .rd_ack(rd_ack)
);
// ── Helper tasks ─────────────────────────────────────────
task do_reset;
begin
wr_en = 0; rd_ack = 0; wr_data = 0;
wr_reset_n = 0; rd_reset_n = 0;
#100;
wr_reset_n = 1; rd_reset_n = 1;
#50;
end
endtask
task wait_wr_n;
input integer n;
integer k;
begin
for (k = 0; k < n; k = k + 1) @(posedge wr_clk);
end
endtask
task wait_rd_n;
input integer n;
integer k;
begin
for (k = 0; k < n; k = k + 1) @(posedge rd_clk);
end
endtask
// ── Read one entry with timeout ──────────────────────────
reg [WIDTH-1:0] read_result;
reg read_ok;
task read_one;
output [WIDTH-1:0] data_out;
output valid_out;
integer timeout;
begin
rd_ack = 1;
valid_out = 0;
data_out = {WIDTH{1'bx}};
for (timeout = 0; timeout < 20; timeout = timeout + 1) begin
@(posedge rd_clk);
if (rd_valid) begin
data_out = rd_data;
valid_out = 1;
timeout = 999; // break
end
end
@(posedge rd_clk);
rd_ack = 0;
end
endtask
// ── Drain FIFO, return count of entries read ─────────────
integer drain_count;
reg [WIDTH-1:0] drain_buf [0:15];
task drain_fifo;
output integer count;
integer t;
begin
count = 0;
rd_ack = 1;
for (t = 0; t < 60; t = t + 1) begin
@(posedge rd_clk);
if (rd_valid && count < 16) begin
drain_buf[count] = rd_data;
count = count + 1;
end
end
rd_ack = 0;
wait_rd_n(3);
end
endtask
// ══════════════════════════════════════════════════════════
// MAIN TEST SEQUENCE
// ══════════════════════════════════════════════════════════
initial begin
$dumpfile("tb_p0_async_fifo.vcd");
$dumpvars(0, tb_p0_async_fifo);
do_reset;
// ──────────────────────────────────────────────────────
// GROUP 1: Empty FIFO — no spurious rd_valid
// ──────────────────────────────────────────────────────
$display("\n=== GROUP 1: Empty FIFO behavior ===");
// 1a: rd_valid must be 0 when nothing written
wait_rd_n(10);
check(rd_valid == 0, "Empty FIFO: rd_valid is 0 (no writes)");
// 1b: rd_ack on empty must not produce spurious valid
rd_ack = 1;
wait_rd_n(10);
check(rd_valid == 0, "Empty FIFO: rd_ack on empty produces no valid");
rd_ack = 0;
wait_rd_n(3);
// ──────────────────────────────────────────────────────
// GROUP 2: Single write/read
// ──────────────────────────────────────────────────────
$display("\n=== GROUP 2: Single write/read ===");
@(posedge wr_clk); #1;
wr_data = 18'h2ABCD;
wr_en = 1;
@(posedge wr_clk); #1;
wr_en = 0;
// Wait for CDC propagation
wait_rd_n(6);
check(rd_valid == 1, "Single write: rd_valid asserted");
check(rd_data == 18'h2ABCD, "Single write: data integrity");
// ACK and verify deassert
#1; rd_ack = 1;
@(posedge rd_clk); #1;
rd_ack = 0;
wait_rd_n(6);
check(rd_valid == 0, "Single write: rd_valid deasserts after ack+empty");
// ──────────────────────────────────────────────────────
// GROUP 3: Fill to capacity
// ──────────────────────────────────────────────────────
// NOTE: This FIFO uses a pre-fetch show-ahead architecture.
// When the FIFO goes from empty to non-empty, the read domain
// auto-presents the first entry into rd_data_reg, advancing
// rd_ptr by 1. This frees one slot in the underlying memory,
// so wr_full requires DEPTH+1 writes (DEPTH in mem + 1 in the
// output register). This is necessary because a combinational
// read from mem across clock domains would be CDC-unsafe.
$display("\n=== GROUP 3: Fill to capacity ===");
do_reset;
// Write DEPTH entries
for (i = 0; i < DEPTH; i = i + 1) begin
@(posedge wr_clk); #1;
wr_data = i[17:0] + 18'h100;
wr_en = 1;
end
@(posedge wr_clk); #1;
wr_en = 0;
// Wait for auto-present round-trip through both synchronizers
wait_wr_n(12);
// After auto-present, rd_ptr advanced by 1 → 1 slot freed → not full yet
check(wr_full == 0, "Pre-fetch show-ahead: DEPTH writes, 1 auto-present frees slot");
// Write one more entry into the freed slot → now truly full
@(posedge wr_clk); #1;
wr_data = 18'hFACE;
wr_en = 1;
@(posedge wr_clk); #1;
wr_en = 0;
wait_wr_n(6);
check(wr_full == 1, "Fill-to-full: wr_full asserted after DEPTH+1 writes");
// ──────────────────────────────────────────────────────
// GROUP 4: Overflow — write when full
// ──────────────────────────────────────────────────────
$display("\n=== GROUP 4: Overflow protection ===");
// Attempt to write 3 more entries while full
for (i = 0; i < 3; i = i + 1) begin
@(posedge wr_clk); #1;
wr_data = 18'h3DEAD + i[17:0];
wr_en = 1;
end
@(posedge wr_clk); #1;
wr_en = 0;
// Drain and verify DEPTH+1 entries (DEPTH mem + 1 output register)
drain_fifo(drain_count);
check(drain_count == DEPTH + 1, "Overflow: exactly DEPTH+1 entries (overflow rejected)");
// Verify data integrity — check first DEPTH entries + the extra FACE entry
begin : overflow_data_check
reg data_ok;
data_ok = 1;
// First entry is the auto-presented one (index 0 from Group 3)
if (drain_buf[0] !== 18'h100) begin
$display(" overflow corruption at [0]: expected %h, got %h",
18'h100, drain_buf[0]);
data_ok = 0;
end
// Next DEPTH-1 entries are indices 1..DEPTH-1
for (i = 1; i < DEPTH; i = i + 1) begin
if (drain_buf[i] !== i[17:0] + 18'h100) begin
$display(" overflow corruption at [%0d]: expected %h, got %h",
i, i[17:0] + 18'h100, drain_buf[i]);
data_ok = 0;
end
end
// Last entry is the FACE entry from the +1 write
if (drain_buf[DEPTH] !== 18'hFACE) begin
$display(" overflow corruption at [%0d]: expected %h, got %h",
DEPTH, 18'hFACE, drain_buf[DEPTH]);
data_ok = 0;
end
check(data_ok, "Overflow: all DEPTH+1 entries data intact (no corruption)");
end
// ──────────────────────────────────────────────────────
// GROUP 5: Data ordering under sustained streaming
// ──────────────────────────────────────────────────────
$display("\n=== GROUP 5: Sustained streaming order ===");
do_reset;
// Simulate CIC-decimated DDC output: 1 sample per 4 wr_clks
// Reader continuously ACKs (rate-matched at 100 MHz)
begin : stream_test
reg [WIDTH-1:0] expected_val;
integer read_idx;
reg ordering_ok;
ordering_ok = 1;
read_idx = 0;
fork
// Writer: 32 samples, 1 per 4 wr_clks (rate-matched to rd_clk)
begin : stream_writer
integer w;
for (w = 0; w < 32; w = w + 1) begin
@(posedge wr_clk); #1;
wr_data = w[17:0] + 18'h1000;
wr_en = 1;
@(posedge wr_clk); #1;
wr_en = 0;
wait_wr_n(2); // 4 wr_clks total per sample
end
end
// Reader: continuously consume at rd_clk rate
begin : stream_reader
integer rd_t;
rd_ack = 1;
for (rd_t = 0; rd_t < 500 && read_idx < 32; rd_t = rd_t + 1) begin
@(posedge rd_clk);
if (rd_valid) begin
expected_val = read_idx[17:0] + 18'h1000;
if (rd_data !== expected_val) begin
$display(" stream order error at [%0d]: expected %h, got %h",
read_idx, expected_val, rd_data);
ordering_ok = 0;
end
read_idx = read_idx + 1;
end
end
#1; rd_ack = 0;
end
join
check(read_idx == 32, "Streaming: all 32 samples received");
check(ordering_ok, "Streaming: FIFO order preserved");
end
// ──────────────────────────────────────────────────────
// GROUP 6: Reset mid-transfer
// ──────────────────────────────────────────────────────
$display("\n=== GROUP 6: Reset mid-transfer ===");
do_reset;
// Write 4 entries
for (i = 0; i < 4; i = i + 1) begin
@(posedge wr_clk); #1;
wr_data = i[17:0] + 18'hAA00;
wr_en = 1;
end
@(posedge wr_clk); #1;
wr_en = 0;
wait_wr_n(3);
// Assert reset while data is in FIFO
wr_reset_n = 0; rd_reset_n = 0;
#50;
wr_reset_n = 1; rd_reset_n = 1;
#50;
// 6a: FIFO must be empty after reset
wait_rd_n(10);
check(rd_valid == 0, "Reset mid-xfer: FIFO empty (no stale data)");
check(wr_full == 0, "Reset mid-xfer: wr_full deasserted");
// 6b: New write after reset must work
@(posedge wr_clk); #1;
wr_data = 18'h3CAFE;
wr_en = 1;
@(posedge wr_clk); #1;
wr_en = 0;
wait_rd_n(6);
check(rd_valid == 1, "Reset recovery: rd_valid for new write");
check(rd_data == 18'h3CAFE, "Reset recovery: correct data");
#1; rd_ack = 1; @(posedge rd_clk); #1; rd_ack = 0;
wait_rd_n(5);
// ──────────────────────────────────────────────────────
// GROUP 7: Burst writes at max wr_clk rate
// ──────────────────────────────────────────────────────
$display("\n=== GROUP 7: Max-rate burst ===");
do_reset;
// Write 7 entries back-to-back (1 per wr_clk, no decimation)
for (i = 0; i < 7; i = i + 1) begin
@(posedge wr_clk); #1;
wr_data = i[17:0] + 18'hB000;
wr_en = 1;
end
@(posedge wr_clk); #1;
wr_en = 0;
// Drain and count
drain_fifo(drain_count);
check(drain_count == 7, "Burst: all 7 entries received (no drops)");
// ──────────────────────────────────────────────────────
// GROUP 8: wr_full deasserts after read
// ──────────────────────────────────────────────────────
$display("\n=== GROUP 8: wr_full release ===");
do_reset;
// Fill FIFO: DEPTH entries first
for (i = 0; i < DEPTH; i = i + 1) begin
@(posedge wr_clk); #1;
wr_data = i[17:0];
wr_en = 1;
end
@(posedge wr_clk); #1;
wr_en = 0;
// Wait for auto-present round-trip
wait_wr_n(12);
// Write the +1 entry (into the slot freed by auto-present)
@(posedge wr_clk); #1;
wr_data = 18'h3BEEF;
wr_en = 1;
@(posedge wr_clk); #1;
wr_en = 0;
wait_wr_n(6);
check(wr_full == 1, "wr_full release: initially full (DEPTH+1 writes)");
// Read one entry (ACK the auto-presented data)
#1; rd_ack = 1;
wait_rd_n(2);
#1; rd_ack = 0;
// Wait for rd_ptr sync back to wr domain (2 wr_clk cycles + margin)
wait_wr_n(10);
check(wr_full == 0, "wr_full release: deasserts after 1 read");
// Drain rest
drain_fifo(drain_count);
wait_rd_n(5);
// ──────────────────────────────────────────────────────
// GROUP 9: Alternating single-entry throughput
// ──────────────────────────────────────────────────────
$display("\n=== GROUP 9: Alternating single-entry ===");
do_reset;
begin : alt_test
reg alt_ok;
reg alt_got_valid;
integer rd_w;
alt_ok = 1;
for (i = 0; i < 12; i = i + 1) begin
// Write 1
@(posedge wr_clk); #1;
wr_data = i[17:0] + 18'hC000;
wr_en = 1;
@(posedge wr_clk); #1;
wr_en = 0;
// Read 1 — wait for auto-present with rd_ack=0, then pulse ack
rd_ack = 0;
alt_got_valid = 0;
for (rd_w = 0; rd_w < 20; rd_w = rd_w + 1) begin
@(posedge rd_clk);
if (rd_valid && !alt_got_valid) begin
alt_got_valid = 1;
if (rd_data !== i[17:0] + 18'hC000) begin
$display(" alt[%0d]: data mismatch", i);
alt_ok = 0;
end
rd_w = 999; // break
end
end
if (!alt_got_valid) begin
$display(" alt[%0d]: no rd_valid after write", i);
alt_ok = 0;
end
// Consume the entry
#1; rd_ack = 1;
@(posedge rd_clk); #1;
rd_ack = 0;
wait_rd_n(2);
end
check(alt_ok, "Alternating: 12 single-entry cycles all correct");
end
// ──────────────────────────────────────────────────────
// GROUP 10: Pathological data patterns
// ──────────────────────────────────────────────────────
$display("\n=== GROUP 10: Pathological data patterns ===");
do_reset;
begin : patho_test
reg patho_ok;
reg patho_seen;
reg [WIDTH-1:0] patterns [0:4];
integer rd_w;
patterns[0] = 18'h3FFFF; // all ones
patterns[1] = 18'h00000; // all zeros
patterns[2] = 18'h2AAAA; // alternating 10...
patterns[3] = 18'h15555; // alternating 01...
patterns[4] = 18'h20001; // MSB + LSB set
patho_ok = 1;
// Write all 5 patterns
for (i = 0; i < 5; i = i + 1) begin
@(posedge wr_clk); #1;
wr_data = patterns[i];
wr_en = 1;
end
@(posedge wr_clk); #1;
wr_en = 0;
// Read one at a time: wait for auto-present, check, ack
rd_ack = 0;
for (i = 0; i < 5; i = i + 1) begin
patho_seen = 0;
for (rd_w = 0; rd_w < 30; rd_w = rd_w + 1) begin
@(posedge rd_clk);
if (rd_valid && !patho_seen) begin
patho_seen = 1;
if (rd_data !== patterns[i]) begin
$display(" pattern[%0d]: expected %h got %h",
i, patterns[i], rd_data);
patho_ok = 0;
end
rd_w = 999; // break
end
end
if (!patho_seen) begin
$display(" pattern[%0d]: no valid", i);
patho_ok = 0;
end
// Consume the entry
#1; rd_ack = 1;
@(posedge rd_clk); #1;
rd_ack = 0;
end
check(patho_ok, "Pathological: all 5 bit-patterns survive CDC");
end
// ══════════════════════════════════════════════════════
// SUMMARY
// ══════════════════════════════════════════════════════
$display("\n============================================");
$display(" P0 Fix #1: Async FIFO Adversarial Tests");
$display("============================================");
$display(" PASSED: %0d", pass_count);
$display(" FAILED: %0d", fail_count);
$display("============================================");
if (fail_count > 0)
$display("RESULT: FAIL");
else
$display("RESULT: PASS");
$finish;
end
// Timeout watchdog
initial begin
#1000000;
$display("[FAIL] TIMEOUT: simulation exceeded 1ms");
$finish;
end
endmodule
9_Firmware/9_2_FPGA/tb/tb_p0_frame_pulse.v
-361
View File
@@ -1,361 +0,0 @@
`timescale 1ns / 1ps
// ============================================================================
// ADVERSARIAL TESTBENCH: frame_complete Pulse Width (P0 Fix #7)
// ============================================================================
// Tests the falling-edge pulse detection pattern used in doppler_processor.v
// (lines 533-551) for the frame_complete signal.
//
// The OLD code held frame_complete as a continuous level whenever the
// Doppler processor was idle. This caused the AGC (rx_gain_control) to
// re-evaluate every clock with zeroed accumulators, collapsing gain control.
//
// The FIX detects the falling edge of processing_active:
// assign processing_active = (state != S_IDLE);
// reg processing_active_prev;
// always @(posedge clk or negedge reset_n)
// processing_active_prev <= processing_active;
// assign frame_complete = (~processing_active & processing_active_prev);
//
// This DUT wrapper replicates the EXACT pattern from doppler_processor.v.
// The adversarial tests drive the state input and verify:
// - Pulse width is EXACTLY 1 clock cycle
// - No pulse during extended idle
// - No pulse on reset deassertion
// - Back-to-back frame completions produce distinct pulses
// - State transitions not touching S_IDLE produce no pulse
// - OLD behavior (continuous level) is regressed
// ============================================================================
// ── DUT: Exact replica of doppler_processor.v frame_complete logic ──
module frame_complete_dut (
input wire clk,
input wire reset_n,
input wire [3:0] state, // Mimic doppler FSM state input
output wire processing_active,
output wire frame_complete
);
// S_IDLE encoding from doppler_processor_optimized
localparam [3:0] S_IDLE = 4'd0;
assign processing_active = (state != S_IDLE);
reg processing_active_prev;
always @(posedge clk or negedge reset_n) begin
if (!reset_n)
processing_active_prev <= 1'b0;
else
processing_active_prev <= processing_active;
end
assign frame_complete = (~processing_active & processing_active_prev);
endmodule
// ── TESTBENCH ────────────────────────────────────────────────
module tb_p0_frame_pulse;
localparam CLK_PERIOD = 10.0; // 100 MHz
// Doppler FSM state encodings (from doppler_processor_optimized)
localparam [3:0] S_IDLE = 4'd0;
localparam [3:0] S_ACCUMULATE = 4'd1;
localparam [3:0] S_WINDOW = 4'd2;
localparam [3:0] S_FFT = 4'd3;
localparam [3:0] S_OUTPUT = 4'd4;
localparam [3:0] S_NEXT_BIN = 4'd5;
// ── Test bookkeeping ─────────────────────────────────────
integer pass_count = 0;
integer fail_count = 0;
integer test_num = 0;
integer i;
task check;
input cond;
input [511:0] label;
begin
test_num = test_num + 1;
if (cond) begin
$display("[PASS] Test %0d: %0s", test_num, label);
pass_count = pass_count + 1;
end else begin
$display("[FAIL] Test %0d: %0s", test_num, label);
fail_count = fail_count + 1;
end
end
endtask
// ── DUT signals ──────────────────────────────────────────
reg clk = 0;
reg reset_n = 0;
reg [3:0] state = S_IDLE;
wire processing_active;
wire frame_complete;
always #(CLK_PERIOD/2) clk = ~clk;
frame_complete_dut dut (
.clk(clk),
.reset_n(reset_n),
.state(state),
.processing_active(processing_active),
.frame_complete(frame_complete)
);
// ── Helper ───────────────────────────────────────────────
task wait_n;
input integer n;
integer k;
begin
for (k = 0; k < n; k = k + 1) @(posedge clk);
end
endtask
// ── Count frame_complete pulses over N clocks ────────────
integer pulse_count;
task count_pulses;
input integer n_clocks;
output integer count;
integer c;
begin
count = 0;
for (c = 0; c < n_clocks; c = c + 1) begin
@(posedge clk);
if (frame_complete) count = count + 1;
end
end
endtask
// ══════════════════════════════════════════════════════════
// MAIN TEST SEQUENCE
// ══════════════════════════════════════════════════════════
initial begin
$dumpfile("tb_p0_frame_pulse.vcd");
$dumpvars(0, tb_p0_frame_pulse);
// ── RESET ────────────────────────────────────────────
state = S_IDLE;
reset_n = 0;
#100;
reset_n = 1;
@(posedge clk);
@(posedge clk);
// ──────────────────────────────────────────────────────
// TEST 1: No pulse on reset deassertion
// ──────────────────────────────────────────────────────
$display("\n=== TEST 1: Reset deassertion ===");
// processing_active = 0 (state = S_IDLE)
// processing_active_prev was reset to 0
// frame_complete = ~0 & 0 = 0
check(frame_complete == 0, "No pulse on reset deassertion (both 0)");
// ──────────────────────────────────────────────────────
// TEST 2: No pulse during extended idle
// ──────────────────────────────────────────────────────
$display("\n=== TEST 2: Extended idle ===");
count_pulses(200, pulse_count);
check(pulse_count == 0, "No pulse during 200 clocks of continuous idle");
// ──────────────────────────────────────────────────────
// TEST 3: Single frame completion — pulse width = 1
// ──────────────────────────────────────────────────────
$display("\n=== TEST 3: Single frame completion ===");
// Enter active state
@(posedge clk); #1;
state = S_ACCUMULATE;
wait_n(5);
check(processing_active == 1, "Active: processing_active = 1");
check(frame_complete == 0, "Active: no frame_complete while active");
// Stay active for 50 clocks (various states)
#1; state = S_WINDOW; wait_n(10);
#1; state = S_FFT; wait_n(10);
#1; state = S_OUTPUT; wait_n(10);
#1; state = S_NEXT_BIN; wait_n(10);
check(frame_complete == 0, "Active (multi-state): no frame_complete");
// Return to idle — should produce exactly 1 pulse
#1; state = S_IDLE;
@(posedge clk);
// On this edge: processing_active = 0, processing_active_prev = 1
// frame_complete = ~0 & 1 = 1
check(frame_complete == 1, "Completion: frame_complete fires");
@(posedge clk);
// Now: processing_active_prev catches up to 0
// frame_complete = ~0 & 0 = 0
check(frame_complete == 0, "Completion: pulse is EXACTLY 1 cycle wide");
// Verify no more pulses
count_pulses(100, pulse_count);
check(pulse_count == 0, "Post-completion: no re-fire during idle");
// ──────────────────────────────────────────────────────
// TEST 4: Back-to-back frame completions
// ──────────────────────────────────────────────────────
$display("\n=== TEST 4: Back-to-back completions ===");
begin : backtoback_test
integer total_pulses;
total_pulses = 0;
// Do 5 rapid frame cycles
for (i = 0; i < 5; i = i + 1) begin
// Go active
@(posedge clk); #1;
state = S_ACCUMULATE;
wait_n(3);
// Return to idle
#1; state = S_IDLE;
@(posedge clk);
if (frame_complete) total_pulses = total_pulses + 1;
@(posedge clk); // pulse should be gone
if (frame_complete) begin
$display(" [WARN] frame %0d: pulse persisted > 1 cycle", i);
end
end
check(total_pulses == 5, "Back-to-back: exactly 5 pulses for 5 completions");
end
// ──────────────────────────────────────────────────────
// TEST 5: State transitions not touching S_IDLE
// ──────────────────────────────────────────────────────
$display("\n=== TEST 5: Non-idle transitions ===");
@(posedge clk); #1;
state = S_ACCUMULATE;
wait_n(3);
// Cycle through active states without returning to idle
begin : nonidle_test
integer nonidle_pulses;
nonidle_pulses = 0;
#1; state = S_WINDOW;
@(posedge clk);
if (frame_complete) nonidle_pulses = nonidle_pulses + 1;
#1; state = S_FFT;
@(posedge clk);
if (frame_complete) nonidle_pulses = nonidle_pulses + 1;
#1; state = S_OUTPUT;
@(posedge clk);
if (frame_complete) nonidle_pulses = nonidle_pulses + 1;
#1; state = S_NEXT_BIN;
@(posedge clk);
if (frame_complete) nonidle_pulses = nonidle_pulses + 1;
#1; state = S_ACCUMULATE;
wait_n(10);
count_pulses(10, pulse_count);
nonidle_pulses = nonidle_pulses + pulse_count;
check(nonidle_pulses == 0,
"Non-idle transitions: zero pulses (all states active)");
end
// Return to idle (one pulse expected)
#1; state = S_IDLE;
@(posedge clk);
check(frame_complete == 1, "Cleanup: pulse on final idle transition");
@(posedge clk);
// ──────────────────────────────────────────────────────
// TEST 6: Long active period — no premature pulse
// ──────────────────────────────────────────────────────
$display("\n=== TEST 6: Long active period ===");
@(posedge clk); #1;
state = S_FFT;
count_pulses(500, pulse_count);
check(pulse_count == 0, "Long active (500 clocks): no premature pulse");
#1; state = S_IDLE;
@(posedge clk);
check(frame_complete == 1, "Long active → idle: pulse fires");
@(posedge clk);
check(frame_complete == 0, "Long active → idle: single cycle only");
// ──────────────────────────────────────────────────────
// TEST 7: Reset during active state
// ──────────────────────────────────────────────────────
$display("\n=== TEST 7: Reset during active ===");
@(posedge clk); #1;
state = S_ACCUMULATE;
wait_n(5);
// Assert reset while active
reset_n = 0;
#50;
// During reset: processing_active_prev forced to 0
// state still = S_ACCUMULATE, processing_active = 1
reset_n = 1;
@(posedge clk);
@(posedge clk);
// After reset release: prev = 0, active = 1
// frame_complete = ~1 & 0 = 0 (no spurious pulse)
check(frame_complete == 0, "Reset during active: no spurious pulse");
// Now go idle — should pulse
#1; state = S_IDLE;
@(posedge clk);
check(frame_complete == 1, "Reset recovery: pulse on idle after active");
@(posedge clk);
// ──────────────────────────────────────────────────────
// TEST 8: REGRESSION — old continuous-level behavior
// ──────────────────────────────────────────────────────
$display("\n=== TEST 8: REGRESSION ===");
// OLD code: frame_complete = (state == S_IDLE && frame_buffer_full == 0)
// This held frame_complete HIGH for the entire idle period.
