fix(xdc): add hold false_path for ADC IDDR + reorganize build scripts by target
- Add set_false_path -hold for source-synchronous ADC IDDR paths in adc_clk_mmcm.xdc (eliminates 8 hold violations from build 12) - Add DDR falling-edge input delay constraints to xc7a50t_ftg256.xdc (parity with 200T XDC) - Reorganize scripts/ into target subdirectories: 50t/, 200t/, te0712/, te0713/, utils/ so users can run the correct build for their hardware - Delete obsolete build scripts (build17-20) superseded by build_50t/200t - Update project_root paths in all moved scripts (.. -> ../..)
This commit is contained in:
Jason
@@ -0,0 +1,482 @@
|
||||
################################################################################
|
||||
# build_200t.tcl — XC7A200T Dev Board Build
|
||||
# AERIS-10 Build for the 200T development board (FBG484)
|
||||
#
|
||||
# Target: XC7A200T-2FBG484I
|
||||
# Design: radar_system_top
|
||||
#
|
||||
# Usage:
|
||||
# cd 9_Firmware/9_2_FPGA
|
||||
# vivado -mode batch -source scripts/200t/build_200t.tcl \
|
||||
# -log build/build.log -journal build/build.jou
|
||||
################################################################################
|
||||
|
||||
# ==============================================================================
|
||||
# 0. Configuration
|
||||
# ==============================================================================
|
||||
|
||||
set project_name "aeris10_radar"
|
||||
set script_dir [file dirname [file normalize [info script]]]
|
||||
set project_root [file normalize [file join $script_dir "../.."]]
|
||||
set project_dir [file join $project_root "build"]
|
||||
set rtl_dir $project_root
|
||||
set top_module "radar_system_top"
|
||||
set fpga_part "xc7a200tfbg484-2"
|
||||
set report_dir "${project_dir}/reports_build21"
|
||||
set sim_dir "${project_dir}/sim"
|
||||
set bitstream_dir "${project_dir}/bitstream"
|
||||
set build_tag "build21"
|
||||
|
||||
file mkdir $report_dir
|
||||
file mkdir $sim_dir
|
||||
file mkdir $bitstream_dir
|
||||
|
||||
# Record start time
|
||||
set build_start [clock seconds]
|
||||
set build_timestamp [clock format $build_start -format {%Y-%m-%d %H:%M:%S}]
|
||||
|
||||
puts "================================================================"
|
||||
puts " AERIS-10 Build 21: FFT Optimizations + E2E RTL Fixes"
|
||||
puts " Target: $fpga_part"
|
||||
puts " Top: $top_module"
|
||||
puts " Reports: $report_dir"
|
||||
puts " Started: $build_timestamp"
|
||||
puts "================================================================"
|
||||
|
||||
# ==============================================================================
|
||||
# 1. Project Creation + Source Files
|
||||
# ==============================================================================
|
||||
|
||||
create_project $project_name $project_dir -part $fpga_part -force
|
||||
set_property target_language Verilog [current_project]
|
||||
|
||||
# --- Add RTL sources ---
|
||||
set rtl_files [list \
|
||||
"${rtl_dir}/adc_clk_mmcm.v" \
|
||||
"${rtl_dir}/ad9484_interface_400m.v" \
|
||||
"${rtl_dir}/cdc_modules.v" \
|
||||
"${rtl_dir}/chirp_memory_loader_param.v" \
|
||||
"${rtl_dir}/cic_decimator_4x_enhanced.v" \
|
||||
"${rtl_dir}/dac_interface_single.v" \
|
||||
"${rtl_dir}/ddc_400m.v" \
|
||||
"${rtl_dir}/ddc_input_interface.v" \
|
||||
"${rtl_dir}/doppler_processor.v" \
|
||||
"${rtl_dir}/edge_detector.v" \
|
||||
"${rtl_dir}/fir_lowpass.v" \
|
||||
