- release-notes.html: Add commits for Gaps 3-5-7-4, tagged releases table,
architectural gap status table, updated GitHub links
- implementation-log.html: Add Build 20/19/18 timeline entries, Gap 3-4-5
milestones, updated quality/build history sections
- reports.html: Update FPGA status to Build 20 baseline, MCU regression
to 20/20, report currency notice with current gap status
Adds two-layer lint pass (iverilog -Wall + custom static checks) that
catches part-select OOB errors and case-without-default warnings before
pushing to remote Vivado. Catches the exact Synth 8-524 class error that
broke Build 18 initial attempt. Lint errors abort regression; warnings
are advisory. Regenerated golden data for BRAM-migrated matched filter.
Vivado 2025.2 (Synth 8-524): overlap_copy_count is 8-bit but [9:0]
part-select was 10-bit. Changed to explicit zero-extend concat.
Added default case to FSM to suppress non-full case warning.
- Changed user_led/system_status IOSTANDARD from LVCMOS25 to LVCMOS33
to match VIOTB=3.3V needed for FT601 on Bank 16
- Added register init value for hb_counter
- Added comments documenting clock source (50 MHz FIFO0CLK at U20, Bank 14)
and expected LED toggle rates
Maps all 47 FT601 signals through FMC LPC J10 to correct FPGA pins:
- DATA[31:0] + D_CLK: Bank 15 (LA17-LA33)
- BE_N[3:0], control, status: Bank 16 (LA00-LA15)
Both banks share VIOTB rail — set to 3.3V for LVCMOS33.
Includes timing constraints and RTL adaptation notes.
B12: PA IDQ calibration loop condition inverted (< 0.2 -> > 0.2) for both DAC1/DAC2
B13: DAC2 ADC buffer mismatch — reads from hadc2 now correctly stored to adc2_readings
B14: DIAG_SECTION macro call sites changed from 2-arg to 1-arg form (4 sites)
B15: htim3 definition + MX_TIM3_Init() added (PWM mode, CH2+CH3, Period=999)
B16: Removed stale NO-OP annotation on TriggerTimedSync (already fixed in Bug #3)
B17: Updated stale GPIO-only warnings to reflect TIM3 PWM implementation (Bug #5)
All 15 tests pass (11 original + 4 new for B12-B15).
Bug #11: platform_noos_stm32.c used HAL_SPI_Transmit instead of
HAL_SPI_TransmitReceive — reads returned garbage. Changed to in-place
full-duplex. Dead code (never called), fixed per audit recommendation.
Test added: test_bug11_platform_spi_transmit_only.c. Mock infrastructure
updated with SPI spy types. All 11 firmware tests pass.
FPGA B2: Migrated long_chirp_lut[0:3599] from ~700 lines of hardcoded
assignments to BRAM with (* ram_style = "block" *) attribute and
$readmemh("long_chirp_lut.mem"). Added sync-only read block for proper
BRAM inference. 1-cycle read latency introduced. short_chirp_lut left
as distributed RAM (60 entries, too small for BRAM).
FPGA B3: Added BREG (window_val_reg) and MREG (mult_i_raw/mult_q_raw)
pipeline stages to doppler_processor.v. Eliminates DPIP-1 and DPOP-2
DRC warnings. S_LOAD_FFT retimed: fft_input_valid starts at sub=2,
+1 cycle total latency. BREG primed in S_PRE_READ at no extra cost.
Both FPGA files compile clean with Icarus Verilog.
Bug #9: Both TX and RX SPI init params had platform_ops = NULL, causing
adf4382_init() -> no_os_spi_init() to fail with -EINVAL. Fixed by setting
platform_ops = &stm32_spi_ops and passing stm32_spi_extra with correct CS
port/pin for each device.
Bug #10: stm32_spi_write_and_read() never toggled chip select. Since TX
and RX ADF4382A share SPI4, every register write hit both PLLs. Rewrote
stm32_spi.c to assert CS LOW before transfer and deassert HIGH after,
using stm32_spi_extra metadata. Backward-compatible: legacy callers
(e.g., AD9523) with cs_port=NULL skip CS management.
Also widened chip_select from uint8_t to uint16_t in no_os_spi.h since
STM32 GPIO_PIN_xx values (e.g., GPIO_PIN_14=0x4000) overflow uint8_t.
10/10 tests pass (8 original + 2 new regression tests).
Observe-before-fix instrumentation for bench bring-up: adds timestamped
DIAG logging to the AD9523 clock config, ADF4382A LO manager, power
sequencing, lock monitoring, temperature monitoring, and safe-mode entry.
Annotates known bugs (double ad9523_setup call, timed-sync init ordering,
TriggerTimedSync no-op, phase-shift before init-check, last_check timer
collision) without changing any runtime behavior.
Jason
NawfalMotii79