// With AGC sampling frame_complete, this caused re-evaluation every clock.
//
// The FIX produces a 1-cycle pulse. We've proven:
// - Pulse width = 1 cycle (Test 3)
// - No re-fire during idle (Test 2, 3)
// - Old behavior would have frame_complete = 1 for 200+ clocks (Test 2)
//
// Quantify: old code would produce 200 "events" over 200 idle clocks.
// New code produces 0. This is the fix.
state = S_IDLE;
count_pulses(200, pulse_count);
check(pulse_count == 0,
"REGRESSION: 0 pulses in 200 idle clocks (old code: 200)");
// ══════════════════════════════════════════════════════
// SUMMARY
// ══════════════════════════════════════════════════════
$display("\n============================================");
$display(" P0 Fix #7: frame_complete Pulse Tests");
$display("============================================");
$display(" PASSED: %0d", pass_count);
$display(" FAILED: %0d", fail_count);
$display("============================================");
if (fail_count > 0)
$display("RESULT: FAIL");
else
$display("RESULT: PASS");
$finish;
end
// Timeout watchdog
initial begin
#500000;
$display("[FAIL] TIMEOUT: simulation exceeded 500us");
$finish;
end
endmodule
9_Firmware/9_2_FPGA/tb/tb_p0_mf_adversarial.v
-602
View File
@@ -1,602 +0,0 @@
`timescale 1ns / 1ps
// ============================================================================
// ADVERSARIAL TESTBENCH: Matched Filter Fixes (P0 Fixes #2, #3, #4)
// ============================================================================
// Tests three critical signal-processing invariant fixes in
// matched_filter_multi_segment.v:
//
// Fix #2 — Toggle detection: XOR replaces AND+NOT so both edges of
// mc_new_chirp generate chirp_start_pulse (not just 0→1).
//
// Fix #3 — Listen delay: ST_WAIT_LISTEN state skips TX chirp duration
// (counting ddc_valid pulses) before collecting echo samples.
//
// Fix #4 — Overlap-save trim: First 128 output bins of segments 1+
// are suppressed (circular convolution artifacts).
//
// A STUB processing chain replaces the real FFT pipeline, providing
// controlled timing for state machine verification.
// ============================================================================
// ============================================================================
// STUB: matched_filter_processing_chain
// ============================================================================
// Same port signature as the real module. Accepts 1024 adc_valid samples,
// simulates a short processing delay, then outputs 1024 range_profile_valid
// pulses with incrementing data. chain_state reports 0 when idle.
// ============================================================================
module matched_filter_processing_chain (
input wire clk,
input wire reset_n,
input wire [15:0] adc_data_i,
input wire [15:0] adc_data_q,
input wire adc_valid,
input wire [5:0] chirp_counter,
input wire [15:0] long_chirp_real,
input wire [15:0] long_chirp_imag,
input wire [15:0] short_chirp_real,
input wire [15:0] short_chirp_imag,
output reg signed [15:0] range_profile_i,
output reg signed [15:0] range_profile_q,
output reg range_profile_valid,
output wire [3:0] chain_state
);
localparam [3:0] ST_IDLE = 4'd0;
localparam [3:0] ST_COLLECTING = 4'd1;
localparam [3:0] ST_DELAY = 4'd2;
localparam [3:0] ST_OUTPUTTING = 4'd3;
localparam [3:0] ST_DONE = 4'd9;
reg [3:0] state = ST_IDLE;
reg [10:0] count = 0;
assign chain_state = state;
always @(posedge clk or negedge reset_n) begin
if (!reset_n) begin
state <= ST_IDLE;
count <= 0;
range_profile_valid <= 0;
range_profile_i <= 0;
range_profile_q <= 0;
end else begin
range_profile_valid <= 0;
case (state)
ST_IDLE: begin
count <= 0;
if (adc_valid) begin
state <= ST_COLLECTING;
count <= 1;
end
end
ST_COLLECTING: begin
if (adc_valid) begin
count <= count + 1;
if (count >= 11'd1023) begin
state <= ST_DELAY;
count <= 0;
end
end
end
ST_DELAY: begin
// Simulate processing latency (8 clocks)
count <= count + 1;
if (count >= 11'd7) begin
state <= ST_OUTPUTTING;
count <= 0;
end
end
ST_OUTPUTTING: begin
range_profile_valid <= 1;
range_profile_i <= count[15:0];
range_profile_q <= ~count[15:0];
count <= count + 1;
if (count >= 11'd1023) begin
state <= ST_DONE;
end
end
ST_DONE: begin
state <= ST_IDLE;
end
default: state <= ST_IDLE;
endcase
end
end
endmodule
// ============================================================================
// TESTBENCH
// ============================================================================
module tb_p0_mf_adversarial;
localparam CLK_PERIOD = 10.0; // 100 MHz
// Override matched_filter parameters for fast simulation
localparam TB_LONG_CHIRP = 2000; // echo samples + listen delay target
localparam TB_SHORT_CHIRP = 10;
localparam TB_LONG_SEGS = 3;
localparam TB_SHORT_SEGS = 1;
localparam TB_OVERLAP = 128;
localparam TB_BUF_SIZE = 1024;
localparam TB_SEG_ADVANCE = TB_BUF_SIZE - TB_OVERLAP; // 896
// ── Test bookkeeping ─────────────────────────────────────
integer pass_count = 0;
integer fail_count = 0;
integer test_num = 0;
integer i;
task check;
input cond;
input [511:0] label;
begin
test_num = test_num + 1;
if (cond) begin
$display("[PASS] Test %0d: %0s", test_num, label);
pass_count = pass_count + 1;
end else begin
$display("[FAIL] Test %0d: %0s", test_num, label);
fail_count = fail_count + 1;
end
end
endtask
// ── DUT signals ──────────────────────────────────────────
reg clk = 0;
reg reset_n = 0;
reg signed [17:0] ddc_i = 0;
reg signed [17:0] ddc_q = 0;
reg ddc_valid = 0;
reg use_long_chirp = 0;
reg [5:0] chirp_counter = 0;
reg mc_new_chirp = 0;
reg mc_new_elevation = 0;
reg mc_new_azimuth = 0;
reg [15:0] long_chirp_real = 0;
reg [15:0] long_chirp_imag = 0;
reg [15:0] short_chirp_real = 0;
reg [15:0] short_chirp_imag = 0;
reg mem_ready = 1; // Always ready (stub memory)
wire [1:0] segment_request;
wire [9:0] sample_addr_out;
wire mem_request_w;
wire signed [15:0] pc_i_w;
wire signed [15:0] pc_q_w;
wire pc_valid_w;
wire [3:0] status;
always #(CLK_PERIOD/2) clk = ~clk;
matched_filter_multi_segment #(
.BUFFER_SIZE(TB_BUF_SIZE),
.LONG_CHIRP_SAMPLES(TB_LONG_CHIRP),
.SHORT_CHIRP_SAMPLES(TB_SHORT_CHIRP),
.OVERLAP_SAMPLES(TB_OVERLAP),
.SEGMENT_ADVANCE(TB_SEG_ADVANCE),
.LONG_SEGMENTS(TB_LONG_SEGS),
.SHORT_SEGMENTS(TB_SHORT_SEGS),
.DEBUG(0)
) dut (
.clk(clk),
.reset_n(reset_n),
.ddc_i(ddc_i),
.ddc_q(ddc_q),
.ddc_valid(ddc_valid),
.use_long_chirp(use_long_chirp),
.chirp_counter(chirp_counter),
.mc_new_chirp(mc_new_chirp),
.mc_new_elevation(mc_new_elevation),
.mc_new_azimuth(mc_new_azimuth),
.long_chirp_real(long_chirp_real),
.long_chirp_imag(long_chirp_imag),
.short_chirp_real(short_chirp_real),
.short_chirp_imag(short_chirp_imag),
.segment_request(segment_request),
.sample_addr_out(sample_addr_out),
.mem_request(mem_request_w),
.mem_ready(mem_ready),
.pc_i_w(pc_i_w),
.pc_q_w(pc_q_w),
.pc_valid_w(pc_valid_w),
.status(status)
);
// ── Hierarchical refs for observability ──────────────────
wire [3:0] dut_state = dut.state;
wire dut_chirp_pulse = dut.chirp_start_pulse;
wire dut_elev_pulse = dut.elevation_change_pulse;
wire dut_azim_pulse = dut.azimuth_change_pulse;
wire [15:0] dut_listen_count = dut.listen_delay_count;
wire [15:0] dut_listen_target = dut.listen_delay_target;
wire [2:0] dut_segment = dut.current_segment;
wire [10:0] dut_out_bin_count = dut.output_bin_count;
wire dut_overlap_gate = dut.output_in_overlap;
// State constants (mirror matched_filter_multi_segment localparams)
localparam [3:0] ST_IDLE = 4'd0;
localparam [3:0] ST_COLLECT_DATA = 4'd1;
localparam [3:0] ST_ZERO_PAD = 4'd2;
localparam [3:0] ST_WAIT_REF = 4'd3;
localparam [3:0] ST_PROCESSING = 4'd4;
localparam [3:0] ST_WAIT_FFT = 4'd5;
localparam [3:0] ST_OUTPUT = 4'd6;
localparam [3:0] ST_NEXT_SEG = 4'd7;
localparam [3:0] ST_OVERLAP_COPY = 4'd8;
localparam [3:0] ST_WAIT_LISTEN = 4'd9;
// ── Helper tasks ─────────────────────────────────────────
task do_reset;
begin
reset_n = 0;
mc_new_chirp = 0;
mc_new_elevation = 0;
mc_new_azimuth = 0;
ddc_valid = 0;
ddc_i = 0;
ddc_q = 0;
use_long_chirp = 0;
#100;
reset_n = 1;
@(posedge clk);
@(posedge clk); // Let mc_new_chirp_prev settle to 0
end
endtask
task wait_n;
input integer n;
integer k;
begin
for (k = 0; k < n; k = k + 1) @(posedge clk);
end
endtask
// Provide N ddc_valid pulses (continuous, every clock)
task provide_samples;
input integer n;
integer k;
begin
for (k = 0; k < n; k = k + 1) begin
@(posedge clk);
ddc_i <= k[17:0];
ddc_q <= ~k[17:0];
ddc_valid <= 1;
end
@(posedge clk);
ddc_valid <= 0;
end
endtask
// Wait for DUT to reach a specific state (with timeout)
task wait_for_state;
input [3:0] target;
input integer timeout_clks;
integer t;
begin
for (t = 0; t < timeout_clks; t = t + 1) begin
@(posedge clk);
if (dut_state == target) t = timeout_clks + 1; // break
end
end
endtask
// ══════════════════════════════════════════════════════════
// MAIN TEST SEQUENCE
// ══════════════════════════════════════════════════════════
// Counters for overlap trim verification
integer seg0_valid_count;
integer seg1_valid_count;
reg seg0_counting, seg1_counting;
reg bin127_suppressed, bin128_passed;
initial begin
$dumpfile("tb_p0_mf_adversarial.vcd");
$dumpvars(0, tb_p0_mf_adversarial);
seg0_valid_count = 0;
seg1_valid_count = 0;
seg0_counting = 0;
seg1_counting = 0;
bin127_suppressed = 0;
bin128_passed = 0;
do_reset;
// ──────────────────────────────────────────────────────
// GROUP A: TOGGLE DETECTION (Fix #2)
// ──────────────────────────────────────────────────────
$display("\n=== GROUP A: Toggle Detection (Fix #2) ===");
// A1: Rising edge (0→1) generates chirp_start_pulse
@(posedge clk);
check(dut_chirp_pulse == 0, "A1 pre: no pulse before toggle");
#1; mc_new_chirp = 1; // 0→1
@(posedge clk); // pulse should fire (combinational on new vs prev)
check(dut_chirp_pulse == 1, "A1: rising edge (0->1) generates pulse");
// Pulse must be 1 cycle wide
@(posedge clk); // mc_new_chirp_prev updates to 1
check(dut_chirp_pulse == 0, "A1: pulse is single-cycle (gone on next clock)");
// Let state machine settle (it entered ST_WAIT_LISTEN)
do_reset;
// A2: Falling edge (1→0) generates pulse — THIS IS THE FIX
#1; mc_new_chirp = 1;
@(posedge clk); // prev catches up to 1
@(posedge clk); // prev = 1, mc_new_chirp = 1, XOR = 0
check(dut_chirp_pulse == 0, "A2 pre: no pulse when stable high");
#1; mc_new_chirp = 0; // 1→0
@(posedge clk); // XOR: 0 ^ 1 = 1
check(dut_chirp_pulse == 1, "A2: falling edge (1->0) generates pulse (FIX!)");
@(posedge clk);
check(dut_chirp_pulse == 0, "A2: pulse ends after 1 cycle");
do_reset;
// A3: Stable low — no spurious pulses over 50 clocks
begin : stable_low_test
reg any_pulse;
any_pulse = 0;
for (i = 0; i < 50; i = i + 1) begin
@(posedge clk);
if (dut_chirp_pulse) any_pulse = 1;
end
check(!any_pulse, "A3: stable low for 50 clocks — no spurious pulse");
end
// A4: Elevation and azimuth toggles also detected
#1; mc_new_elevation = 1; // 0→1
@(posedge clk);
check(dut_elev_pulse == 1, "A4a: elevation toggle 0->1 detected");
@(posedge clk);
#1; mc_new_elevation = 0; // 1→0
@(posedge clk);
check(dut_elev_pulse == 1, "A4b: elevation toggle 1->0 detected");
#1; mc_new_azimuth = 1;
@(posedge clk);
check(dut_azim_pulse == 1, "A4c: azimuth toggle 0->1 detected");
@(posedge clk);
#1; mc_new_azimuth = 0;
@(posedge clk);
check(dut_azim_pulse == 1, "A4d: azimuth toggle 1->0 detected");
// A5: REGRESSION — verify OLD behavior would have failed
// Old code: chirp_start_pulse = mc_new_chirp && !mc_new_chirp_prev
// This is a rising-edge detector. On 1→0: 0 && !1 = 0 (missed!)
// The NEW XOR code: 0 ^ 1 = 1 (detected!)
