A low-cost, hackable 10.5 GHz phased array radar system with Pulse LFM modulation. Designed for researchers, drone developers, and serious SDR enthusiasts.
- -Democratizing radar technology through open-source hardware and software
-Designed for researchers, drone developers, and SDR enthusiasts who need a capable, hackable radar platform.
-Complete schematics, PCB layouts, firmware, and software available for modification and learning.
-FPGA-based signal processing for pulse compression, Doppler FFT, MTI, and CFAR detection.
-Real-time position tracking, attitude correction, and map visualization for geolocated targets.
-Two versions available to match your range requirements
-| Specification | -AERIS-10N (Nexus) | -AERIS-10X (Extended) | -
|---|---|---|
| Frequency | 10.5 GHz | 10.5 GHz |
| Max Range | 3 km | 20 km |
| Antenna Type | 8×16 Patch Array | 32×16 Slotted Waveguide |
| Beam Steering | Electronic (±45°) | Electronic (±45°) |
| Mechanical Scan | 360° (stepper motor) | 360° (stepper motor) |
| Output Power | ~1W | 10W (GaN amplifier) |
| Processing | FPGA + STM32 | FPGA + STM32 |
Modular design with specialized components for optimal performance
--┌─────────────────────────────────────────────────────────────┐ -│ Antenna Array │ -│ (8x16 patch / 32x16 slotted waveguide) │ -└─────────────────────┬───────────────────────────────────────┘ - │ -┌─────────────────────┴───────────────────────────────────────┐ -│ Main Board │ -│ ┌───────────────┐ ┌──────────────┐ ┌─────────────────┐ │ -│ │ XC7A100T │ │ STM32F746 │ │ 16x ADTR1107 │ │ -│ │ FPGA │ │ MCU │ │ Front End │ │ -│ └───────────────┘ └──────────────┘ └─────────────────┘ │ -│ ┌───────────────┐ ┌──────────────┐ ┌─────────────────┐ │ -│ │ 4x ADAR1000 │ │ 2x ADF4382 │ │ 2x LT5552 │ │ -│ │ Phase Shift │ │ Synthesizers│ │ Mixers │ │ -│ └───────────────┘ └──────────────┘ └─────────────────┘ │ -└─────────────────────┬───────────────────────────────────────┘ - │ -┌─────────────────────┴───────────────────────────────────────┐ -│ Support Modules │ -│ ┌───────────────┐ ┌──────────────┐ ┌─────────────────┐ │ -│ │ AD9523-1 │ │ GPS Module │ │ GY-85 IMU │ │ -│ │ Clock Gen │ │ │ │ │ │ -│ └───────────────┘ └──────────────┘ └─────────────────┘ │ -└─────────────────────────────────────────────────────────────┘ --
Supplies all necessary voltage levels with proper filtering and sequencing (controlled by microcontroller).
-High-performance AD9523-1 low jitter clock generator with phase-aligned references for RX/TX, DAC, ADC, and FPGA.
-DAC for chirp generation, LT5552 mixers, ADAR1000 phase shifters (4x), ADTR1107 front-end chips (16x).
-Handles PLFM chirp generation, ADC data read, AGC, I/Q down-conversion, decimation, filtering, FFT, pulse compression, Doppler, MTI & CFAR processing.
-Power sequencing, FPGA communication, peripheral configuration (clock generator, synthesizers, phase shifters, GPS, IMU, barometer, stepper motor, sensors).
-10W QPA2962 GaN amplifier for extended range capability.
-Alpha prototype - Actively seeking contributors and beta testers
-Join the open-source radar revolution
-Everything you need to build, modify, and operate the AERIS-10 radar
-Schematics, PCB layouts, BOM, and assembly instructions.
-STM32 firmware and FPGA bitstream programming guide.
-Detailed explanation of the FPGA processing pipeline.
-GUI and API reference for data visualization and control.
-Step-by-step calibration procedures for optimal performance.
-Common issues and solutions.
-