FlintyLemming/PLFM_RADAR
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
289 Commits 17 Branches 0 Tags
feat/um982-gps-driver
Commit Graph

3 Commits

Author SHA1 Message Date
Jason ffba27a10a feat: hybrid AGC (FPGA phases 1-3 + GUI phase 6) with timing fix 
FPGA:
- rx_gain_control.v rewritten: per-frame peak/saturation tracking,
  auto-shift AGC with attack/decay/holdoff, signed gain -7 to +7
- New registers 0x28-0x2C (agc_enable/target/attack/decay/holdoff)
- status_words[4] carries AGC metrics (gain, peak, sat_count, enable)
- DIG_5 GPIO outputs saturation flag for STM32 outer loop
- Both USB interfaces (FT601 + FT2232H) updated with AGC status ports

Timing fix (WNS +0.001ns -> +0.045ns, 45x improvement):
- CIC max_fanout 4->16 on valid pipeline registers
- +200ps setup uncertainty on 400MHz domain
- ExtraNetDelay_high placement + AggressiveExplore routing

GUI:
- AGC opcodes + status parsing in radar_protocol.py
- AGC control groups in both tkinter and V7 PyQt dashboards
- 11 new AGC tests (103/103 GUI tests pass)

Cross-layer:
- AGC opcodes/defaults/status assertions added (29/29 pass)
- contract_parser.py: fixed comment stripping in concat parser

All tests green: 25 FPGA + 103 GUI + 29 cross-layer = 157 pass
 2026-04-13 19:24:11 +05:45
Jason 408f4d126f feat(usb): add FT2232H USB 2.0 interface for 50T production board 
Replace FT601 (USB 3.0, 32-bit) with FT2232H (USB 2.0, 8-bit) on the
50T production board per updated Eagle schematic (commit 0db0e7b).
USB 3.0 via FT601 remains available on the 200T premium board.

RTL changes:
- Add usb_data_interface_ft2232h.v: 245 Sync FIFO interface with toggle
  CDC (3-stage) for reliable 100MHz->60MHz clock domain crossing,
  mux-based byte serialization for 11-byte data packets, 26-byte status
  packets, and 4-byte sequential command read FSM
- Add USB_MODE parameter to radar_system_top.v with generate block:
  USB_MODE=0 selects FT601 (200T), USB_MODE=1 selects FT2232H (50T)
- Wire FT2232H ports in radar_system_top_50t.v with USB_MODE=1 override,
  connect ft_clkout to shared clock input port
- Add post-DSP retiming register in ddc_400m.v to fix marginal 400MHz
  timing path (WNS improved from +0.070ns to +0.088ns)

Constraints:
- Add FT2232H pin assignments for all 15 signals on Bank 35 (LVCMOS33)
- Add 60MHz ft_clkout clock constraint (16.667ns) on MRCC N-type pin C4
- Add CLOCK_DEDICATED_ROUTE FALSE for N-type MRCC workaround
- Add CDC false paths between ft_clkout and clk_100m/clk_120m_dac

Build scripts:
- Add PLIO-9 DRC demotion and CLOCK_DEDICATED_ROUTE property in build_50t.tcl
- Add usb_data_interface_ft2232h.v to build_200t.tcl explicit file list

Python host:
- Add FT2232HConnection class using pyftdi SyncFIFO (VID 0x0403:0x6010)
- Add compact 11-byte packet parser for FT2232H data packets
- Update RadarAcquisition to support both FT601 and FT2232H connections

Test results:
- iverilog regression: 23/23 PASS
- Vivado Build 15 (XC7A50T): WNS=+0.088ns, WHS=+0.059ns, 0 violations
- DSP48E1: 112/120 (93.3%), LUTs: 10,060/32,600 (30.9%)
 2026-04-07 19:22:16 +03:00
Jason 849b32240b fix(xdc): add hold false_path for ADC IDDR + reorganize build scripts by target 
- Add set_false_path -hold for source-synchronous ADC IDDR paths in
  adc_clk_mmcm.xdc (eliminates 8 hold violations from build 12)
- Add DDR falling-edge input delay constraints to xc7a50t_ftg256.xdc
  (parity with 200T XDC)
- Reorganize scripts/ into target subdirectories: 50t/, 200t/, te0712/,
  te0713/, utils/ so users can run the correct build for their hardware
- Delete obsolete build scripts (build17-20) superseded by build_50t/200t
- Update project_root paths in all moved scripts (.. -> ../..)
 2026-04-07 15:13:13 +03:00