// We already proved this works in A2. Document the regression:
$display(" [INFO] A5 REGRESSION: old AND+NOT code produced 0 for 1->0 transition");
$display(" [INFO] old: mc_new_chirp(0) && !mc_new_chirp_prev(1) = 0 && 0 = 0 MISSED");
$display(" [INFO] new: mc_new_chirp(0) ^ mc_new_chirp_prev(1) = 0 ^ 1 = 1 DETECTED");
check(1, "A5: REGRESSION documented — falling edge was missed by old code");
do_reset;
// ──────────────────────────────────────────────────────
// GROUP B: LISTEN DELAY (Fix #3)
// ──────────────────────────────────────────────────────
$display("\n=== GROUP B: Listen Delay (Fix #3) ===");
// Use SHORT chirp: listen_delay_target = TB_SHORT_CHIRP = 10
#1; use_long_chirp = 0;
// B1: Chirp start → enters ST_WAIT_LISTEN (not ST_COLLECT_DATA)
mc_new_chirp = 1; // toggle 0→1
@(posedge clk); // pulse fires, state machine acts
@(posedge clk); // non-blocking assignment settles
check(dut_state == ST_WAIT_LISTEN, "B1: enters ST_WAIT_LISTEN (not COLLECT_DATA)");
check(dut_listen_target == TB_SHORT_CHIRP,
"B1: listen_delay_target = SHORT_CHIRP_SAMPLES");
// B2: Counter increments only on ddc_valid
// Provide 5 valid pulses, then 5 clocks without valid, then 5 more valid
for (i = 0; i < 5; i = i + 1) begin
@(posedge clk);
ddc_valid <= 1;
ddc_i <= i[17:0];
ddc_q <= 0;
end
@(posedge clk);
ddc_valid <= 0;
// Counter should be 5 after 5 valid pulses
@(posedge clk);
check(dut_listen_count == 5, "B2a: counter = 5 after 5 valid pulses");
check(dut_state == ST_WAIT_LISTEN, "B2a: still in ST_WAIT_LISTEN");
// B3: 5 clocks with no valid — counter must NOT advance
wait_n(5);
check(dut_listen_count == 5, "B3: counter stays 5 during ddc_valid gaps");
check(dut_state == ST_WAIT_LISTEN, "B3: still in ST_WAIT_LISTEN");
// B4: Provide remaining pulses to hit boundary
// Need 5 more valid pulses (total 10 = TB_SHORT_CHIRP)
// Counter transitions at >= target-1 = 9, so pulse 10 triggers
for (i = 0; i < 4; i = i + 1) begin
@(posedge clk);
ddc_valid <= 1;
ddc_i <= (i + 5);
ddc_q <= 0;
end
// After 4 more: count = 9 = target-1 → transition happens on THIS valid
@(posedge clk);
ddc_valid <= 1; // 10th pulse
@(posedge clk);
ddc_valid <= 0;
@(posedge clk); // Let non-blocking assignments settle
check(dut_state == ST_COLLECT_DATA,
"B4: transitions to ST_COLLECT_DATA after exact delay count");
// B5: First sample collected is the one AFTER the delay
// The module is now in ST_COLLECT_DATA. Provide a sample and verify
// it gets written to the buffer (buffer_write_ptr should advance)
begin : first_sample_check
reg [10:0] ptr_before;
ptr_before = dut.buffer_write_ptr;
@(posedge clk);
ddc_valid <= 1;
ddc_i <= 18'h1FACE;
ddc_q <= 18'h1BEEF;
@(posedge clk);
ddc_valid <= 0;
@(posedge clk);
check(dut.buffer_write_ptr == ptr_before + 1,
"B5: first echo sample collected (write_ptr advanced)");
end
do_reset;
// ──────────────────────────────────────────────────────
// GROUP C: OVERLAP-SAVE OUTPUT TRIM (Fix #4)
// ──────────────────────────────────────────────────────
$display("\n=== GROUP C: Overlap-Save Output Trim (Fix #4) ===");
// Use LONG chirp with 2+ segments for overlap trim testing
#1; use_long_chirp = 1;
seg0_valid_count = 0;
seg1_valid_count = 0;
// C-SETUP: Trigger chirp, pass through listen delay, process 2 segments
mc_new_chirp = 1; // toggle 0→1
@(posedge clk);
@(posedge clk);
check(dut_state == ST_WAIT_LISTEN, "C-setup: entered ST_WAIT_LISTEN");
check(dut_listen_target == TB_LONG_CHIRP,
"C-setup: listen target = LONG_CHIRP_SAMPLES");
// Pass through listen delay: provide TB_LONG_CHIRP (2000) ddc_valid pulses
$display(" [INFO] Providing %0d listen-delay samples...", TB_LONG_CHIRP);
provide_samples(TB_LONG_CHIRP);
// Should now be in ST_COLLECT_DATA
@(posedge clk);
check(dut_state == ST_COLLECT_DATA,
"C-setup: in ST_COLLECT_DATA after listen delay");
// ── SEGMENT 0: Collect 1024 samples ──
$display(" [INFO] Providing 1024 echo samples for segment 0...");
provide_samples(TB_BUF_SIZE);
// Should transition through WAIT_REF → PROCESSING → WAIT_FFT
// mem_ready is always 1, so WAIT_REF passes immediately
wait_for_state(ST_WAIT_FFT, 2000);
check(dut_state == ST_WAIT_FFT, "C-setup: seg0 reached ST_WAIT_FFT");
check(dut_segment == 0, "C-setup: processing segment 0");
// During ST_WAIT_FFT, the stub chain outputs 1024 fft_pc_valid pulses.
// Count pc_valid_w (the gated output) for segment 0.
seg0_counting = 1;
wait_for_state(ST_OUTPUT, 2000);
seg0_counting = 0;
// C1: Segment 0 — ALL output bins should pass (no trim)
check(seg0_valid_count == TB_BUF_SIZE,
"C1: segment 0 — all 1024 output bins pass (no trim)");
// Let state machine proceed to next segment
wait_for_state(ST_COLLECT_DATA, 500);
check(dut_segment == 1, "C-setup: advanced to segment 1");
// ── SEGMENT 1: Collect 896 samples (buffer starts at 128 from overlap) ──
$display(" [INFO] Providing %0d echo samples for segment 1...", TB_SEG_ADVANCE);
provide_samples(TB_SEG_ADVANCE);
// Wait for seg 1 processing
wait_for_state(ST_WAIT_FFT, 2000);
check(dut_state == ST_WAIT_FFT, "C-setup: seg1 reached ST_WAIT_FFT");
// Count pc_valid_w during segment 1 output
seg1_counting = 1;
bin127_suppressed = 0;
bin128_passed = 0;
// Monitor specific boundary bins during chain output
begin : seg1_output_monitor
integer wait_count;
for (wait_count = 0; wait_count < 2000; wait_count = wait_count + 1) begin
@(posedge clk);
// Check boundary: bin 127 should be suppressed
if (dut_out_bin_count == 127 && dut.fft_pc_valid) begin
if (pc_valid_w == 0) bin127_suppressed = 1;
end
// Check boundary: bin 128 should pass
if (dut_out_bin_count == 128 && dut.fft_pc_valid) begin
if (pc_valid_w == 1) bin128_passed = 1;
end
if (dut_state == ST_OUTPUT) begin
wait_count = 9999; // break
end
end
end
seg1_counting = 0;
// C2: Segment 1 — first 128 bins suppressed, 896 pass
check(seg1_valid_count == TB_SEG_ADVANCE,
"C2: segment 1 — exactly 896 output bins pass (128 trimmed)");
// C3: Boundary bin accuracy
check(bin127_suppressed, "C3a: bin 127 suppressed (overlap artifact)");
check(bin128_passed, "C3b: bin 128 passes (first valid bin)");
// C4: Overlap gate signal logic
// For segment != 0, output_in_overlap should be true when bin_count < 128
check(dut_segment == 1, "C4 pre: still on segment 1");
// (Gate was already verified implicitly by C2/C3 counts)
check(1, "C4: overlap gate correctly suppresses bins [0..127] on seg 1+");
// ══════════════════════════════════════════════════════
// SUMMARY
// ══════════════════════════════════════════════════════
$display("\n============================================");
$display(" P0 Fixes #2/#3/#4: MF Adversarial Tests");
$display("============================================");
$display(" PASSED: %0d", pass_count);
$display(" FAILED: %0d", fail_count);
$display("============================================");
if (fail_count > 0)
$display("RESULT: FAIL");
else
$display("RESULT: PASS");
$finish;
end
// ── Continuous counters for overlap trim verification ────
always @(posedge clk) begin
if (seg0_counting && pc_valid_w)
seg0_valid_count <= seg0_valid_count + 1;
if (seg1_counting && pc_valid_w)
seg1_valid_count <= seg1_valid_count + 1;
end
// Timeout watchdog (generous for 2000-sample listen delay + 2 segments)
initial begin
#5000000;
$display("[FAIL] TIMEOUT: simulation exceeded 5ms");
$finish;
end
endmodule
9_Firmware/9_2_FPGA/tb/tb_system_e2e.v
+14 -8
View File
@@ -382,7 +382,13 @@ end
// ============================================================================
// DUT INSTANTIATION
// ============================================================================
radar_system_top dut (
radar_system_top #(
`ifdef USB_MODE_1
.USB_MODE(1) // FT2232H interface (production 50T board)
`else
.USB_MODE(0) // FT601 interface (200T dev board)
`endif
) dut (
.clk_100m(clk_100m),
.clk_120m_dac(clk_120m_dac),
.ft601_clk_in(ft601_clk_in),
@@ -554,10 +560,10 @@ initial begin
do_reset;
// CRITICAL: Configure stream control to range-only BEFORE any chirps
// fire. The USB write FSM blocks on doppler_valid_ft if doppler stream
// is enabled but no Doppler data arrives (needs 32 chirps/frame).
// Without this, the write FSM deadlocks and the read FSM can never
// activate (it requires write FSM == IDLE).
// fire. The USB write FSM gates on pending flags: if doppler stream is
// enabled but no Doppler data arrives (needs 32 chirps/frame), the FSM
// stays in IDLE waiting for doppler_data_pending. With the write FSM
// not in IDLE, the read FSM cannot activate (bus arbitration rule).
bfm_send_cmd(8'h04, 8'h00, 16'h0001); // stream_control = range only
// Wait for stream_control CDC to propagate (2-stage sync in ft601_clk)
// Must be long enough that stream_ctrl_sync_1 is updated before any
@@ -778,7 +784,7 @@ initial begin
// Restore defaults for subsequent tests
bfm_send_cmd(8'h01, 8'h00, 16'h0001); // mode = auto-scan
bfm_send_cmd(8'h04, 8'h00, 16'h0001); // keep range-only (prevents write FSM deadlock)
bfm_send_cmd(8'h04, 8'h00, 16'h0001); // keep range-only (TB lacks 32-chirp doppler data)
bfm_send_cmd(8'h10, 8'h00, 16'd3000); // restore long chirp cycles
$display("");
@@ -913,7 +919,7 @@ initial begin
// Need to re-send configuration since reset clears all registers
stm32_mixers_enable = 1;
ft601_txe = 0;
bfm_send_cmd(8'h04, 8'h00, 16'h0001); // stream_control = range only (prevent deadlock)
bfm_send_cmd(8'h04, 8'h00, 16'h0001); // stream_control = range only (TB lacks doppler data)
#500; // Wait for stream_control CDC
bfm_send_cmd(8'h01, 8'h00, 16'h0001); // auto-scan
bfm_send_cmd(8'h10, 8'h00, 16'd100); // short timing
@@ -947,7 +953,7 @@ initial begin
check(dut.host_stream_control == 3'b000,
"G10.2: All streams disabled (stream_control = 3'b000)");
// G10.3: Re-enable range only (keep range-only to prevent write FSM deadlock)
// G10.3: Re-enable range only (TB uses range-only — no doppler processing)
bfm_send_cmd(8'h04, 8'h00, 16'h0001); // stream_control = 3'b001
check(dut.host_stream_control == 3'b001,
"G10.3: Range stream re-enabled (stream_control = 3'b001)");
9_Firmware/9_2_FPGA/tb/tb_usb_data_interface.v
+180 -210
View File
@@ -6,15 +6,11 @@ module tb_usb_data_interface;
localparam CLK_PERIOD = 10.0; // 100 MHz main clock
localparam FT_CLK_PERIOD = 10.0; // 100 MHz FT601 clock (asynchronous)
// State definitions (mirror the DUT)
localparam [2:0] S_IDLE = 3'd0,
S_SEND_HEADER = 3'd1,
S_SEND_RANGE = 3'd2,
S_SEND_DOPPLER = 3'd3,
S_SEND_DETECT = 3'd4,
S_SEND_FOOTER = 3'd5,
S_WAIT_ACK = 3'd6,
S_SEND_STATUS = 3'd7; // Gap 2: status readback
// State definitions (mirror the DUT — 4-state packed-word FSM)
localparam [3:0] S_IDLE = 4'd0,
S_SEND_DATA_WORD = 4'd1,
S_SEND_STATUS = 4'd2,
S_WAIT_ACK = 4'd3;
// ── Signals ────────────────────────────────────────────────
reg clk;
@@ -219,9 +215,9 @@ module tb_usb_data_interface;
end
endtask
// ── Helper: wait for DUT to reach a specific state ─────────
// ── Helper: wait for DUT to reach a specific write FSM state ──
task wait_for_state;
input [2:0] target;
input [3:0] target;
input integer max_cyc;
integer cnt;
begin
@@ -280,7 +276,7 @@ module tb_usb_data_interface;
// Set data_pending flags directly via hierarchical access.
// This is the standard TB technique for internal state setup —
// bypasses the CDC path for immediate, reliable flag setting.
// Call BEFORE assert_range_valid in tests that need SEND_DOPPLER/DETECT.
// Call BEFORE assert_range_valid in tests that need doppler/cfar data.
task preload_pending_data;
begin
@(posedge ft601_clk_in);
@@ -354,24 +350,26 @@ module tb_usb_data_interface;
end
endtask
// Drive a complete packet through the FSM by sequentially providing
// range, doppler (4x), and cfar valid pulses.
// Drive a complete data packet through the new 3-word packed FSM.
// Pre-loads pending flags, triggers range_valid, and waits for IDLE.
// With the new FSM, all data is pre-packed in IDLE then sent as 3 words.
task drive_full_packet;
input [31:0] rng;
input [15:0] dr;
input [15:0] di;
input det;
begin
// Pre-load pending flags so FSM enters doppler/cfar states
// Set doppler/cfar captured values via CDC inputs
@(posedge clk);
doppler_real = dr;
doppler_imag = di;
cfar_detection = det;
@(posedge clk);
// Pre-load pending flags so FSM includes doppler/cfar in packet
preload_pending_data;
// Trigger the packet
assert_range_valid(rng);
wait_for_state(S_SEND_DOPPLER, 100);
pulse_doppler_once(dr, di);
pulse_doppler_once(dr, di);
pulse_doppler_once(dr, di);
pulse_doppler_once(dr, di);
wait_for_state(S_SEND_DETECT, 100);
pulse_cfar_once(det);
// Wait for complete packet cycle: IDLE → SEND_DATA_WORD(×3) → WAIT_ACK → IDLE
wait_for_state(S_IDLE, 100);
end
endtask
@@ -414,101 +412,138 @@ module tb_usb_data_interface;
"ft601_siwu_n=1 after reset");
// ════════════════════════════════════════════════════════
// TEST GROUP 2: Range data packet
// TEST GROUP 2: Data packet word packing
//
// Use backpressure to freeze the FSM at specific states
// so we can reliably sample outputs.
// New FSM packs 11-byte data into 3 × 32-bit words:
// Word 0: {HEADER, range[31:24], range[23:16], range[15:8]}
// Word 1: {range[7:0], dop_re_hi, dop_re_lo, dop_im_hi}
// Word 2: {dop_im_lo, detection, FOOTER, 0x00} BE=1110
//
// The DUT uses range_data_ready (1-cycle delayed range_valid_ft)
// to trigger packing. Doppler/CFAR _cap registers must be
// pre-loaded via hierarchical access because no valid pulse is
// given in this test (we only want to verify packing, not CDC).
// ════════════════════════════════════════════════════════
$display("\n--- Test Group 2: Range Data Packet ---");
$display("\n--- Test Group 2: Data Packet Word Packing ---");
apply_reset;
ft601_txe = 1; // Stall so we can inspect packed words
// Stall at SEND_HEADER so we can verify first range word later
ft601_txe = 1;
// Set known doppler/cfar values on clk-domain inputs
@(posedge clk);
doppler_real = 16'hABCD;
doppler_imag = 16'hEF01;
cfar_detection = 1'b1;
@(posedge clk);
// Pre-load pending flags AND captured-data registers directly.
// No doppler/cfar valid pulses are given, so the CDC capture path
// never fires — we must set the _cap registers via hierarchical
// access for the word-packing checks to be meaningful.
preload_pending_data;
@(posedge ft601_clk_in);
uut.doppler_real_cap = 16'hABCD;
uut.doppler_imag_cap = 16'hEF01;
uut.cfar_detection_cap = 1'b1;
@(posedge ft601_clk_in);
assert_range_valid(32'hDEAD_BEEF);
wait_for_state(S_SEND_HEADER, 50);
repeat (2) @(posedge ft601_clk_in); #1;
check(uut.current_state === S_SEND_HEADER,
"Stalled in SEND_HEADER (backpressure)");
// Release: FSM drives header then moves to SEND_RANGE_DATA
// FSM should be in SEND_DATA_WORD, stalled on ft601_txe=1
wait_for_state(S_SEND_DATA_WORD, 50);
repeat (2) @(posedge ft601_clk_in); #1;
check(uut.current_state === S_SEND_DATA_WORD,
"Stalled in SEND_DATA_WORD (backpressure)");
// Verify pre-packed words
// range_profile = 0xDEAD_BEEF → range[31:24]=0xDE, [23:16]=0xAD, [15:8]=0xBE, [7:0]=0xEF
// Word 0: {0xAA, 0xDE, 0xAD, 0xBE}
check(uut.data_pkt_word0 === {8'hAA, 8'hDE, 8'hAD, 8'hBE},
"Word 0: {HEADER=AA, range[31:8]}");
// Word 1: {0xEF, 0xAB, 0xCD, 0xEF}
check(uut.data_pkt_word1 === {8'hEF, 8'hAB, 8'hCD, 8'hEF},
"Word 1: {range[7:0], dop_re, dop_im_hi}");
// Word 2: {0x01, detection_byte, 0x55, 0x00}
// detection_byte bit 7 = frame_start (sample_counter==0 → 1), bit 0 = cfar=1
// so detection_byte = 8'b1000_0001 = 8'h81
check(uut.data_pkt_word2 === {8'h01, 8'h81, 8'h55, 8'h00},
"Word 2: {dop_im_lo, det=81, FOOTER=55, pad=00}");
check(uut.data_pkt_be2 === 4'b1110,
"Word 2 BE=1110 (3 valid bytes + 1 pad)");
// Release backpressure and verify word 0 appears on bus.
// On the first posedge with !ft601_txe the FSM drives word 0 and
// advances data_word_idx 0→1 via NBA. After #1 the NBA has
// resolved, so we see idx=1 and ft601_data_out=word0.
ft601_txe = 0;
@(posedge ft601_clk_in); #1;
// Now the FSM registered the header output and will transition
// At the NEXT posedge the state becomes SEND_RANGE_DATA
@(posedge ft601_clk_in); #1;
check(uut.current_state === S_SEND_RANGE,
"Entered SEND_RANGE_DATA after header");
// The first range word should be on the data bus (byte_counter=0 just
// drove range_profile_cap, byte_counter incremented to 1)
check(uut.ft601_data_out === 32'hDEAD_BEEF || uut.byte_counter <= 8'd1,
"Range data word 0 driven (range_profile_cap)");
check(uut.ft601_data_out === {8'hAA, 8'hDE, 8'hAD, 8'hBE},
"Word 0 driven on data bus after backpressure release");
check(ft601_wr_n === 1'b0,
"Write strobe active during range data");
"Write strobe active during SEND_DATA_WORD");
check(ft601_be === 4'b1111,
"Byte enable=1111 for range data");
"Byte enable=1111 for word 0");
check(uut.ft601_data_oe === 1'b1,
"Data bus output enabled during SEND_DATA_WORD");
// Wait for all 4 range words to complete
wait_for_state(S_SEND_DOPPLER, 50);
#1;
check(uut.current_state === S_SEND_DOPPLER,
"Advanced to SEND_DOPPLER_DATA after 4 range words");
// Next posedge: FSM drives word 1, advances idx 1→2.
// After NBA: idx=2, ft601_data_out=word1.
@(posedge ft601_clk_in); #1;
check(uut.data_word_idx === 2'd2,
"data_word_idx advanced past word 1 (now 2)");
check(uut.ft601_data_out === {8'hEF, 8'hAB, 8'hCD, 8'hEF},
"Word 1 driven on data bus");
check(ft601_be === 4'b1111,
"Byte enable=1111 for word 1");
// Next posedge: FSM drives word 2, idx resets 2→0,
// and current_state transitions to WAIT_ACK.
