- Bandwidth 500 MHz -> 20 MHz, sample rate 4 MHz -> 100 MHz (DDC output)
- Range formula: deramped FMCW -> matched-filter c/(2*Fs)*decimation
- Velocity formula: use PRI (167 us) and chirps_per_subframe (16)
- Carrier frequency: 10.525 GHz -> 10.5 GHz per radar_scene.py
- Range per bin: 4.8 m -> 24 m, max range: 307 m -> 1536 m
- Fix simulator target spawn range to match new coverage (50-1400 m)
- Remove dead BANDWIDTH constant, add SAMPLE_RATE to V65 Tk
- All 174 tests pass, ruff clean
Add SoftwareFPGA class that imports golden_reference functions to
replicate the FPGA pipeline in software, enabling bit-accurate replay
of raw IQ, FPGA co-sim, and HDF5 recordings through the same
dashboard path as live data.
New modules: software_fpga.py, replay.py (ReplayEngine + 3 loaders)
Enhanced: WaveformConfig model, extract_targets_from_frame() in
processing, ReplayWorker with thread-safe playback controls,
dashboard replay UI with transport controls and dual-dispatch
FPGA parameter routing.
Removed: ReplayConnection (from radar_protocol, hardware, dashboard,
tests) — replaced by the unified replay architecture.
150/150 tests pass, ruff clean.
- workers.py: Only emit playbackStateChanged on state transitions to
prevent stale 'playing' signal from overwriting pause button text
- dashboard.py: Force C locale on all QDoubleSpinBox instances so
comma-decimal locales don't break numeric input; add missing
'Saturation' legend label to AGC chart
- map_widget.py: Enable LocalContentCanAccessRemoteUrls and set HTTP
base URL so Leaflet CDN tiles/scripts load correctly in QtWebEngine
State machine fixes:
1. Raw IQ replay EOF now calls _stop_radar() to fully restore UI
2. Worker thread finished signal triggers UI recovery on crash/exit
3. _stop_radar() stops demo simulator to prevent cross-mode interference
4. _stop_demo() correctly identifies Mock mode via combo text
5. Demo start no longer clobbers status bar when acquisition is running
6. _stop_radar() resets playback button text, frame counter, file label
7. _start_raw_iq_replay() error path cleans up stale controller/worker
8. _refresh_gui() preserves Raw IQ paused status instead of overwriting
Map/location:
- RawIQReplayWorker now receives _radar_position (GPSData ref) so
targets get real lat/lon projected from the virtual radar position
- Added heading control to Map tab sidebar (0-360 deg, wrapping)
- Manual lat/lon/heading changes in Map tab apply to replay targets
Ruff clean, 120/120 tests pass.
Add a 4th connection mode to the V7 dashboard that loads raw complex IQ
captures (.npy) and runs the full FPGA signal processing chain in software:
quantize → AGC → Range FFT → Doppler FFT → MTI → DC notch → CFAR.
Implementation (7 steps):
- v7/agc_sim.py: bit-accurate AGC runtime extracted from adi_agc_analysis.py
- v7/processing.py: RawIQFrameProcessor (full signal chain) + shared
extract_targets_from_frame() for bin-to-physical conversion
- v7/raw_iq_replay.py: RawIQReplayController with thread-safe playback
state machine (play/pause/stop/step/seek/loop/FPS)
- v7/workers.py: RawIQReplayWorker (QThread) emitting same signals as
RadarDataWorker + playback state/index signals
- v7/dashboard.py: mode combo entry, playback controls UI, dynamic
RangeDopplerCanvas that adapts to any frame size
Bug fixes included:
- RangeDopplerCanvas no longer hardcodes 64x32; resizes dynamically
- Doppler centre bin uses n_doppler//2 instead of hardcoded 16
- Shared target extraction eliminates duplicate code between workers
Ruff clean, 120/120 tests pass.
Jason