"${rtl_dir}/frequency_matched_filter.v" \
|
||||
"${rtl_dir}/latency_buffer.v" \
|
||||
"${rtl_dir}/matched_filter_multi_segment.v" \
|
||||
"${rtl_dir}/matched_filter_processing_chain.v" \
|
||||
"${rtl_dir}/nco_400m_enhanced.v" \
|
||||
"${rtl_dir}/plfm_chirp_controller.v" \
|
||||
"${rtl_dir}/radar_mode_controller.v" \
|
||||
"${rtl_dir}/radar_receiver_final.v" \
|
||||
"${rtl_dir}/radar_system_top.v" \
|
||||
"${rtl_dir}/radar_transmitter.v" \
|
||||
"${rtl_dir}/range_bin_decimator.v" \
|
||||
"${rtl_dir}/rx_gain_control.v" \
|
||||
"${rtl_dir}/mti_canceller.v" \
|
||||
"${rtl_dir}/cfar_ca.v" \
|
||||
"${rtl_dir}/fpga_self_test.v" \
|
||||
"${rtl_dir}/usb_data_interface.v" \
|
||||
"${rtl_dir}/xfft_16.v" \
|
||||
"${rtl_dir}/fft_engine.v" \
|
||||
]
|
||||
|
||||
set file_count 0
|
||||
foreach f $rtl_files {
|
||||
if {[file exists $f]} {
|
||||
add_files -norecurse $f
|
||||
incr file_count
|
||||
} else {
|
||||
puts " WARNING: RTL file not found: $f"
|
||||
}
|
||||
}
|
||||
puts " Added $file_count RTL files"
|
||||
|
||||
# Add .mem files for BRAM initialization
|
||||
set mem_files [glob -nocomplain "${rtl_dir}/*.mem"]
|
||||
foreach f $mem_files {
|
||||
add_files -norecurse $f
|
||||
puts " Added MEM: [file tail $f]"
|
||||
}
|
||||
|
||||
# Add constraints — main production XDC + MMCM supplementary XDC (FIXED)
|
||||
add_files -fileset constrs_1 -norecurse [file join $project_root "constraints" "xc7a200t_fbg484.xdc"]
|
||||
add_files -fileset constrs_1 -norecurse [file join $project_root "constraints" "adc_clk_mmcm.xdc"]
|
||||
|
||||
set_property top $top_module [current_fileset]
|
||||
set_property verilog_define {FFT_XPM_BRAM} [current_fileset]
|
||||
|
||||
# ==============================================================================
|
||||
# 2. Synthesis
|
||||
# ==============================================================================
|
||||
|
||||
puts ""
|
||||
puts "================================================================"
|
||||
puts " Phase 1/5: Synthesis"
|
||||
puts "================================================================"
|
||||
|
||||
set_property STEPS.SYNTH_DESIGN.ARGS.FLATTEN_HIERARCHY rebuilt [get_runs synth_1]
|
||||
set_property STEPS.SYNTH_DESIGN.ARGS.KEEP_EQUIVALENT_REGISTERS true [get_runs synth_1]
|
||||
|
||||
set synth_start [clock seconds]
|
||||
launch_runs synth_1 -jobs 8
|
||||
wait_on_run synth_1
|
||||
set synth_elapsed [expr {[clock seconds] - $synth_start}]
|
||||
|
||||
set synth_status [get_property STATUS [get_runs synth_1]]
|
||||
puts " Synthesis status: $synth_status"
|
||||
puts " Synthesis time: ${synth_elapsed}s ([expr {$synth_elapsed/60}]m [expr {$synth_elapsed%60}]s)"
|
||||
|
||||
if {[string match "*ERROR*" $synth_status] || [string match "*FAILED*" $synth_status]} {
|
||||
puts "CRITICAL: SYNTHESIS FAILED — aborting build"
|
||||
close_project
|
||||
exit 1
|
||||
}
|
||||
|
||||
# Post-synth timing (for comparison)
|
||||
open_run synth_1 -name synth_1
|
||||
report_timing_summary -delay_type min_max -max_paths 10 -file "${report_dir}/01_timing_post_synth.rpt"
|
||||
report_utilization -file "${report_dir}/01_utilization_post_synth.rpt"
|
||||
close_design
|
||||
|
||||
# ==============================================================================
|
||||
# 3. Implementation (opt → place → phys_opt → route → post_route_phys_opt)
|
||||
# ==============================================================================
|
||||
|
||||
puts ""