@(posedge ft601_clk_in); #1;
check(uut.current_state === S_WAIT_ACK,
"Transitioned to WAIT_ACK after 3 data words");
check(uut.ft601_data_out === {8'h01, 8'h81, 8'h55, 8'h00},
"Word 2 driven on data bus");
check(ft601_be === 4'b1110,
"Byte enable=1110 for word 2 (last byte is pad)");
// Then back to IDLE
@(posedge ft601_clk_in); #1;
check(uut.current_state === S_IDLE,
"Returned to IDLE after WAIT_ACK");
// ════════════════════════════════════════════════════════
// TEST GROUP 3: Header verification (stall to observe)
// TEST GROUP 3: Header and footer verification
// ════════════════════════════════════════════════════════
$display("\n--- Test Group 3: Header Verification ---");
$display("\n--- Test Group 3: Header and Footer Verification ---");
apply_reset;
ft601_txe = 1; // Stall at SEND_HEADER
ft601_txe = 1; // Stall to inspect
@(posedge clk);
range_profile = 32'hCAFE_BABE;
range_valid = 1;
repeat (4) @(posedge ft601_clk_in);
doppler_real = 16'h0000;
doppler_imag = 16'h0000;
cfar_detection = 1'b0;
@(posedge clk);
range_valid = 0;
repeat (3) @(posedge ft601_clk_in);
preload_pending_data;
assert_range_valid(32'hCAFE_BABE);
wait_for_state(S_SEND_HEADER, 50);
wait_for_state(S_SEND_DATA_WORD, 50);
repeat (2) @(posedge ft601_clk_in); #1;
check(uut.current_state === S_SEND_HEADER,
"Stalled in SEND_HEADER with backpressure");
// Release backpressure - header will be latched at next posedge
ft601_txe = 0;
@(posedge ft601_clk_in); #1;
check(uut.ft601_data_out[7:0] === 8'hAA,
"Header byte 0xAA on data bus");
check(ft601_be === 4'b0001,
"Byte enable=0001 for header (lower byte only)");
check(ft601_wr_n === 1'b0,
"Write strobe active during header");
check(uut.ft601_data_oe === 1'b1,
"Data bus output enabled during header");
// Header is in byte 3 (MSB) of word 0
check(uut.data_pkt_word0[31:24] === 8'hAA,
"Header byte 0xAA in word 0 MSB");
// Footer is in byte 1 (bits [15:8]) of word 2
check(uut.data_pkt_word2[15:8] === 8'h55,
"Footer byte 0x55 in word 2");
// ════════════════════════════════════════════════════════
// TEST GROUP 4: Doppler data verification
// TEST GROUP 4: Doppler data capture verification
// ════════════════════════════════════════════════════════
$display("\n--- Test Group 4: Doppler Data Verification ---");
$display("\n--- Test Group 4: Doppler Data Capture ---");
apply_reset;
ft601_txe = 0;
// Preload only doppler pending (not cfar) so the FSM sends
// doppler data. After doppler, SEND_DETECT sees cfar_data_pending=0
// and skips to SEND_FOOTER, then WAIT_ACK, then IDLE.
preload_doppler_pending;
assert_range_valid(32'h0000_0001);
wait_for_state(S_SEND_DOPPLER, 100);
#1;
check(uut.current_state === S_SEND_DOPPLER,
"Reached SEND_DOPPLER_DATA");
// Provide doppler data via valid pulse (updates captured values)
@(posedge clk);
doppler_real = 16'hAAAA;
@@ -524,110 +559,70 @@ module tb_usb_data_interface;
check(uut.doppler_imag_cap === 16'h5555,
"doppler_imag captured correctly");
// The FSM has doppler_data_pending set and sends 4 bytes, then
// transitions past SEND_DETECT (cfar_data_pending=0) to IDLE.
// Drive a packet with pending doppler + cfar (both needed for gating
// since all streams are enabled after reset/apply_reset).
preload_pending_data;
assert_range_valid(32'h0000_0001);
wait_for_state(S_IDLE, 100);
#1;
check(uut.current_state === S_IDLE,
"Doppler done, packet completed");
"Packet completed with doppler data");
check(uut.doppler_data_pending === 1'b0,
"doppler_data_pending cleared after packet");
// ════════════════════════════════════════════════════════
// TEST GROUP 5: CFAR detection data
// ════════════════════════════════════════════════════════
$display("\n--- Test Group 5: CFAR Detection Data ---");
// Start a new packet with both doppler and cfar pending to verify
// cfar data is properly sent in SEND_DETECTION_DATA.
apply_reset;
ft601_txe = 0;
preload_pending_data;
assert_range_valid(32'h0000_0002);
// FSM races through: HEADER -> RANGE -> DOPPLER -> DETECT -> FOOTER -> IDLE
// All pending flags consumed proves SEND_DETECT was entered.
wait_for_state(S_IDLE, 200);
#1;
check(uut.cfar_data_pending === 1'b0,
"Starting in SEND_DETECTION_DATA");
// Verify the full packet completed with cfar data consumed
"cfar_data_pending cleared after packet");
check(uut.current_state === S_IDLE &&
uut.doppler_data_pending === 1'b0 &&
uut.cfar_data_pending === 1'b0,
"CFAR detection sent, FSM advanced past SEND_DETECTION_DATA");
"CFAR detection sent, all pending flags cleared");
// ════════════════════════════════════════════════════════
// TEST GROUP 6: Footer check
//
// Strategy: drive packet with ft601_txe=0 all the way through.
// The SEND_FOOTER state is only active for 1 cycle, but we can
// poll the state machine at each ft601_clk_in edge to observe
// it. We use a monitor-style approach: run the packet and
// capture what ft601_data_out contains when we see SEND_FOOTER.
// TEST GROUP 6: Footer retained after packet
// ════════════════════════════════════════════════════════
$display("\n--- Test Group 6: Footer Check ---");
$display("\n--- Test Group 6: Footer Retention ---");
apply_reset;
ft601_txe = 0;
// Drive packet through range data
@(posedge clk);
cfar_detection = 1'b1;
@(posedge clk);
preload_pending_data;
assert_range_valid(32'hFACE_FEED);
wait_for_state(S_SEND_DOPPLER, 100);
// Feed doppler data (need 4 pulses)
pulse_doppler_once(16'h1111, 16'h2222);
pulse_doppler_once(16'h1111, 16'h2222);
pulse_doppler_once(16'h1111, 16'h2222);
pulse_doppler_once(16'h1111, 16'h2222);
wait_for_state(S_SEND_DETECT, 100);
// Feed cfar data, but keep ft601_txe=0 so it flows through
pulse_cfar_once(1'b1);
// Now the FSM should pass through SEND_FOOTER quickly.
// Use wait_for_state to reach SEND_FOOTER, or it may already
// be at WAIT_ACK/IDLE. Let's catch WAIT_ACK or IDLE.
// The footer values are latched into registers, so we can
// verify them even after the state transitions.
// Key verification: the FOOTER constant (0x55) must have been
// driven. We check this by looking at the constant definition.
// Since we can't easily freeze the FSM at SEND_FOOTER without
// also stalling SEND_DETECTION_DATA (both check ft601_txe),
// we verify the footer indirectly:
// 1. The packet completed (reached IDLE/WAIT_ACK)
// 2. ft601_data_out last held 0x55 during SEND_FOOTER
wait_for_state(S_IDLE, 100);
#1;
// If we reached IDLE, the full sequence ran including footer
check(uut.current_state === S_IDLE,
"Full packet incl. footer completed, back in IDLE");
// The registered ft601_data_out should still hold 0x55 from
// SEND_FOOTER (WAIT_ACK and IDLE don't overwrite ft601_data_out).
// Actually, looking at the DUT: WAIT_ACK only sets wr_n=1 and
// data_oe=0, it doesn't change ft601_data_out. So it retains 0x55.
check(uut.ft601_data_out[7:0] === 8'h55,
"ft601_data_out retains footer 0x55 after packet");
// The last word driven was word 2 which contains footer 0x55.
// WAIT_ACK and IDLE don't overwrite ft601_data_out, so it retains
// the last driven value.
check(uut.ft601_data_out[15:8] === 8'h55,
"ft601_data_out retains footer 0x55 in word 2 position");
// Verify WAIT_ACK behavior by doing another packet and catching it
// Verify WAIT_ACK → IDLE transition
apply_reset;
ft601_txe = 0;
preload_pending_data;
assert_range_valid(32'h1234_5678);
wait_for_state(S_SEND_DOPPLER, 100);
pulse_doppler_once(16'hABCD, 16'hEF01);
pulse_doppler_once(16'hABCD, 16'hEF01);
pulse_doppler_once(16'hABCD, 16'hEF01);
pulse_doppler_once(16'hABCD, 16'hEF01);
wait_for_state(S_SEND_DETECT, 100);
pulse_cfar_once(1'b0);
// WAIT_ACK lasts exactly 1 ft601_clk_in cycle then goes IDLE.
// Poll for IDLE (which means WAIT_ACK already happened).
wait_for_state(S_IDLE, 100);
#1;
check(uut.current_state === S_IDLE,
"Returned to IDLE after WAIT_ACK");
check(ft601_wr_n === 1'b1,
"ft601_wr_n deasserted in IDLE (was deasserted in WAIT_ACK)");
"ft601_wr_n deasserted in IDLE");
check(uut.ft601_data_oe === 1'b0,
"Data bus released in IDLE (was released in WAIT_ACK)");
"Data bus released in IDLE");
// ════════════════════════════════════════════════════════
// TEST GROUP 7: Full packet sequence (end-to-end)
@@ -646,23 +641,24 @@ module tb_usb_data_interface;
// ════════════════════════════════════════════════════════
$display("\n--- Test Group 8: FIFO Backpressure ---");
apply_reset;
ft601_txe = 1;
ft601_txe = 1; // FIFO full — stall
preload_pending_data;
assert_range_valid(32'hBBBB_CCCC);
wait_for_state(S_SEND_HEADER, 50);
wait_for_state(S_SEND_DATA_WORD, 50);
repeat (10) @(posedge ft601_clk_in); #1;
check(uut.current_state === S_SEND_HEADER,
"Stalled in SEND_HEADER when ft601_txe=1 (FIFO full)");
check(uut.current_state === S_SEND_DATA_WORD,
"Stalled in SEND_DATA_WORD when ft601_txe=1 (FIFO full)");
check(ft601_wr_n === 1'b1,
"ft601_wr_n not asserted during backpressure stall");
ft601_txe = 0;
repeat (2) @(posedge ft601_clk_in); #1;
repeat (6) @(posedge ft601_clk_in); #1;
check(uut.current_state !== S_SEND_HEADER,
"Resumed from SEND_HEADER after backpressure released");
check(uut.current_state === S_IDLE || uut.current_state === S_WAIT_ACK,
"Resumed and completed after backpressure released");
// ════════════════════════════════════════════════════════
// TEST GROUP 9: Clock divider
@@ -705,13 +701,6 @@ module tb_usb_data_interface;
ft601_txe = 0;
preload_pending_data;
assert_range_valid(32'h1111_2222);
wait_for_state(S_SEND_DOPPLER, 100);
pulse_doppler_once(16'h3333, 16'h4444);
pulse_doppler_once(16'h3333, 16'h4444);
pulse_doppler_once(16'h3333, 16'h4444);
pulse_doppler_once(16'h3333, 16'h4444);
wait_for_state(S_SEND_DETECT, 100);
pulse_cfar_once(1'b0);
wait_for_state(S_WAIT_ACK, 50);
#1;
@@ -805,7 +794,7 @@ module tb_usb_data_interface;
// Start a write packet
preload_pending_data;
assert_range_valid(32'hFACE_FEED);
wait_for_state(S_SEND_HEADER, 50);
wait_for_state(S_SEND_DATA_WORD, 50);
@(posedge ft601_clk_in); #1;
// While write FSM is active, assert RXF=0 (host has data)
@@ -818,13 +807,6 @@ module tb_usb_data_interface;
// Deassert RXF, complete the write packet
ft601_rxf = 1;
wait_for_state(S_SEND_DOPPLER, 100);
pulse_doppler_once(16'hAAAA, 16'hBBBB);
pulse_doppler_once(16'hAAAA, 16'hBBBB);
pulse_doppler_once(16'hAAAA, 16'hBBBB);
pulse_doppler_once(16'hAAAA, 16'hBBBB);
wait_for_state(S_SEND_DETECT, 100);
pulse_cfar_once(1'b1);
wait_for_state(S_IDLE, 100);
@(posedge ft601_clk_in); #1;
@@ -841,32 +823,42 @@ module tb_usb_data_interface;
// ════════════════════════════════════════════════════════
// TEST GROUP 15: Stream Control Gating (Gap 2)
// Verify that disabling individual streams causes the write
// FSM to skip those data phases.
// FSM to zero those fields in the packed words.
// ════════════════════════════════════════════════════════
$display("\n--- Test Group 15: Stream Control Gating (Gap 2) ---");
// 15a: Disable doppler stream (stream_control = 3'b101 = range + cfar only)
apply_reset;
ft601_txe = 0;
ft601_txe = 1; // Stall to inspect packed words
stream_control = 3'b101; // range + cfar, no doppler
// Wait for CDC propagation (2-stage sync)
repeat (6) @(posedge ft601_clk_in);
// Preload cfar pending so the FSM enters the SEND_DETECT data path
// (without it, SEND_DETECT skips immediately on !cfar_data_pending).
preload_cfar_pending;
// Drive range valid — triggers write FSM
assert_range_valid(32'hAA11_BB22);
// FSM: IDLE -> SEND_HEADER -> SEND_RANGE (doppler disabled) -> SEND_DETECT -> FOOTER
// The FSM races through SEND_DETECT in 1 cycle (cfar_data_pending is consumed).
// Verify the packet completed correctly (doppler was skipped).
wait_for_state(S_IDLE, 200);
#1;
// Reaching IDLE proves: HEADER -> RANGE -> (skip DOPPLER) -> DETECT -> FOOTER -> ACK -> IDLE.
// cfar_data_pending consumed confirms SEND_DETECT was entered.
check(uut.current_state === S_IDLE && uut.cfar_data_pending === 1'b0,
"Stream gate: reached SEND_DETECT (range sent, doppler skipped)");
@(posedge clk);
doppler_real = 16'hAAAA;
doppler_imag = 16'hBBBB;
cfar_detection = 1'b1;
@(posedge clk);
preload_cfar_pending;
assert_range_valid(32'hAA11_BB22);
wait_for_state(S_SEND_DATA_WORD, 200);
repeat (2) @(posedge ft601_clk_in); #1;
// With doppler disabled, doppler fields in words 1 and 2 should be zero
// Word 1: {range[7:0], 0x00, 0x00, 0x00} (doppler zeroed)
check(uut.data_pkt_word1[23:0] === 24'h000000,
"Stream gate: doppler bytes zeroed in word 1 when disabled");
// Word 2 byte 3 (dop_im_lo) should also be zero
check(uut.data_pkt_word2[31:24] === 8'h00,
"Stream gate: dop_im_lo zeroed in word 2 when disabled");
// Let it complete
ft601_txe = 0;
wait_for_state(S_IDLE, 100);
#1;
check(uut.current_state === S_IDLE,
"Stream gate: packet completed without doppler");
@@ -951,28 +943,6 @@ module tb_usb_data_interface;
"Status readback: returned to IDLE after 8-word response");
// Verify the status snapshot was captured correctly.
// status_words[0] = {0xFF, 3'b000, mode[1:0], 5'b0, stream_ctrl[2:0], cfar_threshold[15:0]}
// = {8'hFF, 3'b000, 2'b01, 5'b00000, 3'b101, 16'hABCD}
// = 0xFF_09_05_ABCD... let's compute:
// Byte 3: 0xFF = 8'hFF
// Byte 2: {3'b000, 2'b01} = 5'b00001 + 3 high bits of next field...
// Actually the packing is: {8'hFF, 3'b000, status_radar_mode[1:0], 5'b00000, status_stream_ctrl[2:0], status_cfar_threshold[15:0]}
// = {8'hFF, 3'b000, 2'b01, 5'b00000, 3'b101, 16'hABCD}
// = 8'hFF, 5'b00001, 8'b00000101, 16'hABCD
// = FF_09_05_ABCD? Let me compute carefully:
// Bits [31:24] = 8'hFF = 0xFF
// Bits [23:21] = 3'b000
// Bits [20:19] = 2'b01 (mode)
// Bits [18:14] = 5'b00000
// Bits [13:11] = 3'b101 (stream_ctrl)
// Bits [10:0] = ... wait, cfar_threshold is 16 bits → [15:0]
// Total bits = 8+3+2+5+3+16 = 37 bits — won't fit in 32!
// Re-reading the RTL: the packing at line 241 is:
// {8'hFF, 3'b000, status_radar_mode, 5'b00000, status_stream_ctrl, status_cfar_threshold}
// = 8 + 3 + 2 + 5 + 3 + 16 = 37 bits
// This would be truncated to 32 bits. Let me re-read the actual RTL to check.
// For now, just verify status_words[1] (word index 1 in the packet = idx 2 in FSM)
// status_words[1] = {status_long_chirp, status_long_listen} = {16'd3000, 16'd13700}
check(uut.status_words[1] === {16'd3000, 16'd13700},
"Status readback: word 1 = {long_chirp, long_listen}");
check(uut.status_words[2] === {16'd17540, 16'd50},
9_Firmware/9_2_FPGA/usb_data_interface.v
+187 -130
View File
@@ -1,3 +1,17 @@
/**
* usb_data_interface.v
*
* FT601 USB 3.0 SuperSpeed FIFO Interface (32-bit bus, 100 MHz ft601_clk).
* Used on the 200T premium dev board. Production 50T board uses
* usb_data_interface_ft2232h.v (FT2232H, 8-bit, 60 MHz) instead.
*
* USB disconnect recovery:
* A clock-activity watchdog in the clk domain detects when ft601_clk_in
* stops (USB cable unplugged). After ~0.65 ms of silence (65536 system
* clocks) it asserts ft601_clk_lost, which is OR'd into the FT-domain
* reset so FSMs and FIFOs return to a clean state. When ft601_clk_in
* resumes, a 2-stage reset synchronizer deasserts the reset cleanly.
*/
module usb_data_interface (
input wire clk, // Main clock (100MHz recommended)
input wire reset_n,
@@ -15,13 +29,18 @@ module usb_data_interface (
// FT601 Interface (Slave FIFO mode)
// Data bus
inout wire [31:0] ft601_data, // 32-bit bidirectional data bus
output reg [3:0] ft601_be, // Byte enable (4 lanes for 32-bit mode)
output reg [3:0] ft601_be, // Byte enable (active-HIGH per DS_FT600Q-FT601Q Table 3.2)
// Control signals
output reg ft601_txe_n, // Transmit enable (active low)
output reg ft601_rxf_n, // Receive enable (active low)
input wire ft601_txe, // TXE: Transmit FIFO Not Full (high = space available to write)
input wire ft601_rxf, // RXF: Receive FIFO Not Empty (high = data available to read)
// VESTIGIAL OUTPUTS — kept for 200T board port compatibility.
// On the 200T, these are constrained to physical pins G21 (TXE) and
// G22 (RXF) in xc7a200t_fbg484.xdc. Removing them from the RTL would
// break the 200T build. They are reset to 1 and never driven; the
// actual FT601 flow-control inputs are ft601_txe and ft601_rxf below.
output reg ft601_txe_n, // VESTIGIAL: unused output, always 1
output reg ft601_rxf_n, // VESTIGIAL: unused output, always 1
input wire ft601_txe, // TXE: Transmit FIFO Not Full (active-low: 0 = space available)
input wire ft601_rxf, // RXF: Receive FIFO Not Empty (active-low: 0 = data available)
output reg ft601_wr_n, // Write strobe (active low)
output reg ft601_rd_n, // Read strobe (active low)
output reg ft601_oe_n, // Output enable (active low)
@@ -97,21 +116,26 @@ localparam FT601_BURST_SIZE = 512; // Max burst size in bytes
// ============================================================================
// WRITE FSM State definitions (Verilog-2001 compatible)
// ============================================================================
localparam [2:0] IDLE = 3'd0,
SEND_HEADER = 3'd1,
SEND_RANGE_DATA = 3'd2,
SEND_DOPPLER_DATA = 3'd3,
SEND_DETECTION_DATA = 3'd4,
SEND_FOOTER = 3'd5,
WAIT_ACK = 3'd6,
SEND_STATUS = 3'd7; // Gap 2: status readback
// Rewritten: data packet is now 3 x 32-bit writes (11 payload bytes + 1 pad).
// Word 0: {HEADER, range[31:24], range[23:16], range[15:8]} BE=1111
// Word 1: {range[7:0], doppler_real[15:8], doppler_real[7:0], doppler_imag[15:8]} BE=1111
// Word 2: {doppler_imag[7:0], detection, FOOTER, 8'h00} BE=1110
localparam [3:0] IDLE = 4'd0,
SEND_DATA_WORD = 4'd1,
SEND_STATUS = 4'd2,
WAIT_ACK = 4'd3;
reg [2:0] current_state;
reg [7:0] byte_counter;
reg [31:0] data_buffer;
reg [3:0] current_state;
reg [1:0] data_word_idx; // 0..2 for 3-word data packet
reg [31:0] ft601_data_out;
reg ft601_data_oe; // Output enable for bidirectional data bus
// Pre-packed data words (registered snapshot of CDC'd data)
reg [31:0] data_pkt_word0;
reg [31:0] data_pkt_word1;
reg [31:0] data_pkt_word2;
reg [3:0] data_pkt_be2; // BE for last word (BE=1110 since byte 3 is pad)
// ============================================================================
// READ FSM State definitions (Gap 4: USB Read Path)
// ============================================================================
@@ -184,6 +208,67 @@ always @(posedge clk or negedge reset_n) begin
end
end
// ============================================================================
// CLOCK-ACTIVITY WATCHDOG (clk domain)
// ============================================================================
// Detects when ft601_clk_in stops (USB cable unplugged). A toggle register
// in the ft601_clk domain flips every edge. The clk domain synchronizes it
// and checks for transitions. If no transition is seen for 2^16 = 65536
// clk cycles (~0.65 ms at 100 MHz), ft601_clk_lost asserts.
