FlintyLemming/PLFM_RADAR
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

fix: resolve 3 deferred issues (STM32-006, STM32-004, FPGA-001)

Browse Source 
STM32-006: Remove blocking do-while loop that waited for legacy GUI start
flag — production V7 PyQt GUI never sends it, hanging the MCU at boot.

STM32-004: Check ad9523_init() return code and call Error_Handler() on
failure, matching the pattern used by all other hardware init calls.

FPGA-001: Simplify frame boundary detection to only trigger on
chirp_counter wrap-to-zero. Previous conditions checking == N and == 2N
were unreachable dead code (counter wraps at N-1). Now correct for any
chirps_per_elev value.
This commit is contained in:
Jason
2026-04-16 00:13:45 +05:45
parent b0e5b298fe
commit 8187771ab0
2 changed files with 22 additions and 35 deletions
Download Patch File Download Diff File Expand all files Collapse all files
9_Firmware/9_1_Microcontroller/9_1_3_C_Cpp_Code/main.cpp
+14 -25
View File
@@ -175,7 +175,7 @@ float RADAR_Altitude;
double RADAR_Longitude = 0;
double RADAR_Latitude = 0;
extern uint8_t GUI_start_flag_received;
extern uint8_t GUI_start_flag_received; // [STM32-006] Legacy, unused -- kept for linker compat
//RADAR
@@ -1177,7 +1177,14 @@ static int configure_ad9523(void)
// init ad9523 defaults (fills any missing pdata defaults)
DIAG("CLK", "Calling ad9523_init() -- fills pdata defaults");
ad9523_init(&init_param);
{
int32_t init_ret = ad9523_init(&init_param);
DIAG("CLK", "ad9523_init() returned %ld", (long)init_ret);
if (init_ret != 0) {
DIAG_ERR("CLK", "ad9523_init() FAILED (ret=%ld) -- calling Error_Handler()", (long)init_ret);
Error_Handler();
}
}
/* [Bug #2 FIXED] Removed first ad9523_setup() call that was here.
* It wrote to the chip while still in reset — writes were lost.
@@ -1800,29 +1807,11 @@ int main(void)
HAL_UART_Transmit(&huart3, (uint8_t*)gps_send_error, sizeof(gps_send_error) - 1, 1000);
}
// Check if start flag was received and settings are ready
do{
if (usbHandler.isStartFlagReceived() &&
usbHandler.getState() == USBHandler::USBState::READY_FOR_DATA) {
const RadarSettings& settings = usbHandler.getSettings();
// Use the settings to configure your radar system
/*
settings.getSystemFrequency();
settings.getChirpDuration1();
settings.getChirpDuration2();
settings.getChirpsPerPosition();
settings.getFreqMin();
settings.getFreqMax();
settings.getPRF1();
settings.getPRF2();
settings.getMaxDistance();
*/
}
}while(!usbHandler.isStartFlagReceived());
/* [STM32-006 FIXED] Removed blocking do-while loop that waited for
* usbHandler.isStartFlagReceived(). The production V7 PyQt GUI does not
* send the legacy 4-byte start flag [23,46,158,237], so this loop hung
* the MCU at boot indefinitely. The USB settings handshake (if ever
* re-enabled) should be handled non-blocking in the main loop. */
/***************************************************************/
/************RF Power Amplifier Powering up sequence************/