|
||||
puts "================================================================"
|
||||
puts " Phase 2/5: Implementation"
|
||||
puts "================================================================"
|
||||
|
||||
# Aggressive directives for best timing
|
||||
set_property STEPS.OPT_DESIGN.ARGS.DIRECTIVE Explore [get_runs impl_1]
|
||||
set_property STEPS.PLACE_DESIGN.ARGS.DIRECTIVE ExtraTimingOpt [get_runs impl_1]
|
||||
set_property STEPS.PHYS_OPT_DESIGN.ARGS.DIRECTIVE AggressiveExplore [get_runs impl_1]
|
||||
set_property STEPS.PHYS_OPT_DESIGN.IS_ENABLED true [get_runs impl_1]
|
||||
set_property STEPS.ROUTE_DESIGN.ARGS.DIRECTIVE AggressiveExplore [get_runs impl_1]
|
||||
set_property STEPS.POST_ROUTE_PHYS_OPT_DESIGN.IS_ENABLED true [get_runs impl_1]
|
||||
set_property STEPS.POST_ROUTE_PHYS_OPT_DESIGN.ARGS.DIRECTIVE AggressiveExplore [get_runs impl_1]
|
||||
|
||||
set impl_start [clock seconds]
|
||||
launch_runs impl_1 -jobs 8
|
||||
wait_on_run impl_1
|
||||
set impl_elapsed [expr {[clock seconds] - $impl_start}]
|
||||
|
||||
set impl_status [get_property STATUS [get_runs impl_1]]
|
||||
puts " Implementation status: $impl_status"
|
||||
puts " Implementation time: ${impl_elapsed}s ([expr {$impl_elapsed/60}]m [expr {$impl_elapsed%60}]s)"
|
||||
|
||||
if {![string match "*Complete*" $impl_status] && ![string match "*write_bitstream*" $impl_status]} {
|
||||
puts "CRITICAL: IMPLEMENTATION FAILED: $impl_status"
|
||||
close_project
|
||||
exit 1
|
||||
}
|
||||
|
||||
# ==============================================================================
|
||||
# 4. Bitstream Generation
|
||||
# ==============================================================================
|
||||
|
||||
puts ""
|
||||
puts "================================================================"
|
||||
puts " Phase 3/5: Bitstream Generation"
|
||||
puts "================================================================"
|
||||
|
||||
set bit_start [clock seconds]
|
||||
# Handle case where Vivado auto-proceeds to write_bitstream after impl
|
||||
if {[catch {launch_runs impl_1 -to_step write_bitstream -jobs 8} launch_err]} {
|
||||
puts " Note: write_bitstream may already be in progress: $launch_err"
|
||||
}
|
||||
wait_on_run impl_1
|
||||
set bit_elapsed [expr {[clock seconds] - $bit_start}]
|
||||
puts " Bitstream time: ${bit_elapsed}s"
|
||||
|
||||
# Copy bitstream to known location
|
||||
set bit_src "${project_dir}/aeris10_radar.runs/impl_1/${top_module}.bit"
|
||||
if {[file exists $bit_src]} {
|
||||
file copy -force $bit_src "${bitstream_dir}/${top_module}_${build_tag}.bit"
|
||||
puts " Bitstream: ${bitstream_dir}/${top_module}_${build_tag}.bit"
|
||||
puts " Size: [file size $bit_src] bytes"
|
||||
} else {
|
||||
puts " WARNING: Bitstream file not found at $bit_src"
|
||||
}
|
||||
|
||||
# ==============================================================================
|
||||
# 5. Comprehensive Report Generation
|
||||
# ==============================================================================
|
||||
|
||||
puts ""
|
||||
puts "================================================================"
|
||||
puts " Phase 4/5: Report Generation (15-point checklist)"
|
||||
puts "================================================================"
|
||||
|
||||
# Open the routed design for reporting
|
||||
open_run impl_1 -name impl_1
|
||||
|
||||
# --- Checklist Item 2: Timing Summary ---
|
||||
puts " [2/15] Timing Summary..."