// Toggle register: flips every ft601_clk edge (ft601_clk domain)
reg ft601_heartbeat;
always @(posedge ft601_clk_in or negedge ft601_reset_n) begin
if (!ft601_reset_n)
ft601_heartbeat <= 1'b0;
else
ft601_heartbeat <= ~ft601_heartbeat;
end
// Synchronize heartbeat into clk domain (2-stage)
(* ASYNC_REG = "TRUE" *) reg [1:0] ft601_hb_sync;
reg ft601_hb_prev;
reg [15:0] ft601_clk_timeout;
reg ft601_clk_lost;
always @(posedge clk or negedge reset_n) begin
if (!reset_n) begin
ft601_hb_sync <= 2'b00;
ft601_hb_prev <= 1'b0;
ft601_clk_timeout <= 16'd0;
ft601_clk_lost <= 1'b0;
end else begin
ft601_hb_sync <= {ft601_hb_sync[0], ft601_heartbeat};
ft601_hb_prev <= ft601_hb_sync[1];
if (ft601_hb_sync[1] != ft601_hb_prev) begin
// ft601_clk is alive — reset counter, clear lost flag
ft601_clk_timeout <= 16'd0;
ft601_clk_lost <= 1'b0;
end else if (!ft601_clk_lost) begin
if (ft601_clk_timeout == 16'hFFFF)
ft601_clk_lost <= 1'b1;
else
ft601_clk_timeout <= ft601_clk_timeout + 16'd1;
end
end
end
// Effective FT601-domain reset: asserted by global reset OR clock loss.
// Deassertion synchronized to ft601_clk via 2-stage sync to avoid
// metastability on the recovery edge.
(* ASYNC_REG = "TRUE" *) reg [1:0] ft601_reset_sync;
wire ft601_reset_raw_n = ft601_reset_n & ~ft601_clk_lost;
always @(posedge ft601_clk_in or negedge ft601_reset_raw_n) begin
if (!ft601_reset_raw_n)
ft601_reset_sync <= 2'b00;
else
ft601_reset_sync <= {ft601_reset_sync[0], 1'b1};
end
wire ft601_effective_reset_n = ft601_reset_sync[1];
// FT601-domain captured data (sampled from holding regs on sync'd edge)
reg [31:0] range_profile_cap;
reg [15:0] doppler_real_cap;
@@ -197,6 +282,18 @@ reg cfar_detection_cap;
reg doppler_data_pending;
reg cfar_data_pending;
// 1-cycle delayed range trigger. range_valid_ft fires on the same clock
// edge that range_profile_cap is captured (non-blocking). If the FSM
// reads range_profile_cap on that same edge it sees the STALE value.
// Delaying the trigger by one cycle guarantees the capture register has
// settled before the FSM packs the data words.
reg range_data_ready;
// Frame sync: sample counter (ft601_clk domain, wraps at NUM_CELLS)
// Bit 7 of detection byte is set when sample_counter == 0 (frame start).
localparam [11:0] NUM_CELLS = 12'd2048; // 64 range x 32 doppler
reg [11:0] sample_counter;
// Gap 2: CDC for stream_control (clk_100m -> ft601_clk_in)
// stream_control changes infrequently (only on host USB command), so
// per-bit 2-stage synchronizers are sufficient. No Gray coding needed
@@ -228,8 +325,8 @@ wire range_valid_ft;
wire doppler_valid_ft;
wire cfar_valid_ft;
always @(posedge ft601_clk_in or negedge ft601_reset_n) begin
if (!ft601_reset_n) begin
always @(posedge ft601_clk_in or negedge ft601_effective_reset_n) begin
if (!ft601_effective_reset_n) begin
range_valid_sync <= 2'b00;
doppler_valid_sync <= 2'b00;
cfar_valid_sync <= 2'b00;
@@ -240,6 +337,7 @@ always @(posedge ft601_clk_in or negedge ft601_reset_n) begin
doppler_real_cap <= 16'd0;
doppler_imag_cap <= 16'd0;
cfar_detection_cap <= 1'b0;
range_data_ready <= 1'b0;
// Fix #5: Default to range-only on reset (prevents write FSM deadlock)
stream_ctrl_sync_0 <= 3'b001;
stream_ctrl_sync_1 <= 3'b001;
@@ -276,7 +374,7 @@ always @(posedge ft601_clk_in or negedge ft601_reset_n) begin
// Word 4: AGC metrics + range_mode
status_words[4] <= {status_agc_current_gain, // [31:28]
status_agc_peak_magnitude, // [27:20]
status_agc_saturation_count, // [19:12]
status_agc_saturation_count, // [19:12] 8-bit saturation count
status_agc_enable, // [11]
9'd0, // [10:2] reserved
status_range_mode}; // [1:0]
@@ -302,6 +400,10 @@ always @(posedge ft601_clk_in or negedge ft601_reset_n) begin
if (cfar_valid_sync[1] && !cfar_valid_sync_d) begin
cfar_detection_cap <= cfar_detection_hold;
end
// 1-cycle delayed trigger: ensures range_profile_cap has settled
// before the FSM reads it for word packing.
range_data_ready <= range_valid_ft;
end
end
@@ -314,11 +416,11 @@ assign cfar_valid_ft = cfar_valid_sync[1] && !cfar_valid_sync_d;
// FT601 data bus direction control
assign ft601_data = ft601_data_oe ? ft601_data_out : 32'hzzzz_zzzz;
always @(posedge ft601_clk_in or negedge ft601_reset_n) begin
if (!ft601_reset_n) begin
always @(posedge ft601_clk_in or negedge ft601_effective_reset_n) begin
if (!ft601_effective_reset_n) begin
current_state <= IDLE;
read_state <= RD_IDLE;
byte_counter <= 0;
data_word_idx <= 2'd0;
ft601_data_out <= 0;
ft601_data_oe <= 0;
ft601_be <= 4'b1111; // All bytes enabled for 32-bit mode
@@ -336,6 +438,11 @@ always @(posedge ft601_clk_in or negedge ft601_reset_n) begin
cmd_value <= 16'd0;
doppler_data_pending <= 1'b0;
cfar_data_pending <= 1'b0;
data_pkt_word0 <= 32'd0;
data_pkt_word1 <= 32'd0;
data_pkt_word2 <= 32'd0;
data_pkt_be2 <= 4'b1110;
sample_counter <= 12'd0;
// NOTE: ft601_clk_out is driven by the clk-domain always block below.
// Do NOT assign it here (ft601_clk_in domain) — causes multi-driven net.
end else begin
@@ -424,124 +531,66 @@ always @(posedge ft601_clk_in or negedge ft601_reset_n) begin
current_state <= SEND_STATUS;
status_word_idx <= 3'd0;
end
// Trigger write FSM on range_valid edge (primary data source).
// Doppler/cfar data_pending flags are checked inside
// SEND_DOPPLER_DATA and SEND_DETECTION_DATA to skip or send.
// Do NOT trigger on pending flags alone — they're sticky and
// would cause repeated packet starts without new range data.
else if (range_valid_ft && stream_range_en) begin
// Trigger on range_data_ready (1 cycle after range_valid_ft)
// so that range_profile_cap has settled from the CDC block.
// Gate on pending flags: only send when all enabled
// streams have fresh data (avoids stale doppler/CFAR)
else if (range_data_ready && stream_range_en
&& (!stream_doppler_en || doppler_data_pending)
&& (!stream_cfar_en || cfar_data_pending)) begin
// Don't start write if a read is about to begin
if (ft601_rxf) begin // rxf=1 means no host data pending
current_state <= SEND_HEADER;
byte_counter <= 0;
// Pack 11-byte data packet into 3 x 32-bit words
// Doppler fields zeroed when stream disabled
// CFAR field zeroed when stream disabled
data_pkt_word0 <= {HEADER,
range_profile_cap[31:24],
range_profile_cap[23:16],
range_profile_cap[15:8]};
data_pkt_word1 <= {range_profile_cap[7:0],
stream_doppler_en ? doppler_real_cap[15:8] : 8'd0,
stream_doppler_en ? doppler_real_cap[7:0] : 8'd0,
stream_doppler_en ? doppler_imag_cap[15:8] : 8'd0};
data_pkt_word2 <= {stream_doppler_en ? doppler_imag_cap[7:0] : 8'd0,
stream_cfar_en
? {(sample_counter == 12'd0), 6'b0, cfar_detection_cap}
: {(sample_counter == 12'd0), 7'd0},
FOOTER,
8'h00}; // pad byte
data_pkt_be2 <= 4'b1110; // 3 valid bytes + 1 pad
data_word_idx <= 2'd0;
current_state <= SEND_DATA_WORD;
end
end
end
SEND_HEADER: begin
if (!ft601_txe) begin // FT601 TX FIFO not empty
ft601_data_oe <= 1;
ft601_data_out <= {24'b0, HEADER};
ft601_be <= 4'b0001; // Only lower byte valid
ft601_wr_n <= 0; // Assert write strobe
// Gap 2: skip to first enabled stream
if (stream_range_en)
current_state <= SEND_RANGE_DATA;
else if (stream_doppler_en)
current_state <= SEND_DOPPLER_DATA;
else if (stream_cfar_en)
current_state <= SEND_DETECTION_DATA;
else
current_state <= SEND_FOOTER; // No streams — send footer only
end
end
SEND_RANGE_DATA: begin
SEND_DATA_WORD: begin
if (!ft601_txe) begin
ft601_data_oe <= 1;
ft601_be <= 4'b1111; // All bytes valid for 32-bit word
case (byte_counter)
0: ft601_data_out <= range_profile_cap;
1: ft601_data_out <= {range_profile_cap[23:0], 8'h00};
2: ft601_data_out <= {range_profile_cap[15:0], 16'h0000};
3: ft601_data_out <= {range_profile_cap[7:0], 24'h000000};
ft601_wr_n <= 0;
case (data_word_idx)
2'd0: begin
ft601_data_out <= data_pkt_word0;
ft601_be <= 4'b1111;
end
2'd1: begin
ft601_data_out <= data_pkt_word1;
ft601_be <= 4'b1111;
end
2'd2: begin
ft601_data_out <= data_pkt_word2;
ft601_be <= data_pkt_be2;
end
default: ;
endcase
ft601_wr_n <= 0;
if (byte_counter == 3) begin
byte_counter <= 0;
// Gap 2: skip disabled streams
if (stream_doppler_en)
current_state <= SEND_DOPPLER_DATA;
else if (stream_cfar_en)
current_state <= SEND_DETECTION_DATA;
else
current_state <= SEND_FOOTER;
if (data_word_idx == 2'd2) begin
data_word_idx <= 2'd0;
current_state <= WAIT_ACK;
end else begin
byte_counter <= byte_counter + 1;
data_word_idx <= data_word_idx + 2'd1;
end
end
end
SEND_DOPPLER_DATA: begin
if (!ft601_txe && doppler_data_pending) begin
ft601_data_oe <= 1;
ft601_be <= 4'b1111;
case (byte_counter)
0: ft601_data_out <= {doppler_real_cap, doppler_imag_cap};
1: ft601_data_out <= {doppler_imag_cap, doppler_real_cap[15:8], 8'h00};
2: ft601_data_out <= {doppler_real_cap[7:0], doppler_imag_cap[15:8], 16'h0000};
3: ft601_data_out <= {doppler_imag_cap[7:0], 24'h000000};
endcase
ft601_wr_n <= 0;
if (byte_counter == 3) begin
byte_counter <= 0;
doppler_data_pending <= 1'b0;
if (stream_cfar_en)
current_state <= SEND_DETECTION_DATA;
else
current_state <= SEND_FOOTER;
end else begin
byte_counter <= byte_counter + 1;
end
end else if (!doppler_data_pending) begin
// No doppler data available yet — skip to next stream
byte_counter <= 0;
if (stream_cfar_en)
current_state <= SEND_DETECTION_DATA;
else
current_state <= SEND_FOOTER;
end
end
SEND_DETECTION_DATA: begin
if (!ft601_txe && cfar_data_pending) begin
ft601_data_oe <= 1;
ft601_be <= 4'b0001;
ft601_data_out <= {24'b0, 7'b0, cfar_detection_cap};
ft601_wr_n <= 0;
cfar_data_pending <= 1'b0;
current_state <= SEND_FOOTER;
end else if (!cfar_data_pending) begin
// No CFAR data available yet — skip to footer
current_state <= SEND_FOOTER;
end
end
SEND_FOOTER: begin
if (!ft601_txe) begin
ft601_data_oe <= 1;
ft601_be <= 4'b0001;
ft601_data_out <= {24'b0, FOOTER};
ft601_wr_n <= 0;
current_state <= WAIT_ACK;
end
end
// Gap 2: Status readback — send 6 x 32-bit status words
// Format: HEADER, status_words[0..5], FOOTER
@@ -581,6 +630,14 @@ always @(posedge ft601_clk_in or negedge ft601_reset_n) begin
WAIT_ACK: begin
ft601_wr_n <= 1;
ft601_data_oe <= 0; // Release data bus
// Clear pending flags — data consumed
doppler_data_pending <= 1'b0;
cfar_data_pending <= 1'b0;
// Advance frame sync counter
if (sample_counter == NUM_CELLS - 12'd1)
sample_counter <= 12'd0;
else
sample_counter <= sample_counter + 12'd1;
current_state <= IDLE;
end
endcase
@@ -613,8 +670,8 @@ ODDR #(
`else
// Simulation: behavioral clock forwarding
reg ft601_clk_out_sim;
always @(posedge ft601_clk_in or negedge ft601_reset_n) begin
if (!ft601_reset_n)
always @(posedge ft601_clk_in or negedge ft601_effective_reset_n) begin
if (!ft601_effective_reset_n)
ft601_clk_out_sim <= 1'b0;
else
ft601_clk_out_sim <= 1'b1;
9_Firmware/9_2_FPGA/usb_data_interface_ft2232h.v
+131 -19
View File
@@ -36,6 +36,13 @@
* Clock domains:
* clk = 100 MHz system clock (radar data domain)
* ft_clk = 60 MHz from FT2232H CLKOUT (USB FIFO domain)
*
* USB disconnect recovery:
* A clock-activity watchdog in the clk domain detects when ft_clk stops
* (USB cable unplugged). After ~0.65 ms of silence (65536 system clocks)
* it asserts ft_clk_lost, which is OR'd into the FT-domain reset so
* FSMs and FIFOs return to a clean state. When ft_clk resumes, a 2-stage
* reset synchronizer deasserts the reset cleanly in the ft_clk domain.
*/
module usb_data_interface_ft2232h (
@@ -59,7 +66,9 @@ module usb_data_interface_ft2232h (
output reg ft_rd_n, // Read strobe (active low)
output reg ft_wr_n, // Write strobe (active low)
output reg ft_oe_n, // Output enable (active low) — bus direction
output reg ft_siwu, // Send Immediate / WakeUp
output reg ft_siwu, // Send Immediate / WakeUp — UNUSED: held low.
// SIWU could flush the TX FIFO for lower latency
// but is not needed at current data rates. Deferred.
// Clock from FT2232H (directly used — no ODDR forwarding needed)
input wire ft_clk, // 60 MHz from FT2232H CLKOUT
@@ -134,6 +143,7 @@ localparam [2:0] RD_IDLE = 3'd0,
reg [2:0] rd_state;
reg [1:0] rd_byte_cnt; // 0..3 for 4-byte command word
reg [31:0] rd_shift_reg; // Shift register to assemble 4-byte command
reg rd_cmd_complete; // Set when all 4 bytes received (distinguishes from abort)
// ============================================================================
// DATA BUS DIRECTION CONTROL
@@ -192,6 +202,70 @@ always @(posedge clk or negedge reset_n) begin
end
end
// ============================================================================
// CLOCK-ACTIVITY WATCHDOG (clk domain)
// ============================================================================
// Detects when ft_clk stops (USB cable unplugged). A toggle register in the
// ft_clk domain flips every ft_clk edge. The clk domain synchronizes it and
// checks for transitions. If no transition is seen for 2^16 = 65536 clk
// cycles (~0.65 ms at 100 MHz), ft_clk_lost asserts.
//
// ft_clk_lost feeds into the effective reset for the ft_clk domain so that
// FSMs and capture registers return to a clean state automatically.
// Toggle register: flips every ft_clk edge (ft_clk domain)
reg ft_heartbeat;
always @(posedge ft_clk or negedge ft_reset_n) begin
if (!ft_reset_n)
ft_heartbeat <= 1'b0;
else
ft_heartbeat <= ~ft_heartbeat;
end
// Synchronize heartbeat into clk domain (2-stage)
(* ASYNC_REG = "TRUE" *) reg [1:0] ft_hb_sync;
reg ft_hb_prev;
reg [15:0] ft_clk_timeout;
reg ft_clk_lost;
always @(posedge clk or negedge reset_n) begin
if (!reset_n) begin
ft_hb_sync <= 2'b00;
ft_hb_prev <= 1'b0;
ft_clk_timeout <= 16'd0;
ft_clk_lost <= 1'b0;
end else begin
ft_hb_sync <= {ft_hb_sync[0], ft_heartbeat};
ft_hb_prev <= ft_hb_sync[1];
if (ft_hb_sync[1] != ft_hb_prev) begin
// ft_clk is alive — reset counter, clear lost flag
ft_clk_timeout <= 16'd0;
ft_clk_lost <= 1'b0;
end else if (!ft_clk_lost) begin
if (ft_clk_timeout == 16'hFFFF)
ft_clk_lost <= 1'b1;
else
ft_clk_timeout <= ft_clk_timeout + 16'd1;
end
end
end
// Effective FT-domain reset: asserted by global reset OR clock loss.
// Deassertion synchronized to ft_clk via 2-stage sync to avoid
// metastability on the recovery edge.
(* ASYNC_REG = "TRUE" *) reg [1:0] ft_reset_sync;
wire ft_reset_raw_n = ft_reset_n & ~ft_clk_lost;
always @(posedge ft_clk or negedge ft_reset_raw_n) begin
if (!ft_reset_raw_n)
ft_reset_sync <= 2'b00;
else
ft_reset_sync <= {ft_reset_sync[0], 1'b1};
end
wire ft_effective_reset_n = ft_reset_sync[1];
// --- 3-stage synchronizers (ft_clk domain) ---
// 3 stages for better MTBF at 60 MHz
@@ -228,12 +302,25 @@ reg cfar_detection_cap;
reg doppler_data_pending;
reg cfar_data_pending;
// 1-cycle delayed range trigger. range_valid_ft fires on the same clock
// edge that range_profile_cap is captured (non-blocking). If the FSM
// reads range_profile_cap on that same edge it sees the STALE value.
// Delaying the trigger by one cycle guarantees the capture register has
// settled before the byte mux reads it.
reg range_data_ready;
// Frame sync: sample counter (ft_clk domain, wraps at NUM_CELLS)
// Bit 7 of detection byte is set when sample_counter == 0 (frame start).
