NawfalMotii79
44 lines
1.4 KiB
C
44 lines
1.4 KiB
C
#ifndef HARDWARE_CONFIG_H
|
|
|
|
#define HARDWARE_CONFIG_H
|
|
|
|
#include "stm32f7xx_hal.h"
|
|
|
|
#define GPIO_VR GPIOB
|
|
#define EN_32 GPIO_PIN_14 //Active High
|
|
#define EN_42 GPIO_PIN_15 //Active High
|
|
|
|
#define GPIO_si5351 GPIOB
|
|
#define SI5351_CLK_EN GPIO_PIN_4 //Active Low
|
|
#define SI5351_SS_EN GPIO_PIN_5 //Active High (Spread Spectrum)
|
|
|
|
#define GPIO_ADF GPIOD
|
|
#define ADF_CS GPIO_PIN_0 //Active Low
|
|
#define ADF_CE GPIO_PIN_1 //Active High (Chip Enable)
|
|
#define ADF_DELSTR GPIO_PIN_2 //Delay Strobe/ 1=adjustment needed/ adjustment is made after GPIO_PIN_ssing from 1 to 0
|
|
#define ADF_DELADJ GPIO_PIN_3 // Delay Adjustment/ 0=ensures that delay of RF is reduced when ADF_DELSTR is asserted/ 0!=1
|
|
|
|
#define GPIO_LED GPIOD
|
|
#define LED_1 GPIO_PIN_10
|
|
#define LED_2 GPIO_PIN_11
|
|
#define LED_3 GPIO_PIN_12
|
|
#define LED_4 GPIO_PIN_13
|
|
|
|
#define GPIO_ADAR GPIOA
|
|
#define CS_ADAR_1 GPIO_PIN_8
|
|
#define CS_ADAR_2 GPIO_PIN_9
|
|
#define CS_ADAR_3 GPIO_PIN_10
|
|
#define CS_ADAR_4 GPIO_PIN_11
|
|
|
|
#define GPIO_DIG GPIOC
|
|
#define DIG_0 GPIO_PIN_0 // 0 = RX mode, 1 = TX mode
|
|
#define DIG_1 GPIO_PIN_1 // Send RX ADC start frame of (83x83) to FT2232HQ_FPGA
|
|
#define DIG_2 GPIO_PIN_2 // Enable = 1 / Disable = 0 RX mixer
|
|
#define DIG_3 GPIO_PIN_3 // Enable = 1 / Disable = 0 RX mixer
|
|
#define DIG_4 GPIO_PIN_4 //
|
|
#define DIG_5 GPIO_PIN_5
|
|
#define DIG_6 GPIO_PIN_6
|
|
#define DIG_7 GPIO_PIN_7
|
|
|
|
#endif // HARDWARE_CONFIG_H
|