|
||||
report_timing_summary -delay_type min_max -max_paths 100 \
|
||||
-report_unconstrained \
|
||||
-file "${report_dir}/02_timing_summary.rpt"
|
||||
|
||||
# --- Checklist Item 3: Clock Analysis ---
|
||||
puts " [3/15] Clock Analysis..."
|
||||
report_clocks -file "${report_dir}/03_clocks.rpt"
|
||||
report_clock_interaction -delay_type min_max \
|
||||
-file "${report_dir}/03_clock_interaction.rpt"
|
||||
report_clock_networks -file "${report_dir}/03_clock_networks.rpt"
|
||||
|
||||
# --- Checklist Item 4: Utilization ---
|
||||
puts " [4/15] Utilization..."
|
||||
report_utilization -file "${report_dir}/04_utilization.rpt"
|
||||
report_utilization -hierarchical -file "${report_dir}/04_utilization_hierarchical.rpt"
|
||||
|
||||
# --- Checklist Item 5: Power ---
|
||||
puts " [5/15] Power Report..."
|
||||
report_power -file "${report_dir}/05_power.rpt"
|
||||
|
||||
# --- Checklist Item 6: DRC ---
|
||||
puts " [6/15] DRC..."
|
||||
report_drc -file "${report_dir}/06_drc.rpt"
|
||||
|
||||
# --- Checklist Item 7: IO and Constraints ---
|
||||
puts " [7/15] IO Report..."
|
||||
report_io -file "${report_dir}/07_io.rpt"
|
||||
report_timing -from [all_inputs] -to [all_outputs] -max_paths 20 \
|
||||
-file "${report_dir}/07_io_timing.rpt"
|
||||
|
||||
# --- Checklist Item 8: Congestion Analysis ---
|
||||
puts " [8/15] Congestion Analysis..."
|
||||
report_design_analysis -congestion -file "${report_dir}/08_congestion.rpt"
|
||||
|
||||
# --- Checklist Item 9: Route Status ---
|
||||
puts " [9/15] Route Status..."
|
||||
report_route_status -file "${report_dir}/09_route_status.rpt"
|
||||
|
||||
# --- Checklist Item 10: Critical Paths ---
|
||||
puts " [10/15] Critical Paths..."
|
||||
report_timing -max_paths 20 -sort_by slack -nworst 5 \
|
||||
-file "${report_dir}/10_critical_paths_setup.rpt"
|
||||
report_timing -delay_type min -max_paths 20 -sort_by slack -nworst 5 \
|
||||
-file "${report_dir}/10_critical_paths_hold.rpt"
|
||||
report_high_fanout_nets -timing -load_type -max_nets 20 \
|
||||
-file "${report_dir}/10_high_fanout_nets.rpt"
|
||||
|
||||
# --- Checklist Item 11: QoR Summary ---
|
||||
puts " [11/15] QoR Summary..."
|
||||
report_design_analysis -timing -file "${report_dir}/11_design_analysis_timing.rpt"
|
||||
report_design_analysis -logic_level_distribution -file "${report_dir}/11_logic_level_dist.rpt"
|
||||
report_methodology -file "${report_dir}/11_methodology.rpt"
|
||||
|
||||
# --- Checklist Item 12: CDC Analysis ---
|
||||
puts " [12/15] CDC Analysis..."
|
||||
report_cdc -details -file "${report_dir}/12_cdc.rpt"
|
||||
|
||||
# --- Checklist Item 13: Log Scan (captured separately in build log) ---
|
||||
puts " [13/15] Log scan — see build21.log"
|
||||
|
||||
# --- Additional reports ---
|
||||
puts " \[extra\] Generating additional diagnostic reports..."