// This allows the Python host to resynchronize without a protocol change.
localparam [11:0] NUM_CELLS = 12'd2048; // 64 range x 32 doppler
reg [11:0] sample_counter;
// Status snapshot (ft_clk domain)
reg [31:0] status_words [0:5];
integer si; // status_words loop index
always @(posedge ft_clk or negedge ft_reset_n) begin
if (!ft_reset_n) begin
always @(posedge ft_clk or negedge ft_effective_reset_n) begin
if (!ft_effective_reset_n) begin
range_toggle_sync <= 3'b000;
doppler_toggle_sync <= 3'b000;
cfar_toggle_sync <= 3'b000;
@@ -246,6 +333,7 @@ always @(posedge ft_clk or negedge ft_reset_n) begin
doppler_real_cap <= 16'd0;
doppler_imag_cap <= 16'd0;
cfar_detection_cap <= 1'b0;
range_data_ready <= 1'b0;
// Default to range-only on reset (prevents write FSM deadlock)
stream_ctrl_sync_0 <= 3'b001;
stream_ctrl_sync_1 <= 3'b001;
@@ -279,6 +367,10 @@ always @(posedge ft_clk or negedge ft_reset_n) begin
if (cfar_valid_ft)
cfar_detection_cap <= cfar_detection_hold;
// 1-cycle delayed trigger: ensures range_profile_cap has settled
// before the FSM reads it via the byte mux.
range_data_ready <= range_valid_ft;
// Status snapshot on request
if (status_req_ft) begin
// Word 0: {0xFF[31:24], mode[23:22], stream[21:19], 3'b000[18:16], threshold[15:0]}
@@ -315,11 +407,16 @@ always @(*) begin
5'd2: data_pkt_byte = range_profile_cap[23:16];
5'd3: data_pkt_byte = range_profile_cap[15:8];
5'd4: data_pkt_byte = range_profile_cap[7:0]; // range LSB
5'd5: data_pkt_byte = doppler_real_cap[15:8]; // doppler_real MSB
5'd6: data_pkt_byte = doppler_real_cap[7:0]; // doppler_real LSB
5'd7: data_pkt_byte = doppler_imag_cap[15:8]; // doppler_imag MSB
5'd8: data_pkt_byte = doppler_imag_cap[7:0]; // doppler_imag LSB
5'd9: data_pkt_byte = {7'b0, cfar_detection_cap}; // detection
// Doppler fields: zero when stream_doppler_en is off
5'd5: data_pkt_byte = stream_doppler_en ? doppler_real_cap[15:8] : 8'd0;
5'd6: data_pkt_byte = stream_doppler_en ? doppler_real_cap[7:0] : 8'd0;
5'd7: data_pkt_byte = stream_doppler_en ? doppler_imag_cap[15:8] : 8'd0;
5'd8: data_pkt_byte = stream_doppler_en ? doppler_imag_cap[7:0] : 8'd0;
// Detection field: zero when stream_cfar_en is off
// Bit 7 = frame_start flag (sample_counter == 0), bit 0 = cfar_detection
5'd9: data_pkt_byte = stream_cfar_en
? {(sample_counter == 12'd0), 6'b0, cfar_detection_cap}
: {(sample_counter == 12'd0), 7'd0};
5'd10: data_pkt_byte = FOOTER;
default: data_pkt_byte = 8'h00;
endcase
@@ -376,12 +473,13 @@ end
// Write FSM and Read FSM share the bus. Write FSM operates when Read FSM
// is idle. Read FSM takes priority when host has data available.
always @(posedge ft_clk or negedge ft_reset_n) begin
if (!ft_reset_n) begin
always @(posedge ft_clk or negedge ft_effective_reset_n) begin
if (!ft_effective_reset_n) begin
wr_state <= WR_IDLE;
wr_byte_idx <= 5'd0;
rd_state <= RD_IDLE;
rd_byte_cnt <= 2'd0;
rd_cmd_complete <= 1'b0;
rd_shift_reg <= 32'd0;
ft_data_out <= 8'd0;
ft_data_oe <= 1'b0;
@@ -396,6 +494,7 @@ always @(posedge ft_clk or negedge ft_reset_n) begin
cmd_value <= 16'd0;
doppler_data_pending <= 1'b0;
cfar_data_pending <= 1'b0;
sample_counter <= 12'd0;
end else begin
// Default: clear one-shot signals
cmd_valid <= 1'b0;
@@ -437,17 +536,19 @@ always @(posedge ft_clk or negedge ft_reset_n) begin
rd_shift_reg <= {rd_shift_reg[23:0], ft_data};
if (rd_byte_cnt == 2'd3) begin
// All 4 bytes received
ft_rd_n <= 1'b1;
rd_byte_cnt <= 2'd0;
rd_state <= RD_DEASSERT;
ft_rd_n <= 1'b1;
rd_byte_cnt <= 2'd0;
rd_cmd_complete <= 1'b1;
rd_state <= RD_DEASSERT;
end else begin
rd_byte_cnt <= rd_byte_cnt + 2'd1;
// Keep reading if more data available
if (ft_rxf_n) begin
// Host ran out of data mid-command — abort
ft_rd_n <= 1'b1;
rd_byte_cnt <= 2'd0;
rd_state <= RD_DEASSERT;
ft_rd_n <= 1'b1;
rd_byte_cnt <= 2'd0;
rd_cmd_complete <= 1'b0;
rd_state <= RD_DEASSERT;
end
end
end
@@ -456,7 +557,8 @@ always @(posedge ft_clk or negedge ft_reset_n) begin
// Deassert OE (1 cycle after RD deasserted)
ft_oe_n <= 1'b1;
// Only process if we received a full 4-byte command
if (rd_byte_cnt == 2'd0) begin
if (rd_cmd_complete) begin
rd_cmd_complete <= 1'b0;
rd_state <= RD_PROCESS;
end else begin
// Incomplete command — discard
@@ -491,8 +593,13 @@ always @(posedge ft_clk or negedge ft_reset_n) begin
wr_state <= WR_STATUS_SEND;
wr_byte_idx <= 5'd0;
end
// Trigger on range_valid edge (primary data trigger)
else if (range_valid_ft && stream_range_en) begin
// Trigger on range_data_ready (1 cycle after range_valid_ft)
// so that range_profile_cap has settled from the CDC block.
// Gate on pending flags: only send when all enabled
// streams have fresh data (avoids stale doppler/CFAR)
else if (range_data_ready && stream_range_en
&& (!stream_doppler_en || doppler_data_pending)
&& (!stream_cfar_en || cfar_data_pending)) begin
if (ft_rxf_n) begin // No host read pending
wr_state <= WR_DATA_SEND;
wr_byte_idx <= 5'd0;
@@ -538,6 +645,11 @@ always @(posedge ft_clk or negedge ft_reset_n) begin
// Clear pending flags — data consumed
doppler_data_pending <= 1'b0;
cfar_data_pending <= 1'b0;
// Advance frame sync counter
if (sample_counter == NUM_CELLS - 12'd1)
sample_counter <= 12'd0;
else
sample_counter <= sample_counter + 12'd1;
wr_state <= WR_IDLE;
end
9_Firmware/9_3_GUI/GUI_V6.py
+6
View File
@@ -1,3 +1,9 @@
# =============================================================================
# DEPRECATED: GUI V6 is superseded by GUI_V65_Tk (tkinter) and V7 (PyQt6).
# This file is retained for reference only. Do not use for new development.
# Removal planned for next major release.
# =============================================================================
import tkinter as tk
from tkinter import ttk, messagebox
import threading
9_Firmware/9_3_GUI/GUI_V65_Tk.py
+48 -20
View File
@@ -59,7 +59,7 @@ except (ModuleNotFoundError, ImportError):
# Import protocol layer (no GUI deps)
from radar_protocol import (
RadarProtocol, FT2232HConnection,
RadarProtocol, FT2232HConnection, FT601Connection,
DataRecorder, RadarAcquisition,
RadarFrame, StatusResponse,
NUM_RANGE_BINS, NUM_DOPPLER_BINS, WATERFALL_DEPTH,
@@ -98,9 +98,10 @@ class DemoTarget:
__slots__ = ("azimuth", "classification", "id", "range_m", "snr", "velocity")
# Physical range grid: 64 bins x ~4.8 m/bin = ~307 m max
_RANGE_PER_BIN: float = (3e8 / (2 * 500e6)) * 16 # ~4.8 m
_MAX_RANGE: float = _RANGE_PER_BIN * NUM_RANGE_BINS # ~307 m
# Physical range grid: 64 bins x ~24 m/bin = ~1536 m max
# Bin spacing = c / (2 * Fs) * decimation, where Fs = 100 MHz DDC output.
_RANGE_PER_BIN: float = (3e8 / (2 * 100e6)) * 16 # ~24 m
_MAX_RANGE: float = _RANGE_PER_BIN * NUM_RANGE_BINS # ~1536 m
def __init__(self, tid: int):
self.id = tid
@@ -187,10 +188,10 @@ class DemoSimulator:
mag = np.zeros((NUM_RANGE_BINS, NUM_DOPPLER_BINS), dtype=np.float64)
det = np.zeros((NUM_RANGE_BINS, NUM_DOPPLER_BINS), dtype=np.uint8)
# Range/Doppler scaling (approximate)
range_per_bin = (3e8 / (2 * 500e6)) * 16 # ~4.8 m/bin
# Range/Doppler scaling: bin spacing = c/(2*Fs)*decimation
range_per_bin = (3e8 / (2 * 100e6)) * 16 # ~24 m/bin
max_range = range_per_bin * NUM_RANGE_BINS
vel_per_bin = 1.484 # m/s per Doppler bin (from WaveformConfig)
vel_per_bin = 5.34 # m/s per Doppler bin (radar_scene.py: lam/(2*16*PRI))
for t in targets:
if t.range_m > max_range or t.range_m < 0:
@@ -385,13 +386,14 @@ class RadarDashboard:
UPDATE_INTERVAL_MS = 100 # 10 Hz display refresh
# Radar parameters used for range-axis scaling.
BANDWIDTH = 500e6 # Hz — chirp bandwidth
SAMPLE_RATE = 100e6 # Hz — DDC output I/Q rate (matched filter input)
C = 3e8 # m/s — speed of light
def __init__(self, root: tk.Tk, connection: FT2232HConnection,
def __init__(self, root: tk.Tk, mock: bool,
recorder: DataRecorder, device_index: int = 0):
self.root = root
self.conn = connection
self._mock = mock
self.conn: FT2232HConnection | FT601Connection | None = None
self.recorder = recorder
self.device_index = device_index
@@ -485,6 +487,16 @@ class RadarDashboard:
style="Accent.TButton")
self.btn_connect.pack(side="right", padx=4)
# USB Interface selector (production FT2232H / premium FT601)
self._usb_iface_var = tk.StringVar(value="FT2232H (Production)")
self.cmb_usb_iface = ttk.Combobox(
top, textvariable=self._usb_iface_var,
values=["FT2232H (Production)", "FT601 (Premium)"],
state="readonly", width=20,
)
self.cmb_usb_iface.pack(side="right", padx=4)
ttk.Label(top, text="USB:", font=("Menlo", 10)).pack(side="right")
self.btn_record = ttk.Button(top, text="Record", command=self._on_record)
self.btn_record.pack(side="right", padx=4)
@@ -515,9 +527,8 @@ class RadarDashboard:
def _build_display_tab(self, parent):
# Compute physical axis limits
range_res = self.C / (2.0 * self.BANDWIDTH) # ~0.3 m per FFT bin
# After decimation 1024→64, each range bin = 16 FFT bins
range_per_bin = range_res * 16
# Bin spacing = c / (2 * Fs_ddc) for matched-filter processing.
range_per_bin = self.C / (2.0 * self.SAMPLE_RATE) * 16 # ~24 m
max_range = range_per_bin * NUM_RANGE_BINS
doppler_bin_lo = 0
@@ -1018,15 +1029,17 @@ class RadarDashboard:
# ------------------------------------------------------------ Actions
def _on_connect(self):
if self.conn.is_open:
if self.conn is not None and self.conn.is_open:
# Disconnect
if self._acq_thread is not None:
self._acq_thread.stop()
self._acq_thread.join(timeout=2)
self._acq_thread = None
self.conn.close()
self.conn = None
self.lbl_status.config(text="DISCONNECTED", foreground=RED)
self.btn_connect.config(text="Connect")
self.cmb_usb_iface.config(state="readonly")
log.info("Disconnected")
return
@@ -1036,6 +1049,16 @@ class RadarDashboard:
if self._replay_active:
self._replay_stop()
# Create connection based on USB Interface selector
iface = self._usb_iface_var.get()
if "FT601" in iface:
self.conn = FT601Connection(mock=self._mock)
else:
self.conn = FT2232HConnection(mock=self._mock)
# Disable interface selector while connecting/connected
self.cmb_usb_iface.config(state="disabled")
# Open connection in a background thread to avoid blocking the GUI
self.lbl_status.config(text="CONNECTING...", foreground=YELLOW)
self.btn_connect.config(state="disabled")
@@ -1062,6 +1085,8 @@ class RadarDashboard:
else:
self.lbl_status.config(text="CONNECT FAILED", foreground=RED)
self.btn_connect.config(text="Connect")
self.cmb_usb_iface.config(state="readonly")
self.conn = None
def _on_record(self):
if self.recorder.recording:
@@ -1110,6 +1135,9 @@ class RadarDashboard:
f"Opcode 0x{opcode:02X} is hardware-only (ignored in replay)"))
return
cmd = RadarProtocol.build_command(opcode, value)
if self.conn is None:
log.warning("No connection — command not sent")
return
ok = self.conn.write(cmd)
log.info(f"CMD 0x{opcode:02X} val={value} ({'OK' if ok else 'FAIL'})")
@@ -1148,7 +1176,7 @@ class RadarDashboard:
if self._replay_active or self._replay_ctrl is not None:
self._replay_stop()
if self._acq_thread is not None:
if self.conn.is_open:
if self.conn is not None and self.conn.is_open:
self._on_connect() # disconnect
else:
# Connection dropped unexpectedly — just clean up the thread
@@ -1547,17 +1575,17 @@ def main():
args = parser.parse_args()
if args.live:
conn = FT2232HConnection(mock=False)
mock = False
mode_str = "LIVE"
else:
conn = FT2232HConnection(mock=True)
mock = True
mode_str = "MOCK"
recorder = DataRecorder()
root = tk.Tk()
dashboard = RadarDashboard(root, conn, recorder, device_index=args.device)
dashboard = RadarDashboard(root, mock, recorder, device_index=args.device)
if args.record:
filepath = os.path.join(
@@ -1582,8 +1610,8 @@ def main():
if dashboard._acq_thread is not None:
dashboard._acq_thread.stop()
dashboard._acq_thread.join(timeout=2)
if conn.is_open:
conn.close()
if dashboard.conn is not None and dashboard.conn.is_open:
dashboard.conn.close()
if recorder.recording:
recorder.stop()
root.destroy()
9_Firmware/9_3_GUI/GUI_V6_Demo.py
+6
View File
@@ -1,5 +1,11 @@
#!/usr/bin/env python3
# =============================================================================
# DEPRECATED: GUI V6 Demo is superseded by GUI_V65_Tk and V7.
# This file is retained for reference only. Do not use for new development.
# Removal planned for next major release.
# =============================================================================
"""
Radar System GUI - Fully Functional Demo Version
All buttons work, simulated radar data is generated in real-time
9_Firmware/9_3_GUI/GUI_versions.txt
+1 -1
View File
@@ -6,7 +6,7 @@ GUI_V4 ==> Added pitch correction
GUI_V5 ==> Added Mercury Color
GUI_V6 ==> Added USB3 FT601 support
GUI_V6 ==> Added USB3 FT601 support [DEPRECATED — superseded by V65/V7]
GUI_V65_Tk ==> Board bring-up dashboard (FT2232H reader, real-time R-D heatmap, CFAR overlay, waterfall, host commands, HDF5 recording, replay, demo mode)
radar_protocol ==> Protocol layer (packet parsing, command building, FT2232H connection, data recorder, acquisition thread)
9_Firmware/9_3_GUI/radar_protocol.py
+200 -6
View File
@@ -6,6 +6,7 @@ Pure-logic module for USB packet parsing and command building.
No GUI dependencies — safe to import from tests and headless scripts.
USB Interface: FT2232H USB 2.0 (8-bit, 50T production board) via pyftdi
FT601 USB 3.0 (32-bit, 200T premium board) via ftd3xx
USB Packet Protocol (11-byte):
TX (FPGA→Host):
@@ -22,7 +23,7 @@ import queue
import logging
import contextlib
from dataclasses import dataclass, field
from typing import Any
from typing import Any, ClassVar
from enum import IntEnum
@@ -200,7 +201,9 @@ class RadarProtocol:
range_i = _to_signed16(struct.unpack_from(">H", raw, 3)[0])
doppler_i = _to_signed16(struct.unpack_from(">H", raw, 5)[0])
doppler_q = _to_signed16(struct.unpack_from(">H", raw, 7)[0])
detection = raw[9] & 0x01
det_byte = raw[9]
detection = det_byte & 0x01
frame_start = (det_byte >> 7) & 0x01
return {
"range_i": range_i,
@@ -208,6 +211,7 @@ class RadarProtocol:
"doppler_i": doppler_i,
"doppler_q": doppler_q,
"detection": detection,
"frame_start": frame_start,
}
@staticmethod
@@ -433,7 +437,191 @@ class FT2232HConnection:
pkt += struct.pack(">h", np.clip(range_i, -32768, 32767))
pkt += struct.pack(">h", np.clip(dop_i, -32768, 32767))
pkt += struct.pack(">h", np.clip(dop_q, -32768, 32767))
pkt.append(detection & 0x01)
# Bit 7 = frame_start (sample_counter == 0), bit 0 = detection
det_byte = (detection & 0x01) | (0x80 if idx == 0 else 0x00)
pkt.append(det_byte)
pkt.append(FOOTER_BYTE)
buf += pkt
self._mock_seq_idx = (start_idx + num_packets) % NUM_CELLS
return bytes(buf)
# ============================================================================
# FT601 USB 3.0 Connection (premium board only)
# ============================================================================
# Optional ftd3xx import (FTDI's proprietary driver for FT60x USB 3.0 chips).
# pyftdi does NOT support FT601 — it only handles USB 2.0 chips (FT232H, etc.)
try:
import ftd3xx # type: ignore[import-untyped]
FTD3XX_AVAILABLE = True
_Ftd3xxError: type = ftd3xx.FTD3XXError # type: ignore[attr-defined]
except ImportError:
FTD3XX_AVAILABLE = False
_Ftd3xxError = OSError # fallback for type-checking; never raised
class FT601Connection:
"""
FT601 USB 3.0 SuperSpeed FIFO bridge — premium board only.
The FT601 has a 32-bit data bus and runs at 100 MHz.
VID:PID = 0x0403:0x6030 or 0x6031 (FTDI FT60x).
Requires the ``ftd3xx`` library (``pip install ftd3xx`` on Windows,
or ``libft60x`` on Linux). This is FTDI's proprietary USB 3.0 driver;
``pyftdi`` only supports USB 2.0 and will NOT work with FT601.
Public contract matches FT2232HConnection so callers can swap freely.
"""
VID = 0x0403
PID_LIST: ClassVar[list[int]] = [0x6030, 0x6031]
def __init__(self, mock: bool = True):
self._mock = mock
self._dev = None
self._lock = threading.Lock()
self.is_open = False
# Mock state (reuses same synthetic data pattern)
self._mock_frame_num = 0
self._mock_rng = np.random.RandomState(42)
def open(self, device_index: int = 0) -> bool:
if self._mock:
self.is_open = True
log.info("FT601 mock device opened (no hardware)")
return True
if not FTD3XX_AVAILABLE:
log.error(
"ftd3xx library required for FT601 hardware — "
"install with: pip install ftd3xx"
)
return False
try:
self._dev = ftd3xx.create(device_index, ftd3xx.OPEN_BY_INDEX)
if self._dev is None:
log.error("No FT601 device found at index %d", device_index)
return False
# Verify chip configuration — only reconfigure if needed.
# setChipConfiguration triggers USB re-enumeration, which
# invalidates the device handle and requires a re-open cycle.
cfg = self._dev.getChipConfiguration()
needs_reconfig = (
cfg.FIFOMode != 0 # 245 FIFO mode
or cfg.ChannelConfig != 0 # 1 channel, 32-bit
or cfg.OptionalFeatureSupport != 0
)
if needs_reconfig:
cfg.FIFOMode = 0
cfg.ChannelConfig = 0
cfg.OptionalFeatureSupport = 0
self._dev.setChipConfiguration(cfg)
# Device re-enumerates — close stale handle, wait, re-open
self._dev.close()
self._dev = None
import time
time.sleep(2.0) # wait for USB re-enumeration
self._dev = ftd3xx.create(device_index, ftd3xx.OPEN_BY_INDEX)
if self._dev is None:
log.error("FT601 not found after reconfiguration")
return False
log.info("FT601 reconfigured and re-opened (index %d)", device_index)
self.is_open = True
log.info("FT601 device opened (index %d)", device_index)
return True
except (OSError, _Ftd3xxError) as e:
log.error("FT601 open failed: %s", e)
self._dev = None
return False
def close(self):
if self._dev is not None:
with contextlib.suppress(Exception):
self._dev.close()
self._dev = None
self.is_open = False
def read(self, size: int = 4096) -> bytes | None:
"""Read raw bytes from FT601. Returns None on error/timeout."""
if not self.is_open:
return None
if self._mock:
return self._mock_read(size)
with self._lock:
try:
data = self._dev.readPipe(0x82, size, raw=True)
return bytes(data) if data else None
except (OSError, _Ftd3xxError) as e:
log.error("FT601 read error: %s", e)
return None
def write(self, data: bytes) -> bool:
"""Write raw bytes to FT601. Data must be 4-byte aligned for 32-bit bus."""
if not self.is_open:
return False
if self._mock:
log.info(f"FT601 mock write: {data.hex()}")
return True
# Pad to 4-byte alignment (FT601 32-bit bus requirement).
# NOTE: Radar commands are already 4 bytes, so this should be a no-op.
remainder = len(data) % 4
if remainder:
data = data + b"\x00" * (4 - remainder)
with self._lock:
try:
written = self._dev.writePipe(0x02, data, raw=True)
return written == len(data)
except (OSError, _Ftd3xxError) as e:
log.error("FT601 write error: %s", e)
return False
def _mock_read(self, size: int) -> bytes:
"""Generate synthetic radar packets (same pattern as FT2232H mock)."""
time.sleep(0.05)
self._mock_frame_num += 1
buf = bytearray()
num_packets = min(NUM_CELLS, size // DATA_PACKET_SIZE)
start_idx = getattr(self, "_mock_seq_idx", 0)
for n in range(num_packets):
idx = (start_idx + n) % NUM_CELLS
rbin = idx // NUM_DOPPLER_BINS
dbin = idx % NUM_DOPPLER_BINS
range_i = int(self._mock_rng.normal(0, 100))
range_q = int(self._mock_rng.normal(0, 100))
if abs(rbin - 20) < 3:
range_i += 5000
range_q += 3000
dop_i = int(self._mock_rng.normal(0, 50))
dop_q = int(self._mock_rng.normal(0, 50))
if abs(rbin - 20) < 3 and abs(dbin - 8) < 2:
dop_i += 8000
dop_q += 4000
detection = 1 if (abs(rbin - 20) < 2 and abs(dbin - 8) < 2) else 0
pkt = bytearray()
pkt.append(HEADER_BYTE)
pkt += struct.pack(">h", np.clip(range_q, -32768, 32767))
pkt += struct.pack(">h", np.clip(range_i, -32768, 32767))
pkt += struct.pack(">h", np.clip(dop_i, -32768, 32767))
pkt += struct.pack(">h", np.clip(dop_q, -32768, 32767))
# Bit 7 = frame_start (sample_counter == 0), bit 0 = detection
det_byte = (detection & 0x01) | (0x80 if idx == 0 else 0x00)
pkt.append(det_byte)
pkt.append(FOOTER_BYTE)
buf += pkt
@@ -600,6 +788,12 @@ class RadarAcquisition(threading.Thread):
if sample.get("detection", 0):
self._frame.detections[rbin, dbin] = 1
self._frame.detection_count += 1
# Accumulate FPGA range profile data (matched-filter output)
# Each sample carries the range_i/range_q for this range bin.
# Accumulate magnitude across Doppler bins for the range profile.
ri = int(sample.get("range_i", 0))
rq = int(sample.get("range_q", 0))
self._frame.range_profile[rbin] += abs(ri) + abs(rq)
self._sample_idx += 1
@@ -607,11 +801,11 @@ class RadarAcquisition(threading.Thread):
self._finalize_frame()
def _finalize_frame(self):
"""Complete frame: compute range profile, push to queue, record."""
"""Complete frame: push to queue, record."""
self._frame.timestamp = time.time()
self._frame.frame_number = self._frame_num
# Range profile = sum of magnitude across Doppler bins
self._frame.range_profile = np.sum(self._frame.magnitude, axis=1)
# range_profile is already accumulated from FPGA range_i/range_q
# data in _ingest_sample(). No need to synthesize from doppler magnitude.
# Push to display queue (drop old if backed up)
try:
9_Firmware/9_3_GUI/test_GUI_V65_Tk.py
+56 -1
View File
@@ -16,7 +16,7 @@ import unittest
import numpy as np
from radar_protocol import (
RadarProtocol, FT2232HConnection, DataRecorder, RadarAcquisition,
RadarProtocol, FT2232HConnection, FT601Connection, DataRecorder, RadarAcquisition,
RadarFrame, StatusResponse, Opcode,
HEADER_BYTE, FOOTER_BYTE, STATUS_HEADER_BYTE,
NUM_RANGE_BINS, NUM_DOPPLER_BINS,
@@ -312,6 +312,61 @@ class TestFT2232HConnection(unittest.TestCase):
self.assertFalse(conn.write(b"\x00\x00\x00\x00"))
class TestFT601Connection(unittest.TestCase):
"""Test mock FT601 connection (mirrors FT2232H tests)."""
def test_mock_open_close(self):
conn = FT601Connection(mock=True)
self.assertTrue(conn.open())
self.assertTrue(conn.is_open)
conn.close()
self.assertFalse(conn.is_open)
def test_mock_read_returns_data(self):
conn = FT601Connection(mock=True)
conn.open()
data = conn.read(4096)
self.assertIsNotNone(data)
self.assertGreater(len(data), 0)
conn.close()
def test_mock_read_contains_valid_packets(self):
"""Mock data should contain parseable data packets."""
conn = FT601Connection(mock=True)
conn.open()
raw = conn.read(4096)
packets = RadarProtocol.find_packet_boundaries(raw)
self.assertGreater(len(packets), 0)
for start, end, ptype in packets:
if ptype == "data":
result = RadarProtocol.parse_data_packet(raw[start:end])
self.assertIsNotNone(result)
conn.close()
def test_mock_write(self):
conn = FT601Connection(mock=True)
conn.open()
cmd = RadarProtocol.build_command(0x01, 1)
self.assertTrue(conn.write(cmd))
conn.close()
def test_write_pads_to_4_bytes(self):
"""FT601 write() should pad data to 4-byte alignment."""
conn = FT601Connection(mock=True)
conn.open()
# 3-byte payload should be padded internally (no error)
self.assertTrue(conn.write(b"\x01\x02\x03"))
conn.close()
def test_read_when_closed(self):
conn = FT601Connection(mock=True)
self.assertIsNone(conn.read())
def test_write_when_closed(self):
conn = FT601Connection(mock=True)
self.assertFalse(conn.write(b"\x00\x00\x00\x00"))
class TestDataRecorder(unittest.TestCase):
"""Test HDF5 recording (skipped if h5py not available)."""
9_Firmware/9_3_GUI/test_v7.py
+16 -14
View File
@@ -65,9 +65,9 @@ class TestRadarSettings(unittest.TestCase):
def test_defaults(self):
s = _models().RadarSettings()
self.assertEqual(s.system_frequency, 10e9)
self.assertEqual(s.coverage_radius, 50000)
self.assertEqual(s.max_distance, 50000)
self.assertEqual(s.system_frequency, 10.5e9)
self.assertEqual(s.coverage_radius, 1536)
self.assertEqual(s.max_distance, 1536)
class TestGPSData(unittest.TestCase):
@@ -425,26 +425,28 @@ class TestWaveformConfig(unittest.TestCase):
def test_defaults(self):
from v7.models import WaveformConfig
wc = WaveformConfig()
self.assertEqual(wc.sample_rate_hz, 4e6)
self.assertEqual(wc.bandwidth_hz, 500e6)
self.assertEqual(wc.chirp_duration_s, 300e-6)
self.assertEqual(wc.center_freq_hz, 10.525e9)
self.assertEqual(wc.sample_rate_hz, 100e6)
self.assertEqual(wc.bandwidth_hz, 20e6)
self.assertEqual(wc.chirp_duration_s, 30e-6)
self.assertEqual(wc.pri_s, 167e-6)
self.assertEqual(wc.center_freq_hz, 10.5e9)
self.assertEqual(wc.n_range_bins, 64)
self.assertEqual(wc.n_doppler_bins, 32)
self.assertEqual(wc.chirps_per_subframe, 16)
self.assertEqual(wc.fft_size, 1024)
self.assertEqual(wc.decimation_factor, 16)
def test_range_resolution(self):
"""range_resolution_m should be ~5.62 m/bin with ADI defaults."""
"""range_resolution_m should be ~23.98 m/bin (matched filter, 100 MSPS)."""
from v7.models import WaveformConfig
wc = WaveformConfig()
self.assertAlmostEqual(wc.range_resolution_m, 5.621, places=1)
self.assertAlmostEqual(wc.range_resolution_m, 23.983, places=1)
def test_velocity_resolution(self):
"""velocity_resolution_mps should be ~1.484 m/s/bin."""
"""velocity_resolution_mps should be ~5.34 m/s/bin (PRI=167us, 16 chirps)."""
from v7.models import WaveformConfig
wc = WaveformConfig()
self.assertAlmostEqual(wc.velocity_resolution_mps, 1.484, places=2)
self.assertAlmostEqual(wc.velocity_resolution_mps, 5.343, places=1)
def test_max_range(self):
"""max_range_m = range_resolution * n_range_bins."""
@@ -466,7 +468,7 @@ class TestWaveformConfig(unittest.TestCase):
"""Non-default parameters correctly change derived values."""
from v7.models import WaveformConfig
wc1 = WaveformConfig()
wc2 = WaveformConfig(bandwidth_hz=1e9) # double BW → halve range res
wc2 = WaveformConfig(sample_rate_hz=200e6) # double Fs → halve range bin
self.assertAlmostEqual(wc2.range_resolution_m, wc1.range_resolution_m / 2, places=2)
def test_zero_center_freq_velocity(self):
@@ -925,9 +927,9 @@ class TestExtractTargetsFromFrame(unittest.TestCase):
"""Detection at range bin 10 → range = 10 * range_resolution."""
from v7.processing import extract_targets_from_frame
frame = self._make_frame(det_cells=[(10, 16)]) # dbin=16 = center → vel=0
targets = extract_targets_from_frame(frame, range_resolution=5.621)
targets = extract_targets_from_frame(frame, range_resolution=23.983)
self.assertEqual(len(targets), 1)
self.assertAlmostEqual(targets[0].range, 10 * 5.621, places=2)
self.assertAlmostEqual(targets[0].range, 10 * 23.983, places=1)
self.assertAlmostEqual(targets[0].velocity, 0.0, places=2)
def test_velocity_sign(self):
9_Firmware/9_3_GUI/v7/__init__.py
+2 -1
View File
@@ -26,6 +26,7 @@ from .models import (
# Hardware interfaces — production protocol via radar_protocol.py
from .hardware import (
FT2232HConnection,
FT601Connection,
RadarProtocol,
Opcode,
RadarAcquisition,
@@ -89,7 +90,7 @@ __all__ = [ # noqa: RUF022
"USB_AVAILABLE", "FTDI_AVAILABLE", "SCIPY_AVAILABLE",
"SKLEARN_AVAILABLE", "FILTERPY_AVAILABLE",
# hardware — production FPGA protocol
"FT2232HConnection", "RadarProtocol", "Opcode",
"FT2232HConnection", "FT601Connection", "RadarProtocol", "Opcode",
"RadarAcquisition", "RadarFrame", "StatusResponse", "DataRecorder",
"STM32USBInterface",
# processing
9_Firmware/9_3_GUI/v7/dashboard.py
+39 -10
View File
@@ -13,13 +13,14 @@ RadarDashboard is a QMainWindow with six tabs:
6. Settings — Host-side DSP parameters + About section
Uses production radar_protocol.py for all FPGA communication:
- FT2232HConnection for real hardware
- FT2232HConnection for production board (FT2232H USB 2.0)
- FT601Connection for premium board (FT601 USB 3.0) — selectable from GUI
- Unified replay via SoftwareFPGA + ReplayEngine + ReplayWorker
- Mock mode (FT2232HConnection(mock=True)) for development
The old STM32 magic-packet start flow has been removed. FPGA registers
are controlled directly via 4-byte {opcode, addr, value_hi, value_lo}
commands sent over FT2232H.
commands sent over FT2232H or FT601.
"""
from __future__ import annotations
@@ -55,6 +56,7 @@ from .models import (
)
from .hardware import (
FT2232HConnection,
FT601Connection,
RadarProtocol,
RadarFrame,
StatusResponse,
@@ -142,7 +144,7 @@ class RadarDashboard(QMainWindow):
)
# Hardware interfaces — production protocol
self._connection: FT2232HConnection | None = None
self._connection: FT2232HConnection | FT601Connection | None = None
self._stm32 = STM32USBInterface()
self._recorder = DataRecorder()
@@ -364,7 +366,7 @@ class RadarDashboard(QMainWindow):
# Row 0: connection mode + device combos + buttons
ctrl_layout.addWidget(QLabel("Mode:"), 0, 0)
self._mode_combo = QComboBox()
self._mode_combo.addItems(["Mock", "Live FT2232H", "Replay"])
self._mode_combo.addItems(["Mock", "Live", "Replay"])
self._mode_combo.setCurrentIndex(0)
ctrl_layout.addWidget(self._mode_combo, 0, 1)
@@ -377,6 +379,13 @@ class RadarDashboard(QMainWindow):
refresh_btn.clicked.connect(self._refresh_devices)
ctrl_layout.addWidget(refresh_btn, 0, 4)
# USB Interface selector (production FT2232H / premium FT601)
ctrl_layout.addWidget(QLabel("USB Interface:"), 0, 5)
self._usb_iface_combo = QComboBox()
self._usb_iface_combo.addItems(["FT2232H (Production)", "FT601 (Premium)"])
self._usb_iface_combo.setCurrentIndex(0)
ctrl_layout.addWidget(self._usb_iface_combo, 0, 6)
self._start_btn = QPushButton("Start Radar")
self._start_btn.setStyleSheet(
f"QPushButton {{ background-color: {DARK_SUCCESS}; color: white; font-weight: bold; }}"
@@ -1001,7 +1010,8 @@ class RadarDashboard(QMainWindow):
self._conn_ft2232h = self._make_status_label("FT2232H")
self._conn_stm32 = self._make_status_label("STM32 USB")
conn_layout.addWidget(QLabel("FT2232H:"), 0, 0)
self._conn_usb_label = QLabel("USB Data:")
conn_layout.addWidget(self._conn_usb_label, 0, 0)
conn_layout.addWidget(self._conn_ft2232h, 0, 1)
conn_layout.addWidget(QLabel("STM32 USB:"), 1, 0)
conn_layout.addWidget(self._conn_stm32, 1, 1)
@@ -1167,7 +1177,7 @@ class RadarDashboard(QMainWindow):
about_lbl = QLabel(
"<b>AERIS-10 Radar System V7</b><br>"
"PyQt6 Edition with Embedded Leaflet Map<br><br>"
"<b>Data Interface:</b> FT2232H USB 2.0 (production protocol)<br>"
"<b>Data Interface:</b> FT2232H USB 2.0 (production) / FT601 USB 3.0 (premium)<br>"
"<b>FPGA Protocol:</b> 4-byte register commands, 0xAA/0xBB packets<br>"
"<b>Map:</b> OpenStreetMap + Leaflet.js<br>"
"<b>Framework:</b> PyQt6 + QWebEngine<br>"
@@ -1224,7 +1234,7 @@ class RadarDashboard(QMainWindow):
# =====================================================================
def _send_fpga_cmd(self, opcode: int, value: int):
"""Send a 4-byte register command to the FPGA via FT2232H."""
"""Send a 4-byte register command to the FPGA via USB (FT2232H or FT601)."""
if self._connection is None or not self._connection.is_open:
logger.warning(f"Cannot send 0x{opcode:02X}={value}: no connection")
return
@@ -1287,16 +1297,26 @@ class RadarDashboard(QMainWindow):
if "Mock" in mode:
self._replay_mode = False
self._connection = FT2232HConnection(mock=True)
iface = self._usb_iface_combo.currentText()
if "FT601" in iface:
self._connection = FT601Connection(mock=True)
else:
self._connection = FT2232HConnection(mock=True)
if not self._connection.open():
QMessageBox.critical(self, "Error", "Failed to open mock connection.")
return
elif "Live" in mode:
self._replay_mode = False
self._connection = FT2232HConnection(mock=False)
iface = self._usb_iface_combo.currentText()
if "FT601" in iface:
self._connection = FT601Connection(mock=False)
iface_name = "FT601"
else:
self._connection = FT2232HConnection(mock=False)
iface_name = "FT2232H"
if not self._connection.open():
QMessageBox.critical(self, "Error",
"Failed to open FT2232H. Check USB connection.")
f"Failed to open {iface_name}. Check USB connection.")
return
elif "Replay" in mode:
self._replay_mode = True
@@ -1368,6 +1388,7 @@ class RadarDashboard(QMainWindow):
self._start_btn.setEnabled(False)
self._stop_btn.setEnabled(True)
self._mode_combo.setEnabled(False)
self._usb_iface_combo.setEnabled(False)
self._demo_btn_main.setEnabled(False)
self._demo_btn_map.setEnabled(False)
n_frames = self._replay_engine.total_frames
@@ -1417,6 +1438,7 @@ class RadarDashboard(QMainWindow):
self._start_btn.setEnabled(False)
self._stop_btn.setEnabled(True)
self._mode_combo.setEnabled(False)
self._usb_iface_combo.setEnabled(False)
self._demo_btn_main.setEnabled(False)
self._demo_btn_map.setEnabled(False)
self._status_label_main.setText(f"Status: Running ({mode})")
@@ -1462,6 +1484,7 @@ class RadarDashboard(QMainWindow):
self._start_btn.setEnabled(True)
self._stop_btn.setEnabled(False)
self._mode_combo.setEnabled(True)
self._usb_iface_combo.setEnabled(True)
self._demo_btn_main.setEnabled(True)
self._demo_btn_map.setEnabled(True)
self._status_label_main.setText("Status: Radar stopped")
@@ -1954,6 +1977,12 @@ class RadarDashboard(QMainWindow):
self._set_conn_indicator(self._conn_ft2232h, conn_open)
self._set_conn_indicator(self._conn_stm32, self._stm32.is_open)
# Update USB label to reflect which interface is active
if isinstance(self._connection, FT601Connection):
self._conn_usb_label.setText("FT601:")
else:
self._conn_usb_label.setText("FT2232H:")
gps_count = self._gps_packet_count
if self._gps_worker:
gps_count = self._gps_worker.gps_count
9_Firmware/9_3_GUI/v7/hardware.py
+4 -2
View File
@@ -25,6 +25,7 @@ if USB_AVAILABLE:
sys.path.insert(0, os.path.join(os.path.dirname(__file__), ".."))
from radar_protocol import ( # noqa: F401 — re-exported for v7 package
FT2232HConnection,
FT601Connection,
RadarProtocol,
Opcode,
RadarAcquisition,
@@ -46,8 +47,9 @@ class STM32USBInterface:
Used ONLY for receiving GPS data from the MCU.
FPGA register commands are sent via FT2232H (see FT2232HConnection
from radar_protocol.py). The old send_start_flag() / send_settings()
FPGA register commands are sent via the USB data interface — either
FT2232HConnection (production) or FT601Connection (premium), both
from radar_protocol.py. The old send_start_flag() / send_settings()
methods have been removed — they used an incompatible magic-packet
protocol that the FPGA does not understand.
"""
9_Firmware/9_3_GUI/v7/map_widget.py
+1 -1
View File
@@ -98,7 +98,7 @@ class RadarMapWidget(QWidget):
)
self._targets: list[RadarTarget] = []
self._pending_targets: list[RadarTarget] | None = None
self._coverage_radius = 50_000 # metres
self._coverage_radius = 1_536 # metres (64 bins x ~24 m/bin)
self._tile_server = TileServer.OPENSTREETMAP
self._show_coverage = True
self._show_trails = False
9_Firmware/9_3_GUI/v7/models.py
+29 -22
View File
@@ -108,12 +108,12 @@ class RadarSettings:
range_resolution and velocity_resolution should be calibrated to
the actual waveform parameters.
"""
system_frequency: float = 10e9 # Hz (carrier, used for velocity calc)
range_resolution: float = 781.25 # Meters per range bin (default: 50km/64)
velocity_resolution: float = 1.0 # m/s per Doppler bin (calibrate to waveform)
max_distance: float = 50000 # Max detection range (m)
map_size: float = 50000 # Map display size (m)
coverage_radius: float = 50000 # Map coverage radius (m)
system_frequency: float = 10.5e9 # Hz (carrier, used for velocity calc)
range_resolution: float = 24.0 # Meters per range bin (c/(2*Fs)*decim)
velocity_resolution: float = 1.0 # m/s per Doppler bin (calibrate to waveform)
max_distance: float = 1536 # Max detection range (m)
map_size: float = 2000 # Map display size (m)
coverage_radius: float = 1536 # Map coverage radius (m)
@dataclass
@@ -199,39 +199,46 @@ class WaveformConfig:
Encapsulates the radar waveform so that range/velocity resolution
can be derived automatically instead of hardcoded in RadarSettings.
Defaults match the ADI CN0566 Phaser capture parameters used in
the golden_reference cosim (4 MSPS, 500 MHz BW, 300 us chirp).
Defaults match the AERIS-10 production system parameters from
radar_scene.py / plfm_chirp_controller.v:
100 MSPS DDC output, 20 MHz chirp BW, 30 us long chirp,
167 us long-chirp PRI, X-band 10.5 GHz carrier.
"""
sample_rate_hz: float = 4e6 # ADC sample rate
bandwidth_hz: float = 500e6 # Chirp bandwidth
chirp_duration_s: float = 300e-6 # Chirp ramp time
center_freq_hz: float = 10.525e9 # Carrier frequency
sample_rate_hz: float = 100e6 # DDC output I/Q rate (matched filter input)
bandwidth_hz: float = 20e6 # Chirp bandwidth (not used in range calc;
# retained for time-bandwidth product / display)
chirp_duration_s: float = 30e-6 # Long chirp ramp time
pri_s: float = 167e-6 # Pulse repetition interval (chirp + listen)
center_freq_hz: float = 10.5e9 # Carrier frequency (radar_scene.py: F_CARRIER)
n_range_bins: int = 64 # After decimation
n_doppler_bins: int = 32 # After Doppler FFT
n_doppler_bins: int = 32 # Total Doppler bins (2 sub-frames x 16)
chirps_per_subframe: int = 16 # Chirps in one Doppler sub-frame
fft_size: int = 1024 # Pre-decimation FFT length
decimation_factor: int = 16 # 1024 → 64
@property
def range_resolution_m(self) -> float:
"""Meters per decimated range bin (FMCW deramped baseband).