|
||||
|
||||
# report_exceptions can fail in Vivado 2025.2 — wrap in catch
|
||||
if {[catch {report_exceptions -file "${report_dir}/13_exceptions.rpt"} err]} {
|
||||
puts " WARNING: report_exceptions failed: $err"
|
||||
puts " (Known Vivado 2025.2 issue — non-critical)"
|
||||
}
|
||||
if {[catch {check_timing -verbose -file "${report_dir}/13_check_timing.rpt"} err]} {
|
||||
puts " WARNING: check_timing failed: $err"
|
||||
puts " (Known Vivado 2025.2 issue — non-critical)"
|
||||
}
|
||||
|
||||
# Compile configuration summary into a single text file
|
||||
set summary_fh [open "${report_dir}/00_build21_summary.txt" w]
|
||||
puts $summary_fh "================================================================"
|
||||
puts $summary_fh " AERIS-10 Build 21 — FFT Optimizations + E2E RTL Fixes"
|
||||
puts $summary_fh "================================================================"
|
||||
puts $summary_fh ""
|
||||
puts $summary_fh "Build Tag: $build_tag"
|
||||
puts $summary_fh "Build Timestamp: $build_timestamp"
|
||||
puts $summary_fh "FPGA Part: $fpga_part"
|
||||
puts $summary_fh "Top Module: $top_module"
|
||||
puts $summary_fh "RTL Files: $file_count"
|
||||
puts $summary_fh "Synth Status: $synth_status"
|
||||
puts $summary_fh "Synth Time: ${synth_elapsed}s"
|
||||
puts $summary_fh "Impl Status: $impl_status"
|
||||
puts $summary_fh "Impl Time: ${impl_elapsed}s"
|
||||
puts $summary_fh "Bitstream Time: ${bit_elapsed}s"
|
||||
puts $summary_fh ""
|
||||
|
||||
# Extract key timing numbers — use catch to handle empty STATS properties
|
||||
# (Vivado 2025.2 may return empty strings after write_bitstream auto-launch)
|
||||
puts $summary_fh "--- Timing ---"
|
||||
if {[catch {set wns [get_property STATS.WNS [current_design]]}] || $wns eq ""} { set wns "N/A" }
|
||||
if {[catch {set tns [get_property STATS.TNS [current_design]]}] || $tns eq ""} { set tns "N/A" }
|
||||
if {[catch {set whs [get_property STATS.WHS [current_design]]}] || $whs eq ""} { set whs "N/A" }
|
||||
if {[catch {set ths [get_property STATS.THS [current_design]]}] || $ths eq ""} { set ths "N/A" }
|
||||
if {[catch {set fail_ep [get_property STATS.TPWS [current_design]]}] || $fail_ep eq ""} { set fail_ep "N/A" }
|
||||
puts $summary_fh " WNS: $wns ns"
|
||||
puts $summary_fh " TNS: $tns ns"
|
||||
puts $summary_fh " WHS: $whs ns"
|
||||
puts $summary_fh " THS: $ths ns"
|
||||
puts $summary_fh ""
|
||||
puts $summary_fh " Build 20 Baseline: WNS = +0.426 ns, WHS = +0.058 ns"
|
||||
puts $summary_fh " Gap 2 Build (ref): WNS = +0.078 ns, WHS = +0.054 ns"
|
||||
if {[string is double -strict $wns]} {
|
||||
puts $summary_fh " Delta WNS vs B20: [expr {$wns - 0.426}] ns"
|
||||
} else {
|
||||
puts $summary_fh " Delta WNS vs B20: N/A (timing stats unavailable)"
|
||||
}
|
||||
if {[string is double -strict $whs]} {
|
||||
puts $summary_fh " Delta WHS vs B20: [expr {$whs - 0.058}] ns"
|
||||
} else {
|
||||
puts $summary_fh " Delta WHS vs B20: N/A (timing stats unavailable)"
|
||||
}
|
||||
puts $summary_fh ""
|
||||
|
||||
# Extract utilization
|
||||
puts $summary_fh "--- Utilization ---"
|
||||
set lut_used [llength [get_cells -hierarchical -filter {PRIMITIVE_TYPE =~ CLB.LUT.*}]]
|
||||
set ff_used [llength [get_cells -hierarchical -filter {PRIMITIVE_TYPE =~ CLB.FF.*}]]
|
||||
set bram_used [llength [get_cells -hierarchical -filter {PRIMITIVE_TYPE =~ BMEM.*}]]
|
||||
set dsp_used [llength [get_cells -hierarchical -filter {PRIMITIVE_TYPE =~ MULT.DSP.*}]]
|
||||
puts $summary_fh " LUTs: $lut_used / 134600"
|
||||
puts $summary_fh " FFs: $ff_used / 269200"
|
||||
puts $summary_fh " BRAM: $bram_used cells"
|
||||
puts $summary_fh " DSP: $dsp_used cells"
|
||||
puts $summary_fh ""
|
||||
puts $summary_fh " Build 20 Baseline: LUTs=6092, FFs=9024, BRAM=16, DSP=140"
|
||||
puts $summary_fh " Gap 2 Build (ref): LUTs=6343, FFs=9197, BRAM=16, DSP=140"
|
||||
puts $summary_fh " Expected Build 21: DSP ~139 (−1 from barrel-shift twiddle)"
|
||||
puts $summary_fh ""
|
||||
|
||||
# Route status
|
||||
set unrouted [llength [get_nets -hierarchical -filter {ROUTE_STATUS == UNROUTED}]]
|
||||
puts $summary_fh "--- Route ---"
|
||||
puts $summary_fh " Unrouted nets: $unrouted"
|
||||
puts $summary_fh ""
|
||||
|
||||
# MMCM usage
|
||||
puts $summary_fh "--- MMCM Usage (Gap 7) ---"
|
||||
set mmcm_count [llength [get_cells -hierarchical -filter {PRIMITIVE_TYPE =~ CLOCK.MMCM.*}]]
|
||||
puts $summary_fh " MMCME2 used: $mmcm_count / 10"
|
||||
puts $summary_fh " Expected: 1 (adc_clk_mmcm jitter cleaner)"
|
||||
puts $summary_fh ""
|
||||
|
||||
# Bitstream
|
||||
if {[file exists $bit_src]} {
|
||||
puts $summary_fh "--- Bitstream ---"
|
||||
puts $summary_fh " File: ${top_module}_${build_tag}.bit"
|
||||
puts $summary_fh " Size: [file size $bit_src] bytes"
|
||||
} else {
|
||||
puts $summary_fh "--- Bitstream ---"
|
||||
puts $summary_fh " WARNING: NOT GENERATED"
|
||||
}
|
||||
puts $summary_fh ""
|
||||
|
||||
# Signoff
|
||||
puts $summary_fh "--- Final Signoff ---"
|
||||
set signoff_pass 1
|
||||
if {![string is double -strict $wns]} {
|
||||
puts $summary_fh " WARN: WNS = N/A (timing stats unavailable — check reports)"
|
||||
} elseif {$wns < 0} {
|
||||
puts $summary_fh " FAIL: WNS = $wns (negative slack)"
|
||||
set signoff_pass 0
|
||||
} else {
|
||||
puts $summary_fh " PASS: WNS = $wns ns (no setup violations)"
|
||||
}
|
||||
if {![string is double -strict $whs]} {
|
||||
puts $summary_fh " WARN: WHS = N/A (timing stats unavailable — check reports)"
|
||||
} elseif {$whs < 0} {
|
||||
puts $summary_fh " FAIL: WHS = $whs (hold violation)"
|
||||
set signoff_pass 0
|
||||
} else {
|
||||
puts $summary_fh " PASS: WHS = $whs ns (no hold violations)"
|
||||
}
|
||||
if {![string is double -strict $tns]} {
|
||||
puts $summary_fh " WARN: TNS = N/A (timing stats unavailable — check reports)"
|
||||
} elseif {$tns != 0} {
|
||||
puts $summary_fh " FAIL: TNS = $tns (total negative slack)"
|
||||
set signoff_pass 0
|
||||
} else {
|
||||
puts $summary_fh " PASS: TNS = 0 ns"
|
||||
}
|
||||
if {$unrouted > 0} {
|
||||
puts $summary_fh " FAIL: $unrouted unrouted nets"
|
||||
set signoff_pass 0
|
||||
} else {
|
||||
puts $summary_fh " PASS: All nets routed"
|
||||
}
|
||||
if {[file exists $bit_src]} {
|
||||
puts $summary_fh " PASS: Bitstream generated"
|
||||
} else {
|
||||
puts $summary_fh " FAIL: No bitstream"
|
||||
set signoff_pass 0
|
||||
}
|
||||
puts $summary_fh ""
|
||||
|
||||
# Timing regression check vs Build 20
|
||||
if {[string is double -strict $wns] && $wns < 0.078} {
|
||||
puts $summary_fh " *** WARNING: WNS REGRESSED below Gap 2 build (was +0.078 ns, now $wns ns) ***"
|
||||
puts $summary_fh " *** Review critical paths — FFT opts or RTL fixes may have introduced new timing pressure ***"
|
||||
}
|
||||
if {[string is double -strict $whs] && $whs < 0.054} {
|
||||
puts $summary_fh " *** WARNING: WHS REGRESSED below Gap 2 build (was +0.054 ns, now $whs ns) ***"
|
||||
}
|
||||
|
||||
if {$signoff_pass} {
|
||||
puts $summary_fh " *** SIGNOFF: PASS ***"
|
||||
} else {
|
||||
puts $summary_fh " *** SIGNOFF: FAIL ***"
|
||||
}
|
||||
|
||||
close $summary_fh
|
||||
puts " Summary written to: ${report_dir}/00_build21_summary.txt"
|
||||
|
||||
# ==============================================================================
|
||||
# 6. SDF + Timing Netlist (for post-route simulation)
|
||||
# ==============================================================================
|
||||
|
||||
puts ""
|
||||
puts "================================================================"
|
||||
puts " Phase 5/5: SDF + Timing Netlist"
|
||||
puts "================================================================"
|
||||
|
||||
write_verilog -force -mode timesim "${sim_dir}/post_impl_timesim.v"
|
||||
write_sdf -force "${sim_dir}/post_impl_timesim.sdf"
|
||||
|
||||
close_design
|
||||
open_run synth_1 -name synth_1
|
||||
write_verilog -force -mode funcsim "${sim_dir}/post_synth_funcsim.v"
|
||||
|
||||
# ==============================================================================
|
||||
# Done
|
||||
# ==============================================================================
|
||||
|
||||
set build_total [expr {[clock seconds] - $build_start}]
|
||||
set build_end [clock format [clock seconds] -format {%Y-%m-%d %H:%M:%S}]
|
||||
|
||||
puts ""
|
||||
puts "================================================================"
|
||||
puts " BUILD 21 COMPLETE"
|
||||
puts "================================================================"
|
||||
puts " Started: $build_timestamp"
|
||||
puts " Finished: $build_end"
|
||||
puts " Total time: ${build_total}s ([expr {$build_total/60}]m [expr {$build_total%60}]s)"
|
||||
puts " Synth: ${synth_elapsed}s"
|
||||
puts " Impl: ${impl_elapsed}s"
|
||||
puts " Bitstream: ${bit_elapsed}s"
|
||||
puts " Reports: $report_dir"
|
||||
puts " Bitstream: ${bitstream_dir}/${top_module}_${build_tag}.bit"
|
||||
puts " WNS: $wns ns | WHS: $whs ns | TNS: $tns ns"
|
||||
puts " Build 20 baseline: WNS +0.426 | WHS +0.058"
|
||||
puts " Gap 2 build (ref): WNS +0.078 | WHS +0.054"
|
||||
if {$signoff_pass} {
|
||||
puts " SIGNOFF: PASS"
|
||||
} else {
|
||||
puts " SIGNOFF: FAIL"
|
||||
}
|
||||
puts "================================================================"
|
||||
|
||||
close_project
|
||||
puts "Done."
|
||||
Reference in New Issue
Block a user