"""Meters per decimated range bin (matched-filter pulse compression).
For deramped FMCW: bin spacing = c * Fs * T / (2 * N_FFT * BW).
After decimation the bin spacing grows by *decimation_factor*.
For FFT-based matched filtering, each IFFT output bin spans
c / (2 * Fs) in range, where Fs is the I/Q sample rate at the
matched-filter input (DDC output). After decimation the bin
spacing grows by *decimation_factor*.
"""
c = 299_792_458.0
raw_bin = (
c * self.sample_rate_hz * self.chirp_duration_s
/ (2.0 * self.fft_size * self.bandwidth_hz)
)
raw_bin = c / (2.0 * self.sample_rate_hz)
return raw_bin * self.decimation_factor
@property
def velocity_resolution_mps(self) -> float:
"""m/s per Doppler bin. lambda / (2 * n_doppler * chirp_duration)."""
"""m/s per Doppler bin.
lambda / (2 * chirps_per_subframe * PRI), matching radar_scene.py.
"""
c = 299_792_458.0
wavelength = c / self.center_freq_hz
return wavelength / (2.0 * self.n_doppler_bins * self.chirp_duration_s)
return wavelength / (2.0 * self.chirps_per_subframe * self.pri_s)
@property
def max_range_m(self) -> float:
9_Firmware/9_3_GUI/v7/workers.py
+2 -2
View File
@@ -334,7 +334,7 @@ class TargetSimulator(QObject):
self._add_random_target()
def _add_random_target(self):
range_m = random.uniform(5000, 40000)
range_m = random.uniform(50, 1400)
azimuth = random.uniform(0, 360)
velocity = random.uniform(-100, 100)
elevation = random.uniform(-5, 45)
@@ -368,7 +368,7 @@ class TargetSimulator(QObject):
for t in self._targets:
new_range = t.range - t.velocity * 0.5
if new_range < 500 or new_range > 50000:
if new_range < 10 or new_range > 1536:
continue # target exits coverage — drop it
new_vel = max(-150, min(150, t.velocity + random.uniform(-2, 2)))
9_Firmware/tests/cross_layer/adar1000_vm_reference.py
+216
View File
@@ -0,0 +1,216 @@
"""ADAR1000 vector-modulator ground-truth table and firmware parser.
This module is a pure data + helpers library imported by the cross-layer
test suite (`9_Firmware/tests/cross_layer/test_cross_layer_contract.py`,
class `TestTier2Adar1000VmTableGroundTruth`). It has no CLI entry point
and no side effects on import beyond the structural assertion on the
table length.
Ground-truth source
-------------------
The 128-entry `(I, Q)` byte pairs below are transcribed from the ADAR1000
datasheet Rev. B, Tables 13-16, page 34 ("Phase Shifter Programming"),
which is the primary normative reference. The same values appear in the
Analog Devices Linux beamformer driver
(`drivers/iio/beamformer/adar1000.c`, `adar1000_phase_values[]`) and were
cross-checked against that driver as a secondary, independent
transcription. The byte values are factual data (5-bit unsigned magnitude
in bits[4:0], polarity bit at bit[5], bits[7:6] reserved zero); no
copyrightable creative expression. Only the datasheet is the
licensing-relevant source.
PLFM_RADAR firmware indexing convention
---------------------------------------
`adarSetRxPhase` / `adarSetTxPhase` in
`9_Firmware/9_1_Microcontroller/9_1_1_C_Cpp_Libraries/ADAR1000_Manager.cpp`
write `VM_I[phase % 128]` and `VM_Q[phase % 128]` to the chip. Each index
N corresponds to commanded beam phase `N * 360/128 = N * 2.8125 deg`. The
ADI table is also on a uniform 2.8125 deg grid (verified by
`check_uniform_2p8125_deg_step` below), so a 1:1 mapping is correct:
PLFM index N == ADI table row N.
"""
from __future__ import annotations
import re
# ----------------------------------------------------------------------------
# Ground truth: ADAR1000 datasheet Rev. B Tables 13-16 p.34
# Each entry: (angle_int_deg, angle_frac_x10000, vm_byte_I, vm_byte_Q)
# ----------------------------------------------------------------------------
GROUND_TRUTH: list[tuple[int, int, int, int]] = [
(0, 0, 0x3F, 0x20), (2, 8125, 0x3F, 0x21), (5, 6250, 0x3F, 0x23),
(8, 4375, 0x3F, 0x24), (11, 2500, 0x3F, 0x26), (14, 625, 0x3E, 0x27),
(16, 8750, 0x3E, 0x28), (19, 6875, 0x3D, 0x2A), (22, 5000, 0x3D, 0x2B),
(25, 3125, 0x3C, 0x2D), (28, 1250, 0x3C, 0x2E), (30, 9375, 0x3B, 0x2F),
(33, 7500, 0x3A, 0x30), (36, 5625, 0x39, 0x31), (39, 3750, 0x38, 0x33),
(42, 1875, 0x37, 0x34), (45, 0, 0x36, 0x35), (47, 8125, 0x35, 0x36),
(50, 6250, 0x34, 0x37), (53, 4375, 0x33, 0x38), (56, 2500, 0x32, 0x38),
(59, 625, 0x30, 0x39), (61, 8750, 0x2F, 0x3A), (64, 6875, 0x2E, 0x3A),
(67, 5000, 0x2C, 0x3B), (70, 3125, 0x2B, 0x3C), (73, 1250, 0x2A, 0x3C),
(75, 9375, 0x28, 0x3C), (78, 7500, 0x27, 0x3D), (81, 5625, 0x25, 0x3D),
(84, 3750, 0x24, 0x3D), (87, 1875, 0x22, 0x3D), (90, 0, 0x21, 0x3D),
(92, 8125, 0x01, 0x3D), (95, 6250, 0x03, 0x3D), (98, 4375, 0x04, 0x3D),
(101, 2500, 0x06, 0x3D), (104, 625, 0x07, 0x3C), (106, 8750, 0x08, 0x3C),
(109, 6875, 0x0A, 0x3C), (112, 5000, 0x0B, 0x3B), (115, 3125, 0x0D, 0x3A),
(118, 1250, 0x0E, 0x3A), (120, 9375, 0x0F, 0x39), (123, 7500, 0x11, 0x38),
(126, 5625, 0x12, 0x38), (129, 3750, 0x13, 0x37), (132, 1875, 0x14, 0x36),
(135, 0, 0x16, 0x35), (137, 8125, 0x17, 0x34), (140, 6250, 0x18, 0x33),
(143, 4375, 0x19, 0x31), (146, 2500, 0x19, 0x30), (149, 625, 0x1A, 0x2F),
(151, 8750, 0x1B, 0x2E), (154, 6875, 0x1C, 0x2D), (157, 5000, 0x1C, 0x2B),
(160, 3125, 0x1D, 0x2A), (163, 1250, 0x1E, 0x28), (165, 9375, 0x1E, 0x27),
(168, 7500, 0x1E, 0x26), (171, 5625, 0x1F, 0x24), (174, 3750, 0x1F, 0x23),
(177, 1875, 0x1F, 0x21), (180, 0, 0x1F, 0x20), (182, 8125, 0x1F, 0x01),
(185, 6250, 0x1F, 0x03), (188, 4375, 0x1F, 0x04), (191, 2500, 0x1F, 0x06),
(194, 625, 0x1E, 0x07), (196, 8750, 0x1E, 0x08), (199, 6875, 0x1D, 0x0A),
(202, 5000, 0x1D, 0x0B), (205, 3125, 0x1C, 0x0D), (208, 1250, 0x1C, 0x0E),
(210, 9375, 0x1B, 0x0F), (213, 7500, 0x1A, 0x10), (216, 5625, 0x19, 0x11),
(219, 3750, 0x18, 0x13), (222, 1875, 0x17, 0x14), (225, 0, 0x16, 0x15),
(227, 8125, 0x15, 0x16), (230, 6250, 0x14, 0x17), (233, 4375, 0x13, 0x18),
(236, 2500, 0x12, 0x18), (239, 625, 0x10, 0x19), (241, 8750, 0x0F, 0x1A),
(244, 6875, 0x0E, 0x1A), (247, 5000, 0x0C, 0x1B), (250, 3125, 0x0B, 0x1C),
(253, 1250, 0x0A, 0x1C), (255, 9375, 0x08, 0x1C), (258, 7500, 0x07, 0x1D),
(261, 5625, 0x05, 0x1D), (264, 3750, 0x04, 0x1D), (267, 1875, 0x02, 0x1D),
(270, 0, 0x01, 0x1D), (272, 8125, 0x21, 0x1D), (275, 6250, 0x23, 0x1D),
(278, 4375, 0x24, 0x1D), (281, 2500, 0x26, 0x1D), (284, 625, 0x27, 0x1C),
(286, 8750, 0x28, 0x1C), (289, 6875, 0x2A, 0x1C), (292, 5000, 0x2B, 0x1B),
(295, 3125, 0x2D, 0x1A), (298, 1250, 0x2E, 0x1A), (300, 9375, 0x2F, 0x19),
(303, 7500, 0x31, 0x18), (306, 5625, 0x32, 0x18), (309, 3750, 0x33, 0x17),
(312, 1875, 0x34, 0x16), (315, 0, 0x36, 0x15), (317, 8125, 0x37, 0x14),
(320, 6250, 0x38, 0x13), (323, 4375, 0x39, 0x11), (326, 2500, 0x39, 0x10),
(329, 625, 0x3A, 0x0F), (331, 8750, 0x3B, 0x0E), (334, 6875, 0x3C, 0x0D),
(337, 5000, 0x3C, 0x0B), (340, 3125, 0x3D, 0x0A), (343, 1250, 0x3E, 0x08),
(345, 9375, 0x3E, 0x07), (348, 7500, 0x3E, 0x06), (351, 5625, 0x3F, 0x04),
(354, 3750, 0x3F, 0x03), (357, 1875, 0x3F, 0x01),
]
assert len(GROUND_TRUTH) == 128, f"GROUND_TRUTH must have 128 entries, has {len(GROUND_TRUTH)}"
VM_I_REF: list[int] = [row[2] for row in GROUND_TRUTH]
VM_Q_REF: list[int] = [row[3] for row in GROUND_TRUTH]
# ----------------------------------------------------------------------------
# Structural-invariant checks on the embedded ground-truth transcription.
# These defend against typos during the copy-paste from the datasheet / ADI
# driver. Each function returns a list of error strings (empty == pass) so
# callers (the pytest class) can assert-on-empty with a useful message.
# ----------------------------------------------------------------------------
def check_byte_format(label: str, table: list[int]) -> list[str]:
"""Each byte must have bits[7:6] == 0 (reserved)."""
errors = []
for i, byte in enumerate(table):
if byte & 0xC0:
errors.append(f"{label}[{i}]=0x{byte:02X}: reserved bits[7:6] non-zero")
return errors
def check_uniform_2p8125_deg_step() -> list[str]:
"""Angles must form a uniform 2.8125 deg grid: angle[N] == N * 2.8125."""
errors = []
for i, (deg_int, deg_frac, _, _) in enumerate(GROUND_TRUTH):
# angle in units of 1/10000 degree; 2.8125 deg = 28125/10000 exactly
angle_e4 = deg_int * 10000 + deg_frac
expected_e4 = i * 28125
if angle_e4 != expected_e4:
errors.append(
f"GROUND_TRUTH[{i}]: angle {deg_int}.{deg_frac:04d} deg "
f"(={angle_e4}/10000) != expected {expected_e4}/10000 "
f"(=i*2.8125)"
)
return errors
def check_quadrant_symmetry() -> list[str]:
"""Angle and angle+180 deg must have inverted polarity bits but identical
magnitudes. Index offset 64 corresponds to 180 deg on the 128-step grid.
Exemption: when magnitude is zero the polarity bit is physically
meaningless (sign of zero is undefined for the IQ phasor projection).
The datasheet uses POL=1 for both 0 and 180 deg Q components (both
encode Q=0). Skip the polarity assertion for zero-magnitude entries.
"""
errors = []
POL = 0x20
MAG = 0x1F
for i in range(64):
j = i + 64
mag_i_a, mag_i_b = VM_I_REF[i] & MAG, VM_I_REF[j] & MAG
if mag_i_a != mag_i_b:
errors.append(
f"VM_I[{i}]=0x{VM_I_REF[i]:02X} vs VM_I[{j}]=0x{VM_I_REF[j]:02X}: "
f"180 deg pair has different magnitude"
)
if mag_i_a != 0 and (VM_I_REF[i] & POL) == (VM_I_REF[j] & POL):
errors.append(
f"VM_I[{i}]=0x{VM_I_REF[i]:02X} vs VM_I[{j}]=0x{VM_I_REF[j]:02X}: "
f"180 deg pair has same polarity (should be inverted, mag={mag_i_a})"
)
mag_q_a, mag_q_b = VM_Q_REF[i] & MAG, VM_Q_REF[j] & MAG
if mag_q_a != mag_q_b:
errors.append(
f"VM_Q[{i}]=0x{VM_Q_REF[i]:02X} vs VM_Q[{j}]=0x{VM_Q_REF[j]:02X}: "
f"180 deg pair has different magnitude"
)
if mag_q_a != 0 and (VM_Q_REF[i] & POL) == (VM_Q_REF[j] & POL):
errors.append(
f"VM_Q[{i}]=0x{VM_Q_REF[i]:02X} vs VM_Q[{j}]=0x{VM_Q_REF[j]:02X}: "
f"180 deg pair has same polarity (should be inverted, mag={mag_q_a})"
)
return errors
def check_cardinal_points() -> list[str]:
"""Spot-check cardinal phase points against datasheet expectations."""
errors = []
expectations = [
(0, 0x3F, 0x20, "0 deg: max +I, ~zero Q"),
(32, 0x21, 0x3D, "90 deg: ~zero I, max +Q"),
(64, 0x1F, 0x20, "180 deg: max -I, ~zero Q"),
(96, 0x01, 0x1D, "270 deg: ~zero I, max -Q"),
]
for idx, exp_i, exp_q, desc in expectations:
if VM_I_REF[idx] != exp_i or VM_Q_REF[idx] != exp_q:
errors.append(
f"index {idx} ({desc}): expected (0x{exp_i:02X}, 0x{exp_q:02X}), "
f"got (0x{VM_I_REF[idx]:02X}, 0x{VM_Q_REF[idx]:02X})"
)
return errors
# ----------------------------------------------------------------------------
# Parse VM_I[] / VM_Q[] from firmware C++ source.
# ----------------------------------------------------------------------------
ARRAY_RE = re.compile(
r"const\s+uint8_t\s+ADAR1000Manager::(?P<name>VM_I|VM_Q|VM_GAIN)\s*"
r"\[\s*128\s*\]\s*=\s*\{(?P<body>[^}]*)\}\s*;",
re.DOTALL,
)
HEX_RE = re.compile(r"0[xX][0-9a-fA-F]{1,2}")
def parse_array(source: str, name: str) -> list[int] | None:
"""Extract a 128-entry uint8_t array from C++ source by name.
Returns None if the array is not found. Returns a list (possibly shorter
than 128) of the parsed bytes if found; caller is responsible for length
validation.
LIMITATION (intentional, see PR fix/adar1000-vm-tables review finding #2):
ARRAY_RE uses `[^}]*` for the body, which terminates at the first `}`.
This is sufficient for the *flat* `const uint8_t NAME[128] = { ... };`
declarations VM_I/VM_Q use today, but it would mis-parse if the array
body ever contained nested braces (e.g. designated initialisers, struct
aggregates, or macro-expansions producing braces). If the firmware ever
needs such a form for the VM tables, replace ARRAY_RE with a balanced
brace-counting parser. Until then, the current regex is preferred for
its simplicity and the round-trip tests will catch any silent breakage.
"""
for m in ARRAY_RE.finditer(source):
if m.group("name") != name:
continue
body = m.group("body")
body = re.sub(r"//[^\n]*", "", body)
body = re.sub(r"/\*.*?\*/", "", body, flags=re.DOTALL)
return [int(tok, 16) for tok in HEX_RE.findall(body)]
return None
9_Firmware/tests/cross_layer/contract_parser.py
+42 -9
View File
@@ -188,7 +188,7 @@ def parse_python_data_packet_fields(filepath: Path | None = None) -> list[DataPa
width_bits=size * 8
))
# Match detection = raw[9] & 0x01
# Match detection = raw[9] & 0x01 (direct access)
for m in re.finditer(r'(\w+)\s*=\s*raw\[(\d+)\]\s*&\s*(0x[0-9a-fA-F]+|\d+)', body):
name = m.group(1)
offset = int(m.group(2))
@@ -196,6 +196,24 @@ def parse_python_data_packet_fields(filepath: Path | None = None) -> list[DataPa
name=name, byte_start=offset, byte_end=offset, width_bits=1
))
# Match intermediate variable pattern: var = raw[N], then field = var & MASK
for m in re.finditer(r'(\w+)\s*=\s*raw\[(\d+)\]', body):
var_name = m.group(1)
offset = int(m.group(2))
# Find fields derived from this intermediate variable
for m2 in re.finditer(
rf'(\w+)\s*=\s*(?:\({var_name}\s*>>\s*\d+\)\s*&|{var_name}\s*&)\s*'
r'(0x[0-9a-fA-F]+|\d+)',
body,
):
name = m2.group(1)
# Skip if already captured by direct raw[] access pattern
if not any(f.name == name for f in fields):
fields.append(DataPacketField(
name=name, byte_start=offset, byte_end=offset,
width_bits=1
))
fields.sort(key=lambda f: f.byte_start)
return fields
@@ -584,12 +602,28 @@ def parse_verilog_data_mux(
for m in re.finditer(
r"5'd(\d+)\s*:\s*data_pkt_byte\s*=\s*(.+?);",
mux_body
mux_body, re.DOTALL
):
idx = int(m.group(1))
expr = m.group(2).strip()
entries.append((idx, expr))
# Helper: extract the dominant signal name from a mux expression.
# Handles direct refs like ``range_profile_cap[31:24]``, ternaries
# like ``stream_doppler_en ? doppler_real_cap[15:8] : 8'd0``, and
# concat-ternaries like ``stream_cfar_en ? {…, cfar_detection_cap} : …``.
def _extract_signal(expr: str) -> str | None:
# If it's a ternary, use the true-branch to find the data signal
tern = re.match(r'\w+\s*\?\s*(.+?)\s*:\s*.+', expr, re.DOTALL)
target = tern.group(1) if tern else expr
# Look for a known data signal (xxx_cap pattern or cfar_detection_cap)
cap_match = re.search(r'(\w+_cap)\b', target)
if cap_match:
return cap_match.group(1)
# Fall back to first identifier before a bit-select
sig_match = re.match(r'(\w+?)(?:\[|$)', target)
return sig_match.group(1) if sig_match else None
# Group consecutive bytes by signal root name
fields: list[DataPacketField] = []
i = 0
@@ -599,22 +633,21 @@ def parse_verilog_data_mux(
i += 1
continue
# Extract signal name (e.g., range_profile_cap from range_profile_cap[31:24])
sig_match = re.match(r'(\w+?)(?:\[|$)', expr)
if not sig_match:
signal = _extract_signal(expr)
if not signal:
i += 1
continue
signal = sig_match.group(1)
start_byte = idx
end_byte = idx
# Find consecutive bytes of the same signal
j = i + 1
while j < len(entries):
next_idx, next_expr = entries[j]
if next_expr.startswith(signal):
end_byte = next_idx
_next_idx, next_expr = entries[j]
next_sig = _extract_signal(next_expr)
if next_sig == signal:
end_byte = _next_idx
j += 1
else:
break
9_Firmware/tests/cross_layer/tb_cross_layer_ft2232h.v
+4 -2
View File
@@ -620,8 +620,10 @@ module tb_cross_layer_ft2232h;
"Data pkt: byte 7 = 0x56 (doppler_imag MSB)");
check(captured_bytes[8] === 8'h78,
"Data pkt: byte 8 = 0x78 (doppler_imag LSB)");
check(captured_bytes[9] === 8'h01,
"Data pkt: byte 9 = 0x01 (cfar_detection=1)");
// Byte 9 = {frame_start, 6'b0, cfar_detection}
// After reset sample_counter==0, so frame_start=1 → 0x81
check(captured_bytes[9] === 8'h81,
"Data pkt: byte 9 = 0x81 (frame_start=1, cfar_detection=1)");
check(captured_bytes[10] === 8'h55,
"Data pkt: byte 10 = 0x55 (footer)");

Some files were not shown because too many files have changed in